LibL6474-C-Library 1.0
Library Code documentation
Loading...
Searching...
No Matches
L6474_BaseParameter_t Struct Reference

#include <LibL6474.h>

Data Fields

L6474x_StepMode_t stepMode
 
L6474x_OCD_TH_t OcdTh
 
char TimeOnMin
 
char TimeOffMin
 
char TorqueVal
 
char TFast
 

Detailed Description

The L6474_BaseParameter_t structure is used to set default initialization values for the library whenever a reset has been called or the library is used the first time. It can be filled with the global defaults by calling L6474_SetBaseParameter and it then can be adapted or directly passed into L6474_Initialize which always needs to be called after resetting the stepper driver or the library

Field Documentation

◆ OcdTh

L6474x_OCD_TH_t L6474_BaseParameter_t::OcdTh

OcdTh describes the overcurrent detection threshold, see L6474x_OCD_TH_t

◆ stepMode

L6474x_StepMode_t L6474_BaseParameter_t::stepMode

stepMode describes the stepping operation mode, see L6474x_StepMode_t

◆ TFast

char L6474_BaseParameter_t::TFast

L6474_PROP_TFAST is used to change switching times

◆ TimeOffMin

char L6474_BaseParameter_t::TimeOffMin

TimeOffMin is used to change the minimum time for the OFF-part of the current control loop

◆ TimeOnMin

char L6474_BaseParameter_t::TimeOnMin

TimeOnMin is used to change the minimum time for the ON-part of the current control loop

◆ TorqueVal

char L6474_BaseParameter_t::TorqueVal

TorqueVal is used to change the current setpoint of the controller which follows directly the torque


The documentation for this struct was generated from the following file: