Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
78 lines
3.1 KiB
Markdown
78 lines
3.1 KiB
Markdown
# Frässpindel – HNP
|
||
|
||
Firmware für die Ansteuerung einer Frässpindel und eines Schrittmotors (L6474) auf einem
|
||
**STM32H755ZI** (Dual-Core: Cortex-M7 + Cortex-M4). Projekt im Rahmen von
|
||
*Hardwarenahes Programmieren von Echtzeitsystemen*.
|
||
|
||
Die eigentliche Anwendung läuft auf dem **Cortex-M7** unter FreeRTOS. Der Cortex-M4 wird nur
|
||
gestartet und über OpenAMP/HSEM synchronisiert.
|
||
|
||
## Projektstruktur
|
||
|
||
```
|
||
.
|
||
├── stepper_h7/ STM32CubeIDE-/Makefile-Projekt
|
||
│ ├── CM7/ Anwendung (Cortex-M7, FreeRTOS)
|
||
│ ├── CM4/ Cortex-M4
|
||
│ ├── Common/ gemeinsamer Startcode
|
||
│ ├── Drivers/ STM32 HAL / CMSIS
|
||
│ ├── Middlewares/ OpenAMP
|
||
│ └── stepper_h7.ioc CubeMX-Konfiguration
|
||
├── libs/ externe Bibliotheken (über relative Pfade eingebunden)
|
||
│ ├── FreeRTOS-LTS/
|
||
│ ├── LibL6474/ Schrittmotortreiber
|
||
│ ├── LibRTOSConsole/ Konsole über UART
|
||
│ ├── LibSpindle/ Spindelansteuerung
|
||
│ └── LibHALMockup/, LibCMocka/ Unit-Tests
|
||
├── spec/ Pflichtenheft, Interfacespezifikation, Laborbericht
|
||
└── doc/ Schaltpläne, Registerbeschreibungen
|
||
```
|
||
|
||
`stepper_h7` referenziert `../libs` relativ. Die Ordnerstruktur muss deshalb erhalten bleiben.
|
||
|
||
## Hardware
|
||
|
||
| Funktion | Pin | Makro (`CM7/Core/Inc/main.h`) |
|
||
|------------|------|------------------------------------------|
|
||
| LED grün | PB0 | `LED_GREEN_GPIO_Port`, `LED_GREEN_Pin` |
|
||
| LED gelb | PE1 | `LED_YELLOW_GPIO_Port`, `LED_YELLOW_Pin` |
|
||
| LED rot | PB14 | `LED_RED_GPIO_Port`, `LED_RED_Pin` |
|
||
| User-Taste | PC13 | `USR_BUTTON_GPIO_Port`, `USR_BUTTON_Pin` |
|
||
| Debug-UART | PD8/PD9 (USART3, 115200 Baud) | |
|
||
|
||
## Bauen und Flashen
|
||
|
||
### Variante A: STM32CubeIDE (Windows / macOS / Linux)
|
||
|
||
1. *File → Import → Existing Projects into Workspace* und `stepper_h7` auswählen
|
||
(`stepper_h7_CM7` und `stepper_h7_CM4` werden mit importiert).
|
||
2. `stepper_h7_CM7` (und `stepper_h7_CM4`) bauen.
|
||
3. Eine Debug-Konfiguration anlegen. Die `.launch`-Dateien sind bewusst nicht im Repo, weil sie
|
||
rechnerspezifische Pfade enthalten.
|
||
|
||
### Variante B: VS Code + Makefile
|
||
|
||
Voraussetzungen:
|
||
|
||
- [STM32CubeCLT](https://www.st.com/en/development-tools/stm32cubeclt.html)
|
||
(enthält `arm-none-eabi-gcc`, ST-LINK-GDB-Server, CubeProgrammer)
|
||
- Umgebungsvariable `STM32CLT_PATH` auf das CubeCLT-Installationsverzeichnis setzen
|
||
- `make` (macOS: `xcode-select --install`)
|
||
- VS-Code-Extensions: *Cortex-Debug*, *RTOS Views*, *C/C++*, *Serial Monitor*
|
||
|
||
```sh
|
||
cd stepper_h7
|
||
make cm7 -j # nur Cortex-M7
|
||
make all -j # M7 + M4
|
||
make clean
|
||
```
|
||
|
||
Debuggen über `stepper_h7.code-workspace` und die Konfiguration *Debug CM7 ST-Link V3*.
|
||
|
||
## Nicht im Repository
|
||
|
||
- Build-Ausgaben (`Debug/`, `build/`)
|
||
- Hersteller-Datenblätter (`doc/Datasheets/`), z. B. das
|
||
[STM32H7 Reference Manual (RM0399)](https://www.st.com/resource/en/reference_manual/rm0399-stm32h745755-and-stm32h747757-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)
|
||
- Windows-spezifische Dateien (MSVC-Projekte, DLLs/EXEs von CMocka)
|