started config function
This commit is contained in:
1 parent
6a6a1589ee
commit
f746a3fc2d
3 files changed
+169
-17
No files matched your search
@@ -4,8 +4,8 @@
|
||||
#include "semphr.h"
|
||||
|
||||
// TIM4 (Pulse an PD15) laeuft mit 200 MHz / 128, TIM1 zaehlt die Pulse (16 Bit)
|
||||
#define STEP_TICK_HZ 1562500u
|
||||
#define STEP_CHUNK 60000u
|
||||
#define STEP_TICK_HZ 1562500u //TIM4 Takt
|
||||
#define STEP_CHUNK 60000u //TIM1 16 Bit:
|
||||
#define STEP_HZ_MOVE 4000u // 300 mm/min bei 800 Schritten/mm
|
||||
#define STEP_HZ_REFERENCE 500u // 37,5 mm/min bei 800 Schritten/mm
|
||||
#define STEP_POLL_MS 50u // Treiberstatus-Abfrage waehrend der Fahrt
|
||||
@@ -60,7 +60,6 @@ void StepLibraryDelay(unsigned int ms){
|
||||
|
||||
// 1 wenn der Treiber nicht fahrbereit ist. L6474_GetStatus selbst meldet nur SPI-Fehler,
|
||||
// die Flags muessen hier ausgewertet werden. HIGHZ bleibt nach OCD/UVLO/TH_SD stehen.
|
||||
// Der Aufruf aus StepLibraryStep setzt LIBL6474_HAS_LOCKING 0 voraus.
|
||||
static int StepperHasFault(L6474_Handle_t s){
|
||||
L6474_Status_t status;
|
||||
|
||||
@@ -115,6 +114,48 @@ void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim){
|
||||
portYIELD_FROM_ISR(woken);
|
||||
}
|
||||
|
||||
static int config_stepper(L6474_Handle_t s, int param, float value){
|
||||
/*
|
||||
* param 1: torque
|
||||
* param 2: throvercurr
|
||||
* param 3: powerena
|
||||
* param 4: stepmode
|
||||
* param 5: timeoff
|
||||
* param 6: timeon
|
||||
* param 7: timefast
|
||||
* param 8: mmperturn
|
||||
* param 9: posmax
|
||||
* param 10: posmin
|
||||
* param 11: posref
|
||||
* param 12: stepsperturn
|
||||
*/
|
||||
|
||||
switch(param){
|
||||
case 1:
|
||||
|
||||
case 2:
|
||||
case 3:
|
||||
if(value == 1){
|
||||
HAL_GPIO_WritePin(STEP_RSTN_GPIO_Port, STEP_RSTN_Pin, GPIO_PIN_SET);
|
||||
}else{
|
||||
HAL_GPIO_WritePin(STEP_RSTN_GPIO_Port, STEP_RSTN_Pin, GPIO_PIN_RESET);
|
||||
}
|
||||
case 4:
|
||||
case 5:
|
||||
case 6:
|
||||
case 7:
|
||||
case 8:
|
||||
case 9:
|
||||
case 10:
|
||||
case 11:
|
||||
case 12:
|
||||
default:
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
static int StepLibraryStep( void* pPWM, int dir, unsigned int numPulses ){
|
||||
(void)pPWM;
|
||||
|
||||
@@ -145,7 +186,10 @@ static int StepLibraryStep( void* pPWM, int dir, unsigned int numPulses ){
|
||||
}
|
||||
|
||||
|
||||
|
||||
int cancel_stepper(){
|
||||
TIM1->CR1 &= ~TIM_CR1_CEN;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
L6474_Handle_t init_stepper(void* pIO, void* pGPO, void* pPWM){
|
||||
@@ -204,7 +248,7 @@ int stepper_reference(L6474_Handle_t s, int flag){
|
||||
}
|
||||
yellow_led_start();
|
||||
//flag: 0 keiner, 1 -t, 2 -e, 3 -s
|
||||
if(HAL_GPIO_ReadPin(REFERENCE_MARK_GPIO_Port, REFERENCE_MARK_Pin) == GPIO_PIN_RESET){
|
||||
if(HAL_GPIO_ReadPin(USR_BUTTON_GPIO_Port, USR_BUTTON_Pin) == GPIO_PIN_SET){
|
||||
|
||||
if(L6474_StepIncremental(s, mm_to_step(5)) != errcNONE){
|
||||
return 1;
|
||||
@@ -216,7 +260,7 @@ int stepper_reference(L6474_Handle_t s, int flag){
|
||||
if(L6474_StepIncremental(s, -1) != errcNONE){
|
||||
return 1;
|
||||
}
|
||||
if(HAL_GPIO_ReadPin(REFERENCE_MARK_GPIO_Port, REFERENCE_MARK_Pin) == GPIO_PIN_RESET){
|
||||
if(HAL_GPIO_ReadPin(USR_BUTTON_GPIO_Port, USR_BUTTON_Pin) == GPIO_PIN_SET){
|
||||
button_pressed=1;
|
||||
}
|
||||
|
||||
@@ -235,7 +279,7 @@ int stepper_reference(L6474_Handle_t s, int flag){
|
||||
if(L6474_StepIncremental(s, -1) != errcNONE){
|
||||
return 1;
|
||||
}
|
||||
if(HAL_GPIO_ReadPin(REFERENCE_MARK_GPIO_Port, REFERENCE_MARK_Pin) == GPIO_PIN_RESET){
|
||||
if(HAL_GPIO_ReadPin(USR_BUTTON_GPIO_Port, USR_BUTTON_Pin) == GPIO_PIN_SET){
|
||||
button_pressed=1;
|
||||
}
|
||||
|
||||
@@ -256,7 +300,7 @@ int stepper_pos(L6474_Handle_t s){
|
||||
if(L6474_GetAbsolutePosition(s, &position) != errcNONE){
|
||||
return 1;
|
||||
}
|
||||
printf("Stepper position: %d", position);
|
||||
printf("%d", (position/800));
|
||||
return StepperHasFault(s);
|
||||
}
|
||||
|
||||
@@ -276,7 +320,6 @@ int stepper_move(L6474_Handle_t s, int pos){
|
||||
|
||||
int pos_diff = pos - position;
|
||||
|
||||
// StepIncremental lehnt 0 Schritte als Fehler ab
|
||||
if(pos_diff != 0 && L6474_StepIncremental(s, pos_diff) != errcNONE){
|
||||
return 1;
|
||||
}
|
||||
@@ -284,19 +327,24 @@ int stepper_move(L6474_Handle_t s, int pos){
|
||||
return StepperHasFault(s);
|
||||
}
|
||||
|
||||
static void print_binary_8bit(unsigned int val) {
|
||||
for (int i = 7; i >= 0; i--) {
|
||||
int bit = (val >> i) & 1;
|
||||
printf("%d", bit);
|
||||
if (i == 4) printf(" ");
|
||||
}
|
||||
printf("\r\n");
|
||||
}
|
||||
|
||||
int StepperConsoleFunction( int argc, char** argv, void* ctx )
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
//possible commands are
|
||||
//(stepper) step 100
|
||||
|
||||
(void)argc;
|
||||
(void)argv;
|
||||
(void)ctx;
|
||||
|
||||
L6474_Handle_t h = (L6474_Handle_t)ctx;
|
||||
|
||||
// first decode the subcommand and all arguments
|
||||
if ( argc == 0 )
|
||||
{
|
||||
printf("invalid number of arguments\r\n");
|
||||
@@ -423,6 +471,110 @@ int StepperConsoleFunction( int argc, char** argv, void* ctx )
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
}
|
||||
else if (strcmp(argv[0], "status") == 0)
|
||||
{
|
||||
L6474x_State_t currentState;
|
||||
L6474_Status_t stepperStatus;
|
||||
int moving = 0;
|
||||
|
||||
// 1. get state of state machine
|
||||
if (L6474_GetState(h, ¤tState) != errcNONE)
|
||||
{
|
||||
printf("failed to get state\r\nFAIL");
|
||||
return -1;
|
||||
}
|
||||
|
||||
// 2.get driver-state
|
||||
if (L6474_GetStatus(h, &stepperStatus) != errcNONE)
|
||||
{
|
||||
printf("failed to get status\r\nFAIL");
|
||||
return -1;
|
||||
}
|
||||
|
||||
unsigned int errorBits = ((stepperStatus.WRONG_CMD & 0x01) << 8) |
|
||||
((stepperStatus.UVLO & 0x01) << 7) |
|
||||
((stepperStatus.TH_WARN & 0x01) << 6) |
|
||||
((stepperStatus.TH_SD & 0x01) << 5) |
|
||||
((stepperStatus.ONGOING & 0x01) << 4) |
|
||||
((stepperStatus.OCD & 0x01) << 3) |
|
||||
((stepperStatus.NOTPERF_CMD & 0x01) << 2) |
|
||||
((stepperStatus.HIGHZ & 0x01) << 1) |
|
||||
((stepperStatus.DIR & 0x01) << 0);
|
||||
|
||||
|
||||
|
||||
// 3. check for moving motor aka async pending operation (should be always 0 with no async mode)
|
||||
L6474_IsMoving(h, &moving);
|
||||
|
||||
|
||||
printf("0x%X\r\n", (unsigned int)currentState); //print state in first line
|
||||
printf("0x%X\r\n", errorBits); //print error flags in second line
|
||||
printf("internal error bits in binary: ");
|
||||
print_binary_8bit(errorBits);
|
||||
printf("%d\r\n", moving); //print async pending op in third line
|
||||
printf("OK");
|
||||
|
||||
return 0;
|
||||
}
|
||||
else if (strcmp(argv[0], "config") == 0)
|
||||
{
|
||||
float value = atof(argv[2]);
|
||||
|
||||
switch(atoi(argv[1])){
|
||||
case 1:
|
||||
config_stepper(h, 1, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 2:
|
||||
config_stepper(h, 2, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 3:
|
||||
config_stepper(h, 3, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 4:
|
||||
config_stepper(h, 4, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 5:
|
||||
config_stepper(h, 5, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 6:
|
||||
config_stepper(h, 6, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 7:
|
||||
config_stepper(h, 7, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 8:
|
||||
config_stepper(h, 8, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 9:
|
||||
config_stepper(h, 9, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 10:
|
||||
config_stepper(h, 10, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 11:
|
||||
config_stepper(h, 11, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
case 12:
|
||||
config_stepper(h, 12, value);
|
||||
printf("OK\r\n");
|
||||
return 0;
|
||||
default:
|
||||
printf("FAIL\r\n");
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
else
|
||||
{
|
||||
printf("passed invalid sub command\r\n");
|
||||
|
||||
Reference in new issue
Block a user