Basic Native CMSIS Register Access Documentation 1.0
The Common Microcontroller Software Interface Standard (CMSIS) simplifies microcontroller software development, providing a consistent and efficient interface for developers working with Cortex-M and entry-level Cortex-A processors. It promotes code reuse, portability, and interoperability, enabling developers to focus on application-level logic rather than dealing with low-level hardware details.
Loading...
Searching...
No Matches
stm32f7xx.h File Reference

CMSIS STM32F7xx Device Peripheral Access Layer Header File. More...

#include "stm32f746xx.h"
Include dependency graph for stm32f7xx.h:

Go to the source code of this file.

Macros

#define __STM32F7_CMSIS_VERSION_MAIN   (0x01)
 STM32 Family.
 
#define __STM32F7_CMSIS_VERSION_SUB1   (0x02)
 
#define __STM32F7_CMSIS_VERSION_SUB2   (0x0A)
 
#define __STM32F7_CMSIS_VERSION_RC   (0x00)
 
#define __STM32F7_CMSIS_VERSION
 
#define IS_FUNCTIONAL_STATE(STATE)   (((STATE) == DISABLE) || ((STATE) == ENABLE))
 
#define SET_BIT(REG, BIT)   ((REG) |= (BIT))
 
#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
 
#define READ_BIT(REG, BIT)   ((REG) & (BIT))
 
#define CLEAR_REG(REG)   ((REG) = (0x0))
 
#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
 
#define READ_REG(REG)   ((REG))
 
#define MODIFY_REG(REG, CLEARMASK, SETMASK)   WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
 
#define POSITION_VAL(VAL)   (__CLZ(__RBIT(VAL)))
 
#define ATOMIC_SET_BIT(REG, BIT)
 
#define ATOMIC_CLEAR_BIT(REG, BIT)
 
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)
 
#define ATOMIC_SETH_BIT(REG, BIT)
 
#define ATOMIC_CLEARH_BIT(REG, BIT)
 
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)
 

Typedefs

typedef enum FlagStatus ITStatus
 

Enumerations

enum  FlagStatus { RESET = 0U , SET = !RESET }
 
enum  FunctionalState { DISABLE = 0U , ENABLE = !DISABLE }
 
enum  ErrorStatus { SUCCESS = 0U , ERROR = !SUCCESS }
 

Detailed Description

CMSIS STM32F7xx Device Peripheral Access Layer Header File.

Author
MCD Application Team
     The file is the unique include file that the application programmer
     is using in the C source code, usually in main.c. This file contains:
      - Configuration section that allows to select:
         - The STM32F7xx device used in the target application
         - To use or not the peripheral's drivers in application code(i.e.
           code will be based on direct access to peripheral's registers
           rather than drivers API), this option is controlled by
           "#define USE_HAL_DRIVER"
Attention

Copyright (c) 2016 STMicroelectronics. All rights reserved.

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.