Basic Native CMSIS Register Access Documentation 1.0
The Common Microcontroller Software Interface Standard (CMSIS) simplifies microcontroller software development, providing a consistent and efficient interface for developers working with Cortex-M and entry-level Cortex-A processors. It promotes code reuse, portability, and interoperability, enabling developers to focus on application-level logic rather than dealing with low-level hardware details.
Loading...
Searching...
No Matches
Peripheral_memory_map
Collaboration diagram for Peripheral_memory_map:

Macros

#define RAMITCM_BASE   0x00000000UL
 
#define FLASHITCM_BASE   0x00200000UL
 
#define FLASHAXI_BASE   0x08000000UL
 
#define RAMDTCM_BASE   0x20000000UL
 
#define PERIPH_BASE   0x40000000UL
 
#define BKPSRAM_BASE   0x40024000UL
 
#define QSPI_BASE   0x90000000UL
 
#define FMC_R_BASE   0xA0000000UL
 
#define QSPI_R_BASE   0xA0001000UL
 
#define SRAM1_BASE   0x20010000UL
 
#define SRAM2_BASE   0x2004C000UL
 
#define FLASH_END   0x080FFFFFUL
 
#define FLASH_OTP_BASE   0x1FF0F000UL
 
#define FLASH_OTP_END   0x1FF0F41FUL
 
#define FLASH_BASE   FLASHAXI_BASE
 
#define APB1PERIPH_BASE   PERIPH_BASE
 
#define APB2PERIPH_BASE   (PERIPH_BASE + 0x00010000UL)
 
#define AHB1PERIPH_BASE   (PERIPH_BASE + 0x00020000UL)
 
#define AHB2PERIPH_BASE   (PERIPH_BASE + 0x10000000UL)
 
#define TIM2_BASE   (APB1PERIPH_BASE + 0x0000UL)
 
#define TIM3_BASE   (APB1PERIPH_BASE + 0x0400UL)
 
#define TIM4_BASE   (APB1PERIPH_BASE + 0x0800UL)
 
#define TIM5_BASE   (APB1PERIPH_BASE + 0x0C00UL)
 
#define TIM6_BASE   (APB1PERIPH_BASE + 0x1000UL)
 
#define TIM7_BASE   (APB1PERIPH_BASE + 0x1400UL)
 
#define TIM12_BASE   (APB1PERIPH_BASE + 0x1800UL)
 
#define TIM13_BASE   (APB1PERIPH_BASE + 0x1C00UL)
 
#define TIM14_BASE   (APB1PERIPH_BASE + 0x2000UL)
 
#define LPTIM1_BASE   (APB1PERIPH_BASE + 0x2400UL)
 
#define RTC_BASE   (APB1PERIPH_BASE + 0x2800UL)
 
#define WWDG_BASE   (APB1PERIPH_BASE + 0x2C00UL)
 
#define IWDG_BASE   (APB1PERIPH_BASE + 0x3000UL)
 
#define SPI2_BASE   (APB1PERIPH_BASE + 0x3800UL)
 
#define SPI3_BASE   (APB1PERIPH_BASE + 0x3C00UL)
 
#define SPDIFRX_BASE   (APB1PERIPH_BASE + 0x4000UL)
 
#define USART2_BASE   (APB1PERIPH_BASE + 0x4400UL)
 
#define USART3_BASE   (APB1PERIPH_BASE + 0x4800UL)
 
#define UART4_BASE   (APB1PERIPH_BASE + 0x4C00UL)
 
#define UART5_BASE   (APB1PERIPH_BASE + 0x5000UL)
 
#define I2C1_BASE   (APB1PERIPH_BASE + 0x5400UL)
 
#define I2C2_BASE   (APB1PERIPH_BASE + 0x5800UL)
 
#define I2C3_BASE   (APB1PERIPH_BASE + 0x5C00UL)
 
#define I2C4_BASE   (APB1PERIPH_BASE + 0x6000UL)
 
#define CAN1_BASE   (APB1PERIPH_BASE + 0x6400UL)
 
#define CAN2_BASE   (APB1PERIPH_BASE + 0x6800UL)
 
#define CEC_BASE   (APB1PERIPH_BASE + 0x6C00UL)
 
#define PWR_BASE   (APB1PERIPH_BASE + 0x7000UL)
 
#define DAC_BASE   (APB1PERIPH_BASE + 0x7400UL)
 
#define UART7_BASE   (APB1PERIPH_BASE + 0x7800UL)
 
#define UART8_BASE   (APB1PERIPH_BASE + 0x7C00UL)
 
#define TIM1_BASE   (APB2PERIPH_BASE + 0x0000UL)
 
#define TIM8_BASE   (APB2PERIPH_BASE + 0x0400UL)
 
#define USART1_BASE   (APB2PERIPH_BASE + 0x1000UL)
 
#define USART6_BASE   (APB2PERIPH_BASE + 0x1400UL)
 
#define ADC1_BASE   (APB2PERIPH_BASE + 0x2000UL)
 
#define ADC2_BASE   (APB2PERIPH_BASE + 0x2100UL)
 
#define ADC3_BASE   (APB2PERIPH_BASE + 0x2200UL)
 
#define ADC_BASE   (APB2PERIPH_BASE + 0x2300UL)
 
#define SDMMC1_BASE   (APB2PERIPH_BASE + 0x2C00UL)
 
#define SPI1_BASE   (APB2PERIPH_BASE + 0x3000UL)
 
#define SPI4_BASE   (APB2PERIPH_BASE + 0x3400UL)
 
#define SYSCFG_BASE   (APB2PERIPH_BASE + 0x3800UL)
 
#define EXTI_BASE   (APB2PERIPH_BASE + 0x3C00UL)
 
#define TIM9_BASE   (APB2PERIPH_BASE + 0x4000UL)
 
#define TIM10_BASE   (APB2PERIPH_BASE + 0x4400UL)
 
#define TIM11_BASE   (APB2PERIPH_BASE + 0x4800UL)
 
#define SPI5_BASE   (APB2PERIPH_BASE + 0x5000UL)
 
#define SPI6_BASE   (APB2PERIPH_BASE + 0x5400UL)
 
#define SAI1_BASE   (APB2PERIPH_BASE + 0x5800UL)
 
#define SAI2_BASE   (APB2PERIPH_BASE + 0x5C00UL)
 
#define SAI1_Block_A_BASE   (SAI1_BASE + 0x004UL)
 
#define SAI1_Block_B_BASE   (SAI1_BASE + 0x024UL)
 
#define SAI2_Block_A_BASE   (SAI2_BASE + 0x004UL)
 
#define SAI2_Block_B_BASE   (SAI2_BASE + 0x024UL)
 
#define LTDC_BASE   (APB2PERIPH_BASE + 0x6800UL)
 
#define LTDC_Layer1_BASE   (LTDC_BASE + 0x0084UL)
 
#define LTDC_Layer2_BASE   (LTDC_BASE + 0x0104UL)
 
#define GPIOA_BASE   (AHB1PERIPH_BASE + 0x0000UL)
 
#define GPIOB_BASE   (AHB1PERIPH_BASE + 0x0400UL)
 
#define GPIOC_BASE   (AHB1PERIPH_BASE + 0x0800UL)
 
#define GPIOD_BASE   (AHB1PERIPH_BASE + 0x0C00UL)
 
#define GPIOE_BASE   (AHB1PERIPH_BASE + 0x1000UL)
 
#define GPIOF_BASE   (AHB1PERIPH_BASE + 0x1400UL)
 
#define GPIOG_BASE   (AHB1PERIPH_BASE + 0x1800UL)
 
#define GPIOH_BASE   (AHB1PERIPH_BASE + 0x1C00UL)
 
#define GPIOI_BASE   (AHB1PERIPH_BASE + 0x2000UL)
 
#define GPIOJ_BASE   (AHB1PERIPH_BASE + 0x2400UL)
 
#define GPIOK_BASE   (AHB1PERIPH_BASE + 0x2800UL)
 
#define CRC_BASE   (AHB1PERIPH_BASE + 0x3000UL)
 
#define RCC_BASE   (AHB1PERIPH_BASE + 0x3800UL)
 
#define FLASH_R_BASE   (AHB1PERIPH_BASE + 0x3C00UL)
 
#define UID_BASE   0x1FF0F420UL
 
#define FLASHSIZE_BASE   0x1FF0F442UL
 
#define PACKAGE_BASE   0x1FF0F7E0UL
 
#define PACKAGESIZE_BASE   PACKAGE_BASE
 
#define DMA1_BASE   (AHB1PERIPH_BASE + 0x6000UL)
 
#define DMA1_Stream0_BASE   (DMA1_BASE + 0x010UL)
 
#define DMA1_Stream1_BASE   (DMA1_BASE + 0x028UL)
 
#define DMA1_Stream2_BASE   (DMA1_BASE + 0x040UL)
 
#define DMA1_Stream3_BASE   (DMA1_BASE + 0x058UL)
 
#define DMA1_Stream4_BASE   (DMA1_BASE + 0x070UL)
 
#define DMA1_Stream5_BASE   (DMA1_BASE + 0x088UL)
 
#define DMA1_Stream6_BASE   (DMA1_BASE + 0x0A0UL)
 
#define DMA1_Stream7_BASE   (DMA1_BASE + 0x0B8UL)
 
#define DMA2_BASE   (AHB1PERIPH_BASE + 0x6400UL)
 
#define DMA2_Stream0_BASE   (DMA2_BASE + 0x010UL)
 
#define DMA2_Stream1_BASE   (DMA2_BASE + 0x028UL)
 
#define DMA2_Stream2_BASE   (DMA2_BASE + 0x040UL)
 
#define DMA2_Stream3_BASE   (DMA2_BASE + 0x058UL)
 
#define DMA2_Stream4_BASE   (DMA2_BASE + 0x070UL)
 
#define DMA2_Stream5_BASE   (DMA2_BASE + 0x088UL)
 
#define DMA2_Stream6_BASE   (DMA2_BASE + 0x0A0UL)
 
#define DMA2_Stream7_BASE   (DMA2_BASE + 0x0B8UL)
 
#define ETH_BASE   (AHB1PERIPH_BASE + 0x8000UL)
 
#define ETH_MAC_BASE   (ETH_BASE)
 
#define ETH_MMC_BASE   (ETH_BASE + 0x0100UL)
 
#define ETH_PTP_BASE   (ETH_BASE + 0x0700UL)
 
#define ETH_DMA_BASE   (ETH_BASE + 0x1000UL)
 
#define DMA2D_BASE   (AHB1PERIPH_BASE + 0xB000UL)
 
#define DCMI_BASE   (AHB2PERIPH_BASE + 0x50000UL)
 
#define RNG_BASE   (AHB2PERIPH_BASE + 0x60800UL)
 
#define FMC_Bank1_R_BASE   (FMC_R_BASE + 0x0000UL)
 
#define FMC_Bank1E_R_BASE   (FMC_R_BASE + 0x0104UL)
 
#define FMC_Bank3_R_BASE   (FMC_R_BASE + 0x0080UL)
 
#define FMC_Bank5_6_R_BASE   (FMC_R_BASE + 0x0140UL)
 
#define DBGMCU_BASE   0xE0042000UL
 
#define USB_OTG_HS_PERIPH_BASE   0x40040000UL
 
#define USB_OTG_FS_PERIPH_BASE   0x50000000UL
 
#define USB_OTG_GLOBAL_BASE   0x0000UL
 
#define USB_OTG_DEVICE_BASE   0x0800UL
 
#define USB_OTG_IN_ENDPOINT_BASE   0x0900UL
 
#define USB_OTG_OUT_ENDPOINT_BASE   0x0B00UL
 
#define USB_OTG_EP_REG_SIZE   0x0020UL
 
#define USB_OTG_HOST_BASE   0x0400UL
 
#define USB_OTG_HOST_PORT_BASE   0x0440UL
 
#define USB_OTG_HOST_CHANNEL_BASE   0x0500UL
 
#define USB_OTG_HOST_CHANNEL_SIZE   0x0020UL
 
#define USB_OTG_PCGCCTL_BASE   0x0E00UL
 
#define USB_OTG_FIFO_BASE   0x1000UL
 
#define USB_OTG_FIFO_SIZE   0x1000UL
 

Detailed Description

Macro Definition Documentation

◆ ADC1_BASE

#define ADC1_BASE   (APB2PERIPH_BASE + 0x2000UL)

#include <stm32f746xx.h>

◆ ADC2_BASE

#define ADC2_BASE   (APB2PERIPH_BASE + 0x2100UL)

#include <stm32f746xx.h>

◆ ADC3_BASE

#define ADC3_BASE   (APB2PERIPH_BASE + 0x2200UL)

#include <stm32f746xx.h>

◆ ADC_BASE

#define ADC_BASE   (APB2PERIPH_BASE + 0x2300UL)

#include <stm32f746xx.h>

◆ AHB1PERIPH_BASE

#define AHB1PERIPH_BASE   (PERIPH_BASE + 0x00020000UL)

#include <stm32f746xx.h>

◆ AHB2PERIPH_BASE

#define AHB2PERIPH_BASE   (PERIPH_BASE + 0x10000000UL)

#include <stm32f746xx.h>

APB1 peripherals

◆ APB1PERIPH_BASE

#define APB1PERIPH_BASE   PERIPH_BASE

#include <stm32f746xx.h>

◆ APB2PERIPH_BASE

#define APB2PERIPH_BASE   (PERIPH_BASE + 0x00010000UL)

#include <stm32f746xx.h>

◆ BKPSRAM_BASE

#define BKPSRAM_BASE   0x40024000UL

#include <stm32f746xx.h>

Base address of : Backup SRAM(4 KB)

◆ CAN1_BASE

#define CAN1_BASE   (APB1PERIPH_BASE + 0x6400UL)

#include <stm32f746xx.h>

◆ CAN2_BASE

#define CAN2_BASE   (APB1PERIPH_BASE + 0x6800UL)

#include <stm32f746xx.h>

◆ CEC_BASE

#define CEC_BASE   (APB1PERIPH_BASE + 0x6C00UL)

#include <stm32f746xx.h>

◆ CRC_BASE

#define CRC_BASE   (AHB1PERIPH_BASE + 0x3000UL)

#include <stm32f746xx.h>

◆ DAC_BASE

#define DAC_BASE   (APB1PERIPH_BASE + 0x7400UL)

#include <stm32f746xx.h>

◆ DBGMCU_BASE

#define DBGMCU_BASE   0xE0042000UL

#include <stm32f746xx.h>

USB registers base address

◆ DCMI_BASE

#define DCMI_BASE   (AHB2PERIPH_BASE + 0x50000UL)

#include <stm32f746xx.h>

◆ DMA1_BASE

#define DMA1_BASE   (AHB1PERIPH_BASE + 0x6000UL)

#include <stm32f746xx.h>

◆ DMA1_Stream0_BASE

#define DMA1_Stream0_BASE   (DMA1_BASE + 0x010UL)

#include <stm32f746xx.h>

◆ DMA1_Stream1_BASE

#define DMA1_Stream1_BASE   (DMA1_BASE + 0x028UL)

#include <stm32f746xx.h>

◆ DMA1_Stream2_BASE

#define DMA1_Stream2_BASE   (DMA1_BASE + 0x040UL)

#include <stm32f746xx.h>

◆ DMA1_Stream3_BASE

#define DMA1_Stream3_BASE   (DMA1_BASE + 0x058UL)

#include <stm32f746xx.h>

◆ DMA1_Stream4_BASE

#define DMA1_Stream4_BASE   (DMA1_BASE + 0x070UL)

#include <stm32f746xx.h>

◆ DMA1_Stream5_BASE

#define DMA1_Stream5_BASE   (DMA1_BASE + 0x088UL)

#include <stm32f746xx.h>

◆ DMA1_Stream6_BASE

#define DMA1_Stream6_BASE   (DMA1_BASE + 0x0A0UL)

#include <stm32f746xx.h>

◆ DMA1_Stream7_BASE

#define DMA1_Stream7_BASE   (DMA1_BASE + 0x0B8UL)

#include <stm32f746xx.h>

◆ DMA2_BASE

#define DMA2_BASE   (AHB1PERIPH_BASE + 0x6400UL)

#include <stm32f746xx.h>

◆ DMA2_Stream0_BASE

#define DMA2_Stream0_BASE   (DMA2_BASE + 0x010UL)

#include <stm32f746xx.h>

◆ DMA2_Stream1_BASE

#define DMA2_Stream1_BASE   (DMA2_BASE + 0x028UL)

#include <stm32f746xx.h>

◆ DMA2_Stream2_BASE

#define DMA2_Stream2_BASE   (DMA2_BASE + 0x040UL)

#include <stm32f746xx.h>

◆ DMA2_Stream3_BASE

#define DMA2_Stream3_BASE   (DMA2_BASE + 0x058UL)

#include <stm32f746xx.h>

◆ DMA2_Stream4_BASE

#define DMA2_Stream4_BASE   (DMA2_BASE + 0x070UL)

#include <stm32f746xx.h>

◆ DMA2_Stream5_BASE

#define DMA2_Stream5_BASE   (DMA2_BASE + 0x088UL)

#include <stm32f746xx.h>

◆ DMA2_Stream6_BASE

#define DMA2_Stream6_BASE   (DMA2_BASE + 0x0A0UL)

#include <stm32f746xx.h>

◆ DMA2_Stream7_BASE

#define DMA2_Stream7_BASE   (DMA2_BASE + 0x0B8UL)

#include <stm32f746xx.h>

◆ DMA2D_BASE

#define DMA2D_BASE   (AHB1PERIPH_BASE + 0xB000UL)

#include <stm32f746xx.h>

AHB2 peripherals

◆ ETH_BASE

#define ETH_BASE   (AHB1PERIPH_BASE + 0x8000UL)

#include <stm32f746xx.h>

◆ ETH_DMA_BASE

#define ETH_DMA_BASE   (ETH_BASE + 0x1000UL)

#include <stm32f746xx.h>

◆ ETH_MAC_BASE

#define ETH_MAC_BASE   (ETH_BASE)

#include <stm32f746xx.h>

◆ ETH_MMC_BASE

#define ETH_MMC_BASE   (ETH_BASE + 0x0100UL)

#include <stm32f746xx.h>

◆ ETH_PTP_BASE

#define ETH_PTP_BASE   (ETH_BASE + 0x0700UL)

#include <stm32f746xx.h>

◆ EXTI_BASE

#define EXTI_BASE   (APB2PERIPH_BASE + 0x3C00UL)

#include <stm32f746xx.h>

◆ FLASH_BASE

#define FLASH_BASE   FLASHAXI_BASE

#include <stm32f746xx.h>

Peripheral memory map

◆ FLASH_END

#define FLASH_END   0x080FFFFFUL

#include <stm32f746xx.h>

FLASH end address

◆ FLASH_OTP_BASE

#define FLASH_OTP_BASE   0x1FF0F000UL

#include <stm32f746xx.h>

Base address of : (up to 1024 Bytes) embedded FLASH OTP Area

◆ FLASH_OTP_END

#define FLASH_OTP_END   0x1FF0F41FUL

#include <stm32f746xx.h>

End address of : (up to 1024 Bytes) embedded FLASH OTP Area

◆ FLASH_R_BASE

#define FLASH_R_BASE   (AHB1PERIPH_BASE + 0x3C00UL)

#include <stm32f746xx.h>

◆ FLASHAXI_BASE

#define FLASHAXI_BASE   0x08000000UL

#include <stm32f746xx.h>

Base address of : (up to 1 MB) embedded FLASH memory accessible over AXI

◆ FLASHITCM_BASE

#define FLASHITCM_BASE   0x00200000UL

#include <stm32f746xx.h>

Base address of : (up to 1 MB) embedded FLASH memory accessible over ITCM

◆ FLASHSIZE_BASE

#define FLASHSIZE_BASE   0x1FF0F442UL

#include <stm32f746xx.h>

FLASH Size register base address

◆ FMC_Bank1_R_BASE

#define FMC_Bank1_R_BASE   (FMC_R_BASE + 0x0000UL)

#include <stm32f746xx.h>

◆ FMC_Bank1E_R_BASE

#define FMC_Bank1E_R_BASE   (FMC_R_BASE + 0x0104UL)

#include <stm32f746xx.h>

◆ FMC_Bank3_R_BASE

#define FMC_Bank3_R_BASE   (FMC_R_BASE + 0x0080UL)

#include <stm32f746xx.h>

◆ FMC_Bank5_6_R_BASE

#define FMC_Bank5_6_R_BASE   (FMC_R_BASE + 0x0140UL)

#include <stm32f746xx.h>

◆ FMC_R_BASE

#define FMC_R_BASE   0xA0000000UL

#include <stm32f746xx.h>

Base address of : FMC Control registers

◆ GPIOA_BASE

#define GPIOA_BASE   (AHB1PERIPH_BASE + 0x0000UL)

#include <stm32f746xx.h>

◆ GPIOB_BASE

#define GPIOB_BASE   (AHB1PERIPH_BASE + 0x0400UL)

#include <stm32f746xx.h>

◆ GPIOC_BASE

#define GPIOC_BASE   (AHB1PERIPH_BASE + 0x0800UL)

#include <stm32f746xx.h>

◆ GPIOD_BASE

#define GPIOD_BASE   (AHB1PERIPH_BASE + 0x0C00UL)

#include <stm32f746xx.h>

◆ GPIOE_BASE

#define GPIOE_BASE   (AHB1PERIPH_BASE + 0x1000UL)

#include <stm32f746xx.h>

◆ GPIOF_BASE

#define GPIOF_BASE   (AHB1PERIPH_BASE + 0x1400UL)

#include <stm32f746xx.h>

◆ GPIOG_BASE

#define GPIOG_BASE   (AHB1PERIPH_BASE + 0x1800UL)

#include <stm32f746xx.h>

◆ GPIOH_BASE

#define GPIOH_BASE   (AHB1PERIPH_BASE + 0x1C00UL)

#include <stm32f746xx.h>

◆ GPIOI_BASE

#define GPIOI_BASE   (AHB1PERIPH_BASE + 0x2000UL)

#include <stm32f746xx.h>

◆ GPIOJ_BASE

#define GPIOJ_BASE   (AHB1PERIPH_BASE + 0x2400UL)

#include <stm32f746xx.h>

◆ GPIOK_BASE

#define GPIOK_BASE   (AHB1PERIPH_BASE + 0x2800UL)

#include <stm32f746xx.h>

◆ I2C1_BASE

#define I2C1_BASE   (APB1PERIPH_BASE + 0x5400UL)

#include <stm32f746xx.h>

◆ I2C2_BASE

#define I2C2_BASE   (APB1PERIPH_BASE + 0x5800UL)

#include <stm32f746xx.h>

◆ I2C3_BASE

#define I2C3_BASE   (APB1PERIPH_BASE + 0x5C00UL)

#include <stm32f746xx.h>

◆ I2C4_BASE

#define I2C4_BASE   (APB1PERIPH_BASE + 0x6000UL)

#include <stm32f746xx.h>

◆ IWDG_BASE

#define IWDG_BASE   (APB1PERIPH_BASE + 0x3000UL)

#include <stm32f746xx.h>

◆ LPTIM1_BASE

#define LPTIM1_BASE   (APB1PERIPH_BASE + 0x2400UL)

#include <stm32f746xx.h>

◆ LTDC_BASE

#define LTDC_BASE   (APB2PERIPH_BASE + 0x6800UL)

#include <stm32f746xx.h>

◆ LTDC_Layer1_BASE

#define LTDC_Layer1_BASE   (LTDC_BASE + 0x0084UL)

#include <stm32f746xx.h>

◆ LTDC_Layer2_BASE

#define LTDC_Layer2_BASE   (LTDC_BASE + 0x0104UL)

#include <stm32f746xx.h>

AHB1 peripherals

◆ PACKAGE_BASE

#define PACKAGE_BASE   0x1FF0F7E0UL

#include <stm32f746xx.h>

Package size register base address

◆ PACKAGESIZE_BASE

#define PACKAGESIZE_BASE   PACKAGE_BASE

#include <stm32f746xx.h>

◆ PERIPH_BASE

#define PERIPH_BASE   0x40000000UL

#include <stm32f746xx.h>

Base address of : AHB/ABP Peripherals

◆ PWR_BASE

#define PWR_BASE   (APB1PERIPH_BASE + 0x7000UL)

#include <stm32f746xx.h>

◆ QSPI_BASE

#define QSPI_BASE   0x90000000UL

#include <stm32f746xx.h>

Base address of : QSPI memories accessible over AXI

◆ QSPI_R_BASE

#define QSPI_R_BASE   0xA0001000UL

#include <stm32f746xx.h>

Base address of : QSPI Control registers

◆ RAMDTCM_BASE

#define RAMDTCM_BASE   0x20000000UL

#include <stm32f746xx.h>

Base address of : 64KB system data RAM accessible over DTCM

◆ RAMITCM_BASE

#define RAMITCM_BASE   0x00000000UL

#include <stm32f746xx.h>

Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM

◆ RCC_BASE

#define RCC_BASE   (AHB1PERIPH_BASE + 0x3800UL)

#include <stm32f746xx.h>

◆ RNG_BASE

#define RNG_BASE   (AHB2PERIPH_BASE + 0x60800UL)

#include <stm32f746xx.h>

FMC Bankx registers base address

◆ RTC_BASE

#define RTC_BASE   (APB1PERIPH_BASE + 0x2800UL)

#include <stm32f746xx.h>

◆ SAI1_BASE

#define SAI1_BASE   (APB2PERIPH_BASE + 0x5800UL)

#include <stm32f746xx.h>

◆ SAI1_Block_A_BASE

#define SAI1_Block_A_BASE   (SAI1_BASE + 0x004UL)

#include <stm32f746xx.h>

◆ SAI1_Block_B_BASE

#define SAI1_Block_B_BASE   (SAI1_BASE + 0x024UL)

#include <stm32f746xx.h>

◆ SAI2_BASE

#define SAI2_BASE   (APB2PERIPH_BASE + 0x5C00UL)

#include <stm32f746xx.h>

◆ SAI2_Block_A_BASE

#define SAI2_Block_A_BASE   (SAI2_BASE + 0x004UL)

#include <stm32f746xx.h>

◆ SAI2_Block_B_BASE

#define SAI2_Block_B_BASE   (SAI2_BASE + 0x024UL)

#include <stm32f746xx.h>

◆ SDMMC1_BASE

#define SDMMC1_BASE   (APB2PERIPH_BASE + 0x2C00UL)

#include <stm32f746xx.h>

◆ SPDIFRX_BASE

#define SPDIFRX_BASE   (APB1PERIPH_BASE + 0x4000UL)

#include <stm32f746xx.h>

◆ SPI1_BASE

#define SPI1_BASE   (APB2PERIPH_BASE + 0x3000UL)

#include <stm32f746xx.h>

◆ SPI2_BASE

#define SPI2_BASE   (APB1PERIPH_BASE + 0x3800UL)

#include <stm32f746xx.h>

◆ SPI3_BASE

#define SPI3_BASE   (APB1PERIPH_BASE + 0x3C00UL)

#include <stm32f746xx.h>

◆ SPI4_BASE

#define SPI4_BASE   (APB2PERIPH_BASE + 0x3400UL)

#include <stm32f746xx.h>

◆ SPI5_BASE

#define SPI5_BASE   (APB2PERIPH_BASE + 0x5000UL)

#include <stm32f746xx.h>

◆ SPI6_BASE

#define SPI6_BASE   (APB2PERIPH_BASE + 0x5400UL)

#include <stm32f746xx.h>

◆ SRAM1_BASE

#define SRAM1_BASE   0x20010000UL

#include <stm32f746xx.h>

Base address of : 240KB RAM1 accessible over AXI/AHB

◆ SRAM2_BASE

#define SRAM2_BASE   0x2004C000UL

#include <stm32f746xx.h>

Base address of : 16KB RAM2 accessible over AXI/AHB

◆ SYSCFG_BASE

#define SYSCFG_BASE   (APB2PERIPH_BASE + 0x3800UL)

#include <stm32f746xx.h>

◆ TIM10_BASE

#define TIM10_BASE   (APB2PERIPH_BASE + 0x4400UL)

#include <stm32f746xx.h>

◆ TIM11_BASE

#define TIM11_BASE   (APB2PERIPH_BASE + 0x4800UL)

#include <stm32f746xx.h>

◆ TIM12_BASE

#define TIM12_BASE   (APB1PERIPH_BASE + 0x1800UL)

#include <stm32f746xx.h>

◆ TIM13_BASE

#define TIM13_BASE   (APB1PERIPH_BASE + 0x1C00UL)

#include <stm32f746xx.h>

◆ TIM14_BASE

#define TIM14_BASE   (APB1PERIPH_BASE + 0x2000UL)

#include <stm32f746xx.h>

◆ TIM1_BASE

#define TIM1_BASE   (APB2PERIPH_BASE + 0x0000UL)

#include <stm32f746xx.h>

◆ TIM2_BASE

#define TIM2_BASE   (APB1PERIPH_BASE + 0x0000UL)

#include <stm32f746xx.h>

◆ TIM3_BASE

#define TIM3_BASE   (APB1PERIPH_BASE + 0x0400UL)

#include <stm32f746xx.h>

◆ TIM4_BASE

#define TIM4_BASE   (APB1PERIPH_BASE + 0x0800UL)

#include <stm32f746xx.h>

◆ TIM5_BASE

#define TIM5_BASE   (APB1PERIPH_BASE + 0x0C00UL)

#include <stm32f746xx.h>

◆ TIM6_BASE

#define TIM6_BASE   (APB1PERIPH_BASE + 0x1000UL)

#include <stm32f746xx.h>

◆ TIM7_BASE

#define TIM7_BASE   (APB1PERIPH_BASE + 0x1400UL)

#include <stm32f746xx.h>

◆ TIM8_BASE

#define TIM8_BASE   (APB2PERIPH_BASE + 0x0400UL)

#include <stm32f746xx.h>

◆ TIM9_BASE

#define TIM9_BASE   (APB2PERIPH_BASE + 0x4000UL)

#include <stm32f746xx.h>

◆ UART4_BASE

#define UART4_BASE   (APB1PERIPH_BASE + 0x4C00UL)

#include <stm32f746xx.h>

◆ UART5_BASE

#define UART5_BASE   (APB1PERIPH_BASE + 0x5000UL)

#include <stm32f746xx.h>

◆ UART7_BASE

#define UART7_BASE   (APB1PERIPH_BASE + 0x7800UL)

#include <stm32f746xx.h>

◆ UART8_BASE

#define UART8_BASE   (APB1PERIPH_BASE + 0x7C00UL)

#include <stm32f746xx.h>

APB2 peripherals

◆ UID_BASE

#define UID_BASE   0x1FF0F420UL

#include <stm32f746xx.h>

Unique device ID register base address

◆ USART1_BASE

#define USART1_BASE   (APB2PERIPH_BASE + 0x1000UL)

#include <stm32f746xx.h>

◆ USART2_BASE

#define USART2_BASE   (APB1PERIPH_BASE + 0x4400UL)

#include <stm32f746xx.h>

◆ USART3_BASE

#define USART3_BASE   (APB1PERIPH_BASE + 0x4800UL)

#include <stm32f746xx.h>

◆ USART6_BASE

#define USART6_BASE   (APB2PERIPH_BASE + 0x1400UL)

#include <stm32f746xx.h>

◆ USB_OTG_DEVICE_BASE

#define USB_OTG_DEVICE_BASE   0x0800UL

#include <stm32f746xx.h>

◆ USB_OTG_EP_REG_SIZE

#define USB_OTG_EP_REG_SIZE   0x0020UL

#include <stm32f746xx.h>

◆ USB_OTG_FIFO_BASE

#define USB_OTG_FIFO_BASE   0x1000UL

#include <stm32f746xx.h>

◆ USB_OTG_FIFO_SIZE

#define USB_OTG_FIFO_SIZE   0x1000UL

#include <stm32f746xx.h>

◆ USB_OTG_FS_PERIPH_BASE

#define USB_OTG_FS_PERIPH_BASE   0x50000000UL

#include <stm32f746xx.h>

◆ USB_OTG_GLOBAL_BASE

#define USB_OTG_GLOBAL_BASE   0x0000UL

#include <stm32f746xx.h>

◆ USB_OTG_HOST_BASE

#define USB_OTG_HOST_BASE   0x0400UL

#include <stm32f746xx.h>

◆ USB_OTG_HOST_CHANNEL_BASE

#define USB_OTG_HOST_CHANNEL_BASE   0x0500UL

#include <stm32f746xx.h>

◆ USB_OTG_HOST_CHANNEL_SIZE

#define USB_OTG_HOST_CHANNEL_SIZE   0x0020UL

#include <stm32f746xx.h>

◆ USB_OTG_HOST_PORT_BASE

#define USB_OTG_HOST_PORT_BASE   0x0440UL

#include <stm32f746xx.h>

◆ USB_OTG_HS_PERIPH_BASE

#define USB_OTG_HS_PERIPH_BASE   0x40040000UL

#include <stm32f746xx.h>

◆ USB_OTG_IN_ENDPOINT_BASE

#define USB_OTG_IN_ENDPOINT_BASE   0x0900UL

#include <stm32f746xx.h>

◆ USB_OTG_OUT_ENDPOINT_BASE

#define USB_OTG_OUT_ENDPOINT_BASE   0x0B00UL

#include <stm32f746xx.h>

◆ USB_OTG_PCGCCTL_BASE

#define USB_OTG_PCGCCTL_BASE   0x0E00UL

#include <stm32f746xx.h>

◆ WWDG_BASE

#define WWDG_BASE   (APB1PERIPH_BASE + 0x2C00UL)

#include <stm32f746xx.h>