add initial Setup
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
commit
bdb5db2009
1955 files changed
+1004711
No files matched your search
@@ -0,0 +1 @@
|
||||
Checks: " -clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling "
|
||||
@@ -0,0 +1,3 @@
|
||||
build
|
||||
Debug
|
||||
Release
|
||||
@@ -0,0 +1,119 @@
|
||||
[CortexM7:PreviousLibFiles]
|
||||
LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_spi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_spi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_spi_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xLine truncated
|
||||
|
||||
[CortexM7:PreviousUsedCubeIDEFiles]
|
||||
SourceFiles=CM7\Core\Src\main.c;CM7\OPENAMP\mbox_hsem.c;CM7\OPENAMP\openamp.c;CM7\OPENAMP\rsc_table.c;CM7\Core\Src\stm32h7xx_it.c;CM7\Core\Src\stm32h7xx_hal_msp.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;;;
|
||||
HeaderPath=Middlewares\Third_Party\OpenAMP\open-amp\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include\metal\compiler\gcc;Middlewares\Third_Party\OpenAMP\virtual_driver;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg;Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;CM7\OPENAMP;CM7\Core\Inc;Middlewares\Third_Party\OpenAMP\open-amp\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include\metal\compiler\gcc;Middlewares\Third_Party\OpenAMP\virtual_driver;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg;Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;
|
||||
CDefines=CORE_CM7;USE_HAL_DRIVER;STM32H755xx;USE_HAL_DRIVER;METAL_INTERNAL;METAL_MAX_DEVICE_REGIONS:2;RPMSG_BUFFER_SIZE:512;VIRTIO_MASTER_ONLY;NO_ATOMIC_64_SUPPORT;USE_PWR_DIRECT_SMPS_SUPPLY;USE_PWR_DIRECT_SMPS_SUPPLY;USE_HAL_DRIVER;USE_HAL_DRIVER;
|
||||
|
||||
[CortexM4:PreviousLibFiles]
|
||||
LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32Line truncated
|
||||
|
||||
[CortexM4:PreviousUsedCubeIDEFiles]
|
||||
SourceFiles=CM4\Core\Src\main.c;CM4\OPENAMP\mbox_hsem.c;CM4\OPENAMP\openamp.c;CM4\OPENAMP\rsc_table.c;CM4\Core\Src\stm32h7xx_it.c;CM4\Core\Src\stm32h7xx_hal_msp.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;;;
|
||||
HeaderPath=Middlewares\Third_Party\OpenAMP\open-amp\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include\metal\compiler\gcc;Middlewares\Third_Party\OpenAMP\virtual_driver;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg;Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;CM4\OPENAMP;CM4\Core\Inc;Middlewares\Third_Party\OpenAMP\open-amp\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include\metal\compiler\gcc;Middlewares\Third_Party\OpenAMP\virtual_driver;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg;Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;
|
||||
CDefines=CORE_CM4;USE_HAL_DRIVER;STM32H755xx;USE_HAL_DRIVER;METAL_INTERNAL;METAL_MAX_DEVICE_REGIONS:2;RPMSG_BUFFER_SIZE:512;VIRTIO_SLAVE_ONLY;NO_ATOMIC_64_SUPPORT;USE_PWR_DIRECT_SMPS_SUPPLY;USE_PWR_DIRECT_SMPS_SUPPLY;USE_HAL_DRIVER;USE_HAL_DRIVER;
|
||||
|
||||
[PreviousLibFiles]
|
||||
LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_spi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_spi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_spi_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xLine truncated
|
||||
|
||||
[PreviousUsedCubeIDEFiles]
|
||||
SourceFiles=CM4\Core\Src\main.c;CM7\Core\Src\main.c;CM7\OPENAMP\mbox_hsem.c;CM7\OPENAMP\openamp.c;CM7\OPENAMP\rsc_table.c;CM7\Core\Src\stm32h7xx_it.c;CM7\Core\Src\stm32h7xx_hal_msp.c;CM4\OPENAMP\mbox_hsem.c;CM4\OPENAMP\openamp.c;CM4\OPENAMP\rsc_table.c;CM4\Core\Src\stm32h7xx_it.c;CM4\Core\Src\stm32h7xx_hal_msp.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\virtio\virtqueue.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\cortexm\sys.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx_dualcore_boot_cm4_cm7.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\CMakeLists.txt;Common\Src\system_stm32h7xx_dualcore_boot_cm4_cm7.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_spi_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\log.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\condition.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_device.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_init.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_io.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\generic_shmem.c;Middlewares\Third_Party\OpenAMP\libmetal\lib\system\generic\time.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\remoteproc\remoteproc_virtio.c;Middlewares\Third_Party\OpenAMP\open-amp\lib\rpmsg\rpmsg.c;Middlewares\Third_Party\OpenAMP\oLine truncated
|
||||
HeaderPath=Middlewares\Third_Party\OpenAMP\open-amp\lib\include;Middlewares\Third_Party\OpenAMP\libmetal\lib\include;Middlewares\Third_Party\OpenAMP\virtual_driver;Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;CM7\OPENAMP;CM7\Core\Inc;CM4\OPENAMP;CM4\Core\Inc;
|
||||
CDefines=CORE_CM4;CORE_CM7;CORE_CM7;USE_HAL_DRIVER;STM32H755xx;USE_HAL_DRIVER;METAL_INTERNAL;METAL_MAX_DEVICE_REGIONS:2;RPMSG_BUFFER_SIZE:512;VIRTIO_MASTER_ONLY;NO_ATOMIC_64_SUPPORT;USE_PWR_DIRECT_SMPS_SUPPLY;USE_PWR_DIRECT_SMPS_SUPPLY;USE_HAL_DRIVER;USE_HAL_DRIVER;CORE_CM4;CORE_CM4;USE_HAL_DRIVER;STM32H755xx;USE_HAL_DRIVER;METAL_INTERNAL;METAL_MAX_DEVICE_REGIONS:2;RPMSG_BUFFER_SIZE:512;VIRTIO_SLAVE_ONLY;NO_ATOMIC_64_SUPPORT;USE_PWR_DIRECT_SMPS_SUPPLY;USE_PWR_DIRECT_SMPS_SUPPLY;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER;
|
||||
|
||||
[CortexM7:PreviousGenFiles]
|
||||
AdvancedFolderStructure=true
|
||||
HeaderFileListSize=7
|
||||
HeaderFiles#0=..\CM7\OPENAMP\openamp_conf.h
|
||||
HeaderFiles#1=..\CM7\OPENAMP\mbox_hsem.h
|
||||
HeaderFiles#2=..\CM7\OPENAMP\openamp.h
|
||||
HeaderFiles#3=..\CM7\OPENAMP\rsc_table.h
|
||||
HeaderFiles#4=..\CM7\Core\Inc\stm32h7xx_it.h
|
||||
HeaderFiles#5=..\CM7\Core\Inc\stm32h7xx_hal_conf.h
|
||||
HeaderFiles#6=..\CM7\Core\Inc\main.h
|
||||
HeaderFolderListSize=2
|
||||
HeaderPath#0=..\CM7\OPENAMP
|
||||
HeaderPath#1=..\CM7\Core\Inc
|
||||
HeaderFiles=;
|
||||
SourceFileListSize=6
|
||||
SourceFiles#0=..\CM7\OPENAMP\mbox_hsem.c
|
||||
SourceFiles#1=..\CM7\OPENAMP\openamp.c
|
||||
SourceFiles#2=..\CM7\OPENAMP\rsc_table.c
|
||||
SourceFiles#3=..\CM7\Core\Src\stm32h7xx_it.c
|
||||
SourceFiles#4=..\CM7\Core\Src\stm32h7xx_hal_msp.c
|
||||
SourceFiles#5=..\CM7\Core\Src\main.c
|
||||
SourceFolderListSize=2
|
||||
SourcePath#0=..\CM7\OPENAMP
|
||||
SourcePath#1=..\CM7\Core\Src
|
||||
SourceFiles=;
|
||||
|
||||
[CortexM4:PreviousGenFiles]
|
||||
AdvancedFolderStructure=true
|
||||
HeaderFileListSize=7
|
||||
HeaderFiles#0=..\CM4\OPENAMP\openamp_conf.h
|
||||
HeaderFiles#1=..\CM4\OPENAMP\mbox_hsem.h
|
||||
HeaderFiles#2=..\CM4\OPENAMP\openamp.h
|
||||
HeaderFiles#3=..\CM4\OPENAMP\rsc_table.h
|
||||
HeaderFiles#4=..\CM4\Core\Inc\stm32h7xx_it.h
|
||||
HeaderFiles#5=..\CM4\Core\Inc\stm32h7xx_hal_conf.h
|
||||
HeaderFiles#6=..\CM4\Core\Inc\main.h
|
||||
HeaderFolderListSize=2
|
||||
HeaderPath#0=..\CM4\OPENAMP
|
||||
HeaderPath#1=..\CM4\Core\Inc
|
||||
HeaderFiles=;
|
||||
SourceFileListSize=6
|
||||
SourceFiles#0=..\CM4\OPENAMP\mbox_hsem.c
|
||||
SourceFiles#1=..\CM4\OPENAMP\openamp.c
|
||||
SourceFiles#2=..\CM4\OPENAMP\rsc_table.c
|
||||
SourceFiles#3=..\CM4\Core\Src\stm32h7xx_it.c
|
||||
SourceFiles#4=..\CM4\Core\Src\stm32h7xx_hal_msp.c
|
||||
SourceFiles#5=..\CM4\Core\Src\main.c
|
||||
SourceFolderListSize=2
|
||||
SourcePath#0=..\CM4\OPENAMP
|
||||
SourcePath#1=..\CM4\Core\Src
|
||||
SourceFiles=;
|
||||
|
||||
[PreviousGenFiles]
|
||||
AdvancedFolderStructure=true
|
||||
HeaderFileListSize=14
|
||||
HeaderFiles#0=..\CM7\OPENAMP\openamp_conf.h
|
||||
HeaderFiles#1=..\CM7\OPENAMP\mbox_hsem.h
|
||||
HeaderFiles#2=..\CM7\OPENAMP\openamp.h
|
||||
HeaderFiles#3=..\CM7\OPENAMP\rsc_table.h
|
||||
HeaderFiles#4=..\CM7\Core\Inc\stm32h7xx_it.h
|
||||
HeaderFiles#5=..\CM7\Core\Inc\stm32h7xx_hal_conf.h
|
||||
HeaderFiles#6=..\CM7\Core\Inc\main.h
|
||||
HeaderFiles#7=..\CM4\OPENAMP\openamp_conf.h
|
||||
HeaderFiles#8=..\CM4\OPENAMP\mbox_hsem.h
|
||||
HeaderFiles#9=..\CM4\OPENAMP\openamp.h
|
||||
HeaderFiles#10=..\CM4\OPENAMP\rsc_table.h
|
||||
HeaderFiles#11=..\CM4\Core\Inc\stm32h7xx_it.h
|
||||
HeaderFiles#12=..\CM4\Core\Inc\stm32h7xx_hal_conf.h
|
||||
HeaderFiles#13=..\CM4\Core\Inc\main.h
|
||||
HeaderFolderListSize=4
|
||||
HeaderPath#0=..\CM7\OPENAMP
|
||||
HeaderPath#1=..\CM7\Core\Inc
|
||||
HeaderPath#2=..\CM4\OPENAMP
|
||||
HeaderPath#3=..\CM4\Core\Inc
|
||||
HeaderFiles=;
|
||||
SourceFileListSize=12
|
||||
SourceFiles#0=..\CM7\OPENAMP\mbox_hsem.c
|
||||
SourceFiles#1=..\CM7\OPENAMP\openamp.c
|
||||
SourceFiles#2=..\CM7\OPENAMP\rsc_table.c
|
||||
SourceFiles#3=..\CM7\Core\Src\stm32h7xx_it.c
|
||||
SourceFiles#4=..\CM7\Core\Src\stm32h7xx_hal_msp.c
|
||||
SourceFiles#5=..\CM7\Core\Src\main.c
|
||||
SourceFiles#6=..\CM4\OPENAMP\mbox_hsem.c
|
||||
SourceFiles#7=..\CM4\OPENAMP\openamp.c
|
||||
SourceFiles#8=..\CM4\OPENAMP\rsc_table.c
|
||||
SourceFiles#9=..\CM4\Core\Src\stm32h7xx_it.c
|
||||
SourceFiles#10=..\CM4\Core\Src\stm32h7xx_hal_msp.c
|
||||
SourceFiles#11=..\CM4\Core\Src\main.c
|
||||
SourceFolderListSize=4
|
||||
SourcePath#0=..\CM7\OPENAMP
|
||||
SourcePath#1=..\CM7\Core\Src
|
||||
SourcePath#2=..\CM4\OPENAMP
|
||||
SourcePath#3=..\CM4\Core\Src
|
||||
SourceFiles=;
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<projectDescription>
|
||||
<name>stepper_h7</name>
|
||||
<comment></comment>
|
||||
<projects>
|
||||
</projects>
|
||||
<buildSpec>
|
||||
</buildSpec>
|
||||
<natures>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUMultiCpuProjectNature</nature>
|
||||
</natures>
|
||||
</projectDescription>
|
||||
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
sfrviewstate={"fFavorites"\:{"fLists"\:{}},"fProperties"\:{"fNodeProperties"\:{}}}
|
||||
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
encoding/<project>=UTF-8
|
||||
+40
@@ -0,0 +1,40 @@
|
||||
{
|
||||
"configurations": [
|
||||
{
|
||||
"name": "STM32H755xx",
|
||||
"includePath": [
|
||||
"${workspaceFolder}/CM7/**",
|
||||
"${workspaceFolder}/Drivers/**",
|
||||
"${workspaceFolder}/Middlewares/**",
|
||||
"${workspaceFolder}/../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include",
|
||||
"${workspaceFolder}/../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1",
|
||||
"${workspaceFolder}/../libs/LibRTOSConsole/inc",
|
||||
"${workspaceFolder}/../libs/LibSpindle/inc",
|
||||
"${workspaceFolder}/../libs/LibL6474/inc"
|
||||
],
|
||||
"defines": [
|
||||
"STM32H755xx",
|
||||
"STM32H7xx",
|
||||
"CORE_CM7",
|
||||
"DEBUG",
|
||||
"VIRTIO_MASTER_ONLY",
|
||||
"STM32H755xx",
|
||||
"STM32H7xx",
|
||||
"METAL_INTERNAL",
|
||||
"METAL_MAX_DEVICE_REGIONS=2",
|
||||
"NO_ATOMIC_64_SUPPORT",
|
||||
"RPMSG_BUFFER_SIZE=512",
|
||||
"USE_HAL_DRIVER",
|
||||
"USE_FLASH_ECC=0",
|
||||
"USE_MULTI_CORE_SHARED_CODE=0",
|
||||
"USE_PWR_DIRECT_SMPS_SUPPLY",
|
||||
"STM32H7"
|
||||
],
|
||||
"compilerPath": "arm-none-eabi-gcc",
|
||||
"cStandard": "c17",
|
||||
"cppStandard": "gnu++17",
|
||||
"intelliSenseMode": "gcc-arm"
|
||||
}
|
||||
],
|
||||
"version": 4
|
||||
}
|
||||
Vendored
+159
@@ -0,0 +1,159 @@
|
||||
{
|
||||
// Use IntelliSense to learn about possible attributes.
|
||||
// Hover to view descriptions of existing attributes.
|
||||
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
|
||||
"version": "0.2.0",
|
||||
"configurations": [
|
||||
{
|
||||
"preLaunchTask": "Build Stepper All",
|
||||
"cwd": "${workspaceFolder}",
|
||||
"toolchainPrefix": "arm-none-eabi",
|
||||
"serverpath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"stm32cubeprogrammer": "${env:STM32CLT_PATH}/STM32CubeProgrammer/bin",
|
||||
"stlinkPath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"armToolchainPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin",
|
||||
"gdbPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin/arm-none-eabi-gdb",
|
||||
"executable": "${workspaceFolder}/CM7/build/Stepper-H7-CM7.elf",
|
||||
"name": "Debug CM7 ST-Link V3",
|
||||
"request": "launch",
|
||||
"loadFiles": [
|
||||
"${workspaceFolder}/CM7/build/Stepper-H7-CM7.elf",
|
||||
"${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf"
|
||||
],
|
||||
"servertype": "stlink",
|
||||
"device": "STM32H755ZI",
|
||||
"interface": "swd",
|
||||
"type": "cortex-debug",
|
||||
"liveWatch": {
|
||||
"enabled": true,
|
||||
"samplesPerSecond": 4
|
||||
},
|
||||
"runToEntryPoint": "main",
|
||||
"showDevDebugOutput": "raw",
|
||||
//"rtos": "FreeRTOS",
|
||||
"v1": false,
|
||||
"breakAfterReset": false,
|
||||
"svdFile": "${workspaceFolder}/CM7/STM32H755_CM7.svd",
|
||||
"serverArgs": [
|
||||
"-l", "1",
|
||||
"-m", "0",
|
||||
"-k",
|
||||
"-t","-s"
|
||||
],
|
||||
},
|
||||
{
|
||||
"preLaunchTask": "Build Stepper All",
|
||||
"cwd": "${workspaceFolder}",
|
||||
"toolchainPrefix": "arm-none-eabi",
|
||||
"serverpath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"stm32cubeprogrammer": "${env:STM32CLT_PATH}/STM32CubeProgrammer/bin",
|
||||
"stlinkPath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"armToolchainPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin",
|
||||
"gdbPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin/arm-none-eabi-gdb",
|
||||
"executable": "${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf",
|
||||
"name": "Debug CM4 ST-Link V3",
|
||||
"request": "launch",
|
||||
"loadFiles": [
|
||||
"${workspaceFolder}/CM7/build/Stepper-H7-CM7.elf",
|
||||
"${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf"
|
||||
],
|
||||
"servertype": "stlink",
|
||||
"device": "STM32H755ZI",
|
||||
"interface": "swd",
|
||||
"type": "cortex-debug",
|
||||
"liveWatch": {
|
||||
"enabled": true,
|
||||
"samplesPerSecond": 4
|
||||
},
|
||||
"runToEntryPoint": "main",
|
||||
"showDevDebugOutput": "none",
|
||||
//"rtos": "FreeRTOS",
|
||||
"v1": false,
|
||||
"breakAfterReset": false,
|
||||
"svdFile": "${workspaceFolder}/CM7/STM32H755_CM7.svd",
|
||||
"serverArgs": [
|
||||
"-l", "1",
|
||||
"-m", "3",
|
||||
"-k",
|
||||
"-t","-s"
|
||||
],
|
||||
},
|
||||
{
|
||||
/* In this launch config, the CM4 debug is started,
|
||||
then we wait 10s for the M0 to boot. After than,
|
||||
a launch config to attach to the CM0PLUS is started.
|
||||
*/
|
||||
"name": "Debug CM7+CM4 - ST-Link V3",
|
||||
"preLaunchTask": "Build Stepper All",
|
||||
"cwd": "${workspaceFolder}",
|
||||
"toolchainPrefix": "arm-none-eabi",
|
||||
"serverpath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"stm32cubeprogrammer": "${env:STM32CLT_PATH}/STM32CubeProgrammer/bin",
|
||||
"stlinkPath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"armToolchainPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin",
|
||||
"gdbPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin/arm-none-eabi-gdb",
|
||||
"type": "cortex-debug",
|
||||
"executable": "${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf",
|
||||
"loadFiles": [
|
||||
"${workspaceFolder}/CM7/build/Stepper-H7-CM7.elf",
|
||||
"${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf"
|
||||
],
|
||||
"request": "launch",
|
||||
"servertype": "stlink",
|
||||
"device": "STM32H755ZI",
|
||||
"interface": "swd",
|
||||
"serialNumber": "",
|
||||
// "runToEntryPoint": "main", // No run to main to let the CM7 reach the start point of the CM4
|
||||
"svdFile": "${workspaceFolder}/CM4/STM32H755_CM4.svd",
|
||||
"v1": false,
|
||||
"showDevDebugOutput": "none",
|
||||
//"rtos": "FreeRTOS",
|
||||
"serverArgs": [
|
||||
"-l", "1",
|
||||
"-m", "0",
|
||||
"-k",
|
||||
"-t","-s"
|
||||
],
|
||||
|
||||
"chainedConfigurations": {
|
||||
"enabled": true,
|
||||
"waitOnEvent": "postInit",
|
||||
"detached": true,
|
||||
"delayMs":5000, // Wait 5s, could be optimized
|
||||
"lifecycleManagedByParent": true,
|
||||
"launches": [
|
||||
{
|
||||
"name": "Attach CM4 - ST-Link V3",
|
||||
"folder": "${workspaceFolder}"
|
||||
}
|
||||
]
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "Attach CM4 - ST-Link V3",
|
||||
"cwd": "${workspaceFolder}",
|
||||
"toolchainPrefix": "arm-none-eabi",
|
||||
"serverpath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"stm32cubeprogrammer": "${env:STM32CLT_PATH}/STM32CubeProgrammer/bin",
|
||||
"stlinkPath": "${env:STM32CLT_PATH}/STLink-gdb-server/bin/ST-LINK_gdbserver",
|
||||
"armToolchainPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin",
|
||||
"gdbPath": "${env:STM32CLT_PATH}/GNU-tools-for-STM32/bin/arm-none-eabi-gdb",
|
||||
"type": "cortex-debug",
|
||||
"executable": "${workspaceFolder}/CM4/build/Stepper-H7-CM4.elf",
|
||||
"request": "attach",
|
||||
"servertype": "stlink",
|
||||
"device": "STM32H755ZI",
|
||||
"interface": "swd",
|
||||
"serialNumber": "",
|
||||
"svdFile": "${workspaceFolder}/CM4/STM32H755_CM4.svd",
|
||||
"v1": false,
|
||||
"showDevDebugOutput": "none",
|
||||
//"rtos": "FreeRTOS",
|
||||
"serverArgs": [
|
||||
"-l", "1",
|
||||
"-m", "3",
|
||||
"-t", "-s"
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
Vendored
+67
@@ -0,0 +1,67 @@
|
||||
{
|
||||
// See https://go.microsoft.com/fwlink/?LinkId=733558
|
||||
// for the documentation about the tasks.json format
|
||||
"version": "2.0.0",
|
||||
"tasks": [
|
||||
{
|
||||
"label": "Build Stepper CM7",
|
||||
"type": "shell",
|
||||
"command": "make cm7 -j",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "Clean Stepper CM7",
|
||||
"type": "shell",
|
||||
"command": "make clean_cm7",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "Build Stepper CM4",
|
||||
"type": "shell",
|
||||
"command": "make cm4 -j",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "Clean Stepper CM4",
|
||||
"type": "shell",
|
||||
"command": "make clean_cm4",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "Build Stepper All",
|
||||
"type": "shell",
|
||||
"command": "make all -j",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
},
|
||||
{
|
||||
"label": "Clean Stepper All",
|
||||
"type": "shell",
|
||||
"command": "make clean",
|
||||
"group": "build",
|
||||
"presentation": {
|
||||
"reveal": "always",
|
||||
"panel": "shared"
|
||||
}
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<storageModule moduleId="org.eclipse.cdt.core.settings">
|
||||
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265" moduleId="org.eclipse.cdt.core.settings" name="Debug">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
|
||||
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265." name="/" resourcePath="">
|
||||
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.723556103" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.806559042" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32H755ZITx" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.757282483" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="1" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.783921086" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1332546270" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.840710082" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1708951107" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1794047040" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32H755ZITx || 1 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../OPENAMP | ../Core/Inc | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg | ../../Drivers/STM32H7xx_HAL_Driver/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy | ../../Drivers/CMSIS/Device/ST/STM32H7xx/Include | ../../Drivers/CMSIS/Include | ../../Middlewares/Third_Party/OpenAMP/virtual_driver || || || CORE_CM4 | USE_HAL_DRIVER | STM32H755xx | METAL_INTERNAL | METAL_MAX_DEVICE_REGIONS=2 | RPMSG_BUFFER_SIZE=512 | VIRTIO_SLAVE_ONLY | NO_ATOMIC_64_SUPPORT | USE_PWR_DIRECT_SMPS_SUPPLY || || Core/Src | Drivers | OPENAMP | Core/Startup | Middlewares | Common || || || ${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || || ::" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.748931697" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="200" valueType="string"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.488721960" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||
<builder buildPath="${workspace_loc:/stepper_h7_CM4}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1318599447" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1458329813" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1536391040" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.109707380" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1581271830" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/portable/Compiler/GCC"/>
|
||||
<listOptionValue builtIn="false" value=""../NetworkInterface\include""/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/include"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1890037206" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1148966675" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1078836956" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.2111794925" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1628256590" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="CORE_CM4"/>
|
||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
||||
<listOptionValue builtIn="false" value="STM32H755xx"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="VIRTIO_SLAVE_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
<listOptionValue builtIn="false" value="USE_PWR_DIRECT_SMPS_SUPPLY"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.850611653" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Device/ST/STM32H7xx/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM4F"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Plus-TCP/source/portable/Compiler/GCC"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Plus-TCP/source/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/virtual_driver"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.526395528" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.902743076" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.894383759" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.710612510" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1026008744" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.322088974" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld}" valueType="string"/>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.1940166339" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1440088724" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.2079605619" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.863005891" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.2106300160" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.6151998" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.470747306" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.254543041" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.235194216" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.936269605" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/>
|
||||
<entry excluding="Src/sysmem.c|Src/syscalls.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
|
||||
<entry excluding="Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/STM32/Drivers|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/STM32/Legacy|Third_Party/FreeRTOS-Plus-TCP/source/portable/BufferManagement/BufferAllocation_2.c|Third_Party/FreeRTOS-Plus-TCP/source/portable/Compiler/MSVC|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/WinPCap|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/loopback|Third_Party/FreeRTOS-Plus-TCP/tools|Third_Party/FreeRTOS-Plus-TCP/test|Third_Party/FreeRTOS-Plus-TCP/docs|Third_Party/FreeRTOS-Kernel/portable/GCC/ARM_CM7|Third_Party/FreeRTOS-Kernel/portable/MemMang|Third_Party/FreeRTOS-Kernel/portable/MSVC-MingW" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="OPENAMP"/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640" moduleId="org.eclipse.cdt.core.settings" name="Release">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
|
||||
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640." name="/" resourcePath="">
|
||||
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.970102815" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1350597056" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32H755ZITx" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.508914889" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="1" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1831010670" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1349588948" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1998271548" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1568716835" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.2069485309" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32H755ZITx || 1 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../OPENAMP | ../Core/Inc | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg | ../../Drivers/STM32H7xx_HAL_Driver/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy | ../../Drivers/CMSIS/Device/ST/STM32H7xx/Include | ../../Drivers/CMSIS/Include | ../../Middlewares/Third_Party/OpenAMP/virtual_driver || || || CORE_CM4 | USE_HAL_DRIVER | STM32H755xx | METAL_INTERNAL | METAL_MAX_DEVICE_REGIONS=2 | RPMSG_BUFFER_SIZE=512 | VIRTIO_SLAVE_ONLY | NO_ATOMIC_64_SUPPORT | USE_PWR_DIRECT_SMPS_SUPPLY || || Core/Src | Drivers | OPENAMP | Core/Startup | Middlewares | Common || || || ${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || || ::" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1465973578" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="200" valueType="string"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.663665576" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||
<builder buildPath="${workspace_loc:/stepper_h7_CM4}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1864401437" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.769790340" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.228217637" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1334690220" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/portable/Compiler/GCC"/>
|
||||
<listOptionValue builtIn="false" value=""../NetworkInterface\include""/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/include"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.1223470769" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1810569406" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1517242463" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.258761432" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.587858670" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.509613710" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="CORE_CM4"/>
|
||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
||||
<listOptionValue builtIn="false" value="STM32H755xx"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
<listOptionValue builtIn="false" value="VIRTIO_SLAVE_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
<listOptionValue builtIn="false" value="USE_PWR_DIRECT_SMPS_SUPPLY"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.1408977795" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Device/ST/STM32H7xx/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/portable/Compiler/GCC"/>
|
||||
<listOptionValue builtIn="false" value=""../NetworkInterface\include""/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Plus-TCP/source/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/virtual_driver"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1001828055" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1038060313" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.70706873" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1045958448" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.16464019" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1286652207" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld}" valueType="string"/>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.206618860" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1944024897" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.2021125216" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1559801920" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1530735764" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.146788817" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1805148666" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1226183744" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.396827581" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.512407159" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/>
|
||||
<entry excluding="Src/sysmem.c|Src/syscalls.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
|
||||
<entry excluding="Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/STM32/Drivers|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/STM32/Legacy|Third_Party/FreeRTOS-Plus-TCP/source/portable/BufferManagement/BufferAllocation_2.c|Third_Party/FreeRTOS-Plus-TCP/source/portable/Compiler/MSVC|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/WinPCap|Third_Party/FreeRTOS-Plus-TCP/source/portable/NetworkInterface/loopback|Third_Party/FreeRTOS-Plus-TCP/tools|Third_Party/FreeRTOS-Plus-TCP/test|Third_Party/FreeRTOS-Plus-TCP/docs|Third_Party/FreeRTOS-Kernel/portable/GCC/ARM_CM7|Third_Party/FreeRTOS-Kernel/portable/MemMang|Third_Party/FreeRTOS-Kernel/portable/MSVC-MingW" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="OPENAMP"/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<project id="stepper_h7_CM4.null.1718649379" name="stepper_h7_CM4"/>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
|
||||
<storageModule moduleId="scannerConfiguration">
|
||||
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1517242463;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1001828055">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1148966675;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.526395528">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
</storageModule>
|
||||
<storageModule moduleId="refreshScope"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
</cproject>
|
||||
@@ -0,0 +1,3 @@
|
||||
build
|
||||
Debug
|
||||
Release
|
||||
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
sfrviewstate={"fFavorites"\:{"fLists"\:{}},"fProperties"\:{"fNodeProperties"\:{}}}
|
||||
@@ -0,0 +1,25 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<project>
|
||||
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.268958265" name="Debug">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider-reference id="org.eclipse.cdt.ui.UserLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1445831975800947277" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.165877640" name="Release">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider-reference id="org.eclipse.cdt.ui.UserLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1445831975800947277" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
</project>
|
||||
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
encoding/<project>=UTF-8
|
||||
@@ -0,0 +1,5 @@
|
||||
\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000=
|
||||
2F62501ED4689FB349E356AB974DBE57=EF232BB7A78569BB4DEEA5A8CE9841A0
|
||||
8DF89ED150041C4CBC7CB9A9CAA90856=EF232BB7A78569BB4DEEA5A8CE9841A0
|
||||
DC22A860405A8BF2F2C095E5B6529F12=6EE9111B96141CC38C9D3E133C3B0FF1
|
||||
eclipse.preferences.version=1
|
||||
@@ -0,0 +1,141 @@
|
||||
#ifndef FREERTOS_CONFIG_H
|
||||
#define FREERTOS_CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------
|
||||
* Application specific definitions.
|
||||
*
|
||||
* These definitions should be adjusted for your particular hardware and
|
||||
* application requirements.
|
||||
*
|
||||
* These parameters and more are described within the 'configuration' section of the
|
||||
* FreeRTOS API documentation available on the FreeRTOS.org web site.
|
||||
*
|
||||
* See http://www.freertos.org/a00110.html
|
||||
*----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* Section where include file can be added */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Ensure definitions are only used by the compiler, and not by the assembler. */
|
||||
#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
|
||||
#include <stdint.h>
|
||||
extern uint32_t SystemCoreClock;
|
||||
/* USER CODE BEGIN 0 */
|
||||
extern void configureTimerForRunTimeStats(void);
|
||||
extern unsigned long getRunTimeCounterValue(void);
|
||||
/* USER CODE END 0 */
|
||||
#endif
|
||||
#define configENABLE_FPU 1
|
||||
#define configENABLE_MPU 0
|
||||
|
||||
#define configUSE_PREEMPTION 1
|
||||
#define configSUPPORT_STATIC_ALLOCATION 0
|
||||
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ ( SystemCoreClock )
|
||||
#define configTICK_RATE_HZ ((TickType_t)1000)
|
||||
#define configMAX_PRIORITIES ( 7 )
|
||||
#define configMINIMAL_STACK_SIZE ((uint16_t)1024)
|
||||
#define configTOTAL_HEAP_SIZE ((size_t)0x20000)
|
||||
#define configMAX_TASK_NAME_LEN ( 16 )
|
||||
#define configQUEUE_REGISTRY_SIZE ( 32 )
|
||||
#define configGENERATE_RUN_TIME_STATS 1
|
||||
#define configUSE_TRACE_FACILITY 1
|
||||
#define configUSE_STATS_FORMATTING_FUNCTIONS 1
|
||||
#define configUSE_16_BIT_TICKS 0
|
||||
#define configUSE_MUTEXES 1
|
||||
#define configUSE_TIMERS 1
|
||||
#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
|
||||
#define configTIMER_QUEUE_LENGTH 8
|
||||
#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 4 )
|
||||
#define configCHECK_FOR_STACK_OVERFLOW 2
|
||||
#define configUSE_RECURSIVE_MUTEXES 1
|
||||
#define configUSE_MALLOC_FAILED_HOOK 1
|
||||
#define configUSE_COUNTING_SEMAPHORES 1
|
||||
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
|
||||
/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
|
||||
/* Defaults to size_t for backward compatibility, but can be changed
|
||||
if lengths will always be less than the number of bytes in a size_t. */
|
||||
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
|
||||
/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
|
||||
|
||||
/* Co-routine definitions. */
|
||||
#define configUSE_CO_ROUTINES 0
|
||||
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
|
||||
|
||||
/* The following flag must be enabled only when using newlib */
|
||||
#define configUSE_NEWLIB_REENTRANT 1
|
||||
#define configCHECK_HANDLER_INSTALLATION 1
|
||||
/* Set the following definitions to 1 to include the API function, or zero
|
||||
to exclude the API function. */
|
||||
#define INCLUDE_vTaskPrioritySet 1
|
||||
#define INCLUDE_uxTaskPriorityGet 1
|
||||
#define INCLUDE_vTaskDelete 1
|
||||
#define INCLUDE_vTaskCleanUpResources 0
|
||||
#define INCLUDE_vTaskSuspend 1
|
||||
#define INCLUDE_vTaskDelayUntil 1
|
||||
#define INCLUDE_vTaskDelay 1
|
||||
#define INCLUDE_xTaskGetSchedulerState 1
|
||||
|
||||
/* Cortex-M specific definitions. */
|
||||
#ifdef __NVIC_PRIO_BITS
|
||||
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||
#else
|
||||
#define configPRIO_BITS 4
|
||||
#endif
|
||||
|
||||
/* The lowest interrupt priority that can be used in a call to a "set priority"
|
||||
function. */
|
||||
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
|
||||
|
||||
/* The highest interrupt priority that can be used by any interrupt service
|
||||
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
|
||||
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
|
||||
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
|
||||
|
||||
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
|
||||
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||
header file. */
|
||||
/* USER CODE BEGIN 1 */
|
||||
void vAssertCalled( const char * const pcFileName, unsigned long ulLine );
|
||||
#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); vAssertCalled( __FILE__, __LINE__);}
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
|
||||
standard names. */
|
||||
#define vPortSVCHandler SVC_Handler
|
||||
#define xPortPendSVHandler PendSV_Handler
|
||||
|
||||
/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
|
||||
to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
|
||||
|
||||
//#define xPortSysTickHandler SysTick_Handler
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
/* Definitions needed when configGENERATE_RUN_TIME_STATS is on */
|
||||
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() //SetupRunTimeStatsTimer
|
||||
#define portGET_RUN_TIME_COUNTER_VALUE() (xTaskGetTickCount())//GetHighFrequencyTickValue
|
||||
|
||||
#define configISR_STACK_SIZE_WORDS 4096
|
||||
#define configUSE_NEWLIB_REENTRANT 1
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* USER CODE BEGIN Defines */
|
||||
#define configAPPLICATION_ALLOCATED_HEAP 1
|
||||
#define configRECORD_STACK_HIGH_ADDRESS 1 /* 1: record stack high address for the debugger, 0: do not record stack high address */
|
||||
/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
|
||||
|
||||
|
||||
/* USER CODE END Defines */
|
||||
|
||||
#endif /* FREERTOS_CONFIG_H */
|
||||
@@ -0,0 +1,333 @@
|
||||
/*
|
||||
* FreeRTOS+TCP
|
||||
* Copyright (C) 2022 Amazon.com, Inc. or its affiliates. All Rights Reserved.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy of
|
||||
* this software and associated documentation files (the "Software"), to deal in
|
||||
* the Software without restriction, including without limitation the rights to
|
||||
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
|
||||
* the Software, and to permit persons to whom the Software is furnished to do so,
|
||||
* subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
|
||||
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
||||
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||||
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
* http://aws.amazon.com/freertos
|
||||
* http://www.FreeRTOS.org
|
||||
*/
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
*
|
||||
* See the following URL for configuration information.
|
||||
* http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_IP_Configuration.html
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
#ifndef FREERTOS_IP_CONFIG_H
|
||||
#define FREERTOS_IP_CONFIG_H
|
||||
|
||||
#define ipconfigUSE_IPv4 ( 1 )
|
||||
|
||||
#define ipconfigUSE_IPv6 ( 0 )
|
||||
|
||||
#define ipconfigUSE_DHCPv6 0
|
||||
#define ipconfigIPv4_BACKWARD_COMPATIBLE 0
|
||||
#define ipconfigUSE_ARP_REVERSED_LOOKUP 1
|
||||
#define ipconfigUSE_LOOPBACK 0
|
||||
#define ipconfigUSE_ARP_REMOVE_ENTRY 1
|
||||
#define ipconfigARP_STORES_REMOTE_ADDRESSES 1
|
||||
#define ipconfigUSE_LINKED_RX_MESSAGES 1
|
||||
#define ipconfigFORCE_IP_DONT_FRAGMENT 1
|
||||
#define ipconfigUSE_DHCP 1
|
||||
#define ipconfigDHCP_FALL_BACK_AUTO_IP 1
|
||||
#define ipconfigARP_USE_CLASH_DETECTION 1
|
||||
#define ipconfigUSE_LLMNR 0
|
||||
#define ipconfigUSE_NBNS 0
|
||||
#define ipconfigUSE_MDNS 0
|
||||
#define ipconfigSUPPORT_OUTGOING_PINGS 1
|
||||
#define ipconfigETHERNET_DRIVER_FILTERS_PACKETS 0
|
||||
#define ipconfigZERO_COPY_TX_DRIVER 1
|
||||
#define ipconfigZERO_COPY_RX_DRIVER 1
|
||||
#define ipconfigDRIVER_INCLUDED_TX_IP_CHECKSUM 1
|
||||
#define ipconfigSOCKET_HAS_USER_SEMAPHORE 1
|
||||
#define ipconfigSELECT_USES_NOTIFY 1
|
||||
#define ipconfigSUPPORT_SIGNALS 1
|
||||
#define ipconfigPROCESS_CUSTOM_ETHERNET_FRAMES 0
|
||||
#define ipconfigDNS_USE_CALLBACKS 0
|
||||
#define ipconfigIGNORE_UNKNOWN_PACKETS 1
|
||||
#define ipconfigCHECK_IP_QUEUE_SPACE 1
|
||||
#define ipconfigUDP_MAX_RX_PACKETS 1
|
||||
#define ipconfigETHERNET_MINIMUM_PACKET_BYTES 1
|
||||
#define ipconfigTCP_IP_SANITY 1
|
||||
#define ipconfigSUPPORT_NETWORK_DOWN_EVENT 1
|
||||
|
||||
/* Set to 1 to print out debug messages. If ipconfigHAS_DEBUG_PRINTF is set to
|
||||
* 1 then FreeRTOS_debug_printf should be defined to the function used to print
|
||||
* out the debugging messages. */
|
||||
#define ipconfigHAS_DEBUG_PRINTF 0
|
||||
#if ( ipconfigHAS_DEBUG_PRINTF == 1 )
|
||||
#define FreeRTOS_debug_printf( X ) printf X
|
||||
#endif
|
||||
|
||||
/* Set to 1 to print out non debugging messages, for example the output of the
|
||||
* FreeRTOS_netstat() command, and ping replies. If ipconfigHAS_PRINTF is set to 1
|
||||
* then FreeRTOS_printf should be set to the function used to print out the
|
||||
* messages. */
|
||||
#define ipconfigHAS_PRINTF 0
|
||||
#if ( ipconfigHAS_PRINTF == 1 )
|
||||
#define FreeRTOS_printf( X ) printf X
|
||||
#endif
|
||||
|
||||
/* Define the byte order of the target MCU (the MCU FreeRTOS+TCP is executing
|
||||
* on). Valid options are pdFREERTOS_BIG_ENDIAN and pdFREERTOS_LITTLE_ENDIAN. */
|
||||
#define ipconfigBYTE_ORDER pdFREERTOS_LITTLE_ENDIAN
|
||||
|
||||
/* If the network card/driver includes checksum offloading then set
|
||||
* ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM to 1 to prevent the software
|
||||
* stack repeating the checksum calculations. */
|
||||
#define ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM 1
|
||||
|
||||
/* Several API's will block until the result is known, or the action has been
|
||||
* performed, for example FreeRTOS_send() and FreeRTOS_recv(). The timeouts can be
|
||||
* set per socket, using setsockopt(). If not set, the times below will be
|
||||
* used as defaults. */
|
||||
#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME ( 5000 )
|
||||
#define ipconfigSOCK_DEFAULT_SEND_BLOCK_TIME ( 5000 )
|
||||
|
||||
/* Include support for DNS caching. For TCP, having a small DNS cache is very
|
||||
* useful. When a cache is present, ipconfigDNS_REQUEST_ATTEMPTS can be kept low
|
||||
* and also DNS may use small timeouts. If a DNS reply comes in after the DNS
|
||||
* socket has been destroyed, the result will be stored into the cache. The next
|
||||
* call to FreeRTOS_gethostbyname() will return immediately, without even creating
|
||||
* a socket.
|
||||
*/
|
||||
#define ipconfigUSE_DNS_CACHE ( 1 )
|
||||
#define ipconfigDNS_CACHE_ADDRESSES_PER_ENTRY ( 6 )
|
||||
#define ipconfigDNS_REQUEST_ATTEMPTS ( 2 )
|
||||
|
||||
/* The IP stack executes it its own task (although any application task can make
|
||||
* use of its services through the published sockets API). ipconfigUDP_TASK_PRIORITY
|
||||
* sets the priority of the task that executes the IP stack. The priority is a
|
||||
* standard FreeRTOS task priority so can take any value from 0 (the lowest
|
||||
* priority) to (configMAX_PRIORITIES - 1) (the highest priority).
|
||||
* configMAX_PRIORITIES is a standard FreeRTOS configuration parameter defined in
|
||||
* FreeRTOSConfig.h, not FreeRTOSIPConfig.h. Consideration needs to be given as to
|
||||
* the priority assigned to the task executing the IP stack relative to the
|
||||
* priority assigned to tasks that use the IP stack. */
|
||||
#define ipconfigIP_TASK_PRIORITY ( configMAX_PRIORITIES - 2 )
|
||||
|
||||
/* The size, in words (not bytes), of the stack allocated to the FreeRTOS+TCP
|
||||
* task. This setting is less important when the FreeRTOS Win32 simulator is used
|
||||
* as the Win32 simulator only stores a fixed amount of information on the task
|
||||
* stack. FreeRTOS includes optional stack overflow detection, see:
|
||||
* http://www.freertos.org/Stacks-and-stack-overflow-checking.html. */
|
||||
#define ipconfigIP_TASK_STACK_SIZE_WORDS ( configMINIMAL_STACK_SIZE * 5 )
|
||||
|
||||
/* If ipconfigUSE_NETWORK_EVENT_HOOK is set to 1 then FreeRTOS+TCP will call the
|
||||
* network event hook at the appropriate times. If ipconfigUSE_NETWORK_EVENT_HOOK
|
||||
* is not set to 1 then the network event hook will never be called. See:
|
||||
* https://freertos.org/Documentation/03-Libraries/02-FreeRTOS-plus/02-FreeRTOS-plus-TCP/09-API-reference/57-vApplicationIPNetworkEventHook.
|
||||
*/
|
||||
#define ipconfigUSE_NETWORK_EVENT_HOOK 1
|
||||
|
||||
/* Sockets have a send block time attribute. If FreeRTOS_sendto() is called but
|
||||
* a network buffer cannot be obtained then the calling task is held in the Blocked
|
||||
* state (so other tasks can continue to executed) until either a network buffer
|
||||
* becomes available or the send block time expires. If the send block time expires
|
||||
* then the send operation is aborted. The maximum allowable send block time is
|
||||
* capped to the value set by ipconfigMAX_SEND_BLOCK_TIME_TICKS. Capping the
|
||||
* maximum allowable send block time prevents prevents a deadlock occurring when
|
||||
* all the network buffers are in use and the tasks that process (and subsequently
|
||||
* free) the network buffers are themselves blocked waiting for a network buffer.
|
||||
* ipconfigMAX_SEND_BLOCK_TIME_TICKS is specified in RTOS ticks. A time in
|
||||
* milliseconds can be converted to a time in ticks using pdMS_TO_TICKS().*/
|
||||
#define ipconfigUDP_MAX_SEND_BLOCK_TIME_TICKS pdMS_TO_TICKS( 5000U )
|
||||
|
||||
/* If ipconfigUSE_DHCP is 1 then FreeRTOS+TCP will attempt to retrieve an IP
|
||||
* address, netmask, DNS server address and gateway address from a DHCP server. If
|
||||
* ipconfigUSE_DHCP is 0 then FreeRTOS+TCP will use a static IP address. The
|
||||
* stack will revert to using the static IP address even when ipconfigUSE_DHCP is
|
||||
* set to 1 if a valid configuration cannot be obtained from a DHCP server for any
|
||||
* reason. The static configuration used is that passed into the stack by the
|
||||
* FreeRTOS_IPInit() function call. */
|
||||
#define ipconfigUSE_DHCP 1
|
||||
#define ipconfigDHCP_REGISTER_HOSTNAME 1
|
||||
#define ipconfigDHCP_USES_UNICAST 1
|
||||
|
||||
/* If ipconfigDHCP_USES_USER_HOOK is set to 1 then the application writer must
|
||||
* provide an implementation of the DHCP callback function,
|
||||
* xApplicationDHCPUserHook(). */
|
||||
#define ipconfigUSE_DHCP_HOOK 1
|
||||
|
||||
/* When ipconfigUSE_DHCP is set to 1, DHCP requests will be sent out at
|
||||
* increasing time intervals until either a reply is received from a DHCP server
|
||||
* and accepted, or the interval between transmissions reaches
|
||||
* ipconfigMAXIMUM_DISCOVER_TX_PERIOD. The IP stack will revert to using the
|
||||
* static IP address passed as a parameter to FreeRTOS_IPInit() if the
|
||||
* re-transmission time interval reaches ipconfigMAXIMUM_DISCOVER_TX_PERIOD without
|
||||
* a DHCP reply being received. */
|
||||
#define ipconfigMAXIMUM_DISCOVER_TX_PERIOD pdMS_TO_TICKS( 120000U )
|
||||
|
||||
/* The ARP cache is a table that maps IP addresses to MAC addresses. The IP
|
||||
* stack can only send a UDP message to a remove IP address if it knowns the MAC
|
||||
* address associated with the IP address, or the MAC address of the router used to
|
||||
* contact the remote IP address. When a UDP message is received from a remote IP
|
||||
* address the MAC address and IP address are added to the ARP cache. When a UDP
|
||||
* message is sent to a remote IP address that does not already appear in the ARP
|
||||
* cache then the UDP message is replaced by a ARP message that solicits the
|
||||
* required MAC address information. ipconfigARP_CACHE_ENTRIES defines the maximum
|
||||
* number of entries that can exist in the ARP table at any one time. */
|
||||
#define ipconfigARP_CACHE_ENTRIES 6
|
||||
|
||||
/* ARP requests that do not result in an ARP response will be re-transmitted a
|
||||
* maximum of ipconfigMAX_ARP_RETRANSMISSIONS times before the ARP request is
|
||||
* aborted. */
|
||||
#define ipconfigMAX_ARP_RETRANSMISSIONS ( 5 )
|
||||
|
||||
/* ipconfigMAX_ARP_AGE defines the maximum time between an entry in the ARP
|
||||
* table being created or refreshed and the entry being removed because it is stale.
|
||||
* New ARP requests are sent for ARP cache entries that are nearing their maximum
|
||||
* age. ipconfigMAX_ARP_AGE is specified in tens of seconds, so a value of 150 is
|
||||
* equal to 1500 seconds (or 25 minutes). */
|
||||
#define ipconfigMAX_ARP_AGE 150
|
||||
|
||||
/* Implementing FreeRTOS_inet_addr() necessitates the use of string handling
|
||||
* routines, which are relatively large. To save code space the full
|
||||
* FreeRTOS_inet_addr() implementation is made optional, and a smaller and faster
|
||||
* alternative called FreeRTOS_inet_addr_quick() is provided. FreeRTOS_inet_addr()
|
||||
* takes an IP in decimal dot format (for example, "192.168.0.1") as its parameter.
|
||||
* FreeRTOS_inet_addr_quick() takes an IP address as four separate numerical octets
|
||||
* (for example, 192, 168, 0, 1) as its parameters. If
|
||||
* ipconfigINCLUDE_FULL_INET_ADDR is set to 1 then both FreeRTOS_inet_addr() and
|
||||
* FreeRTOS_indet_addr_quick() are available. If ipconfigINCLUDE_FULL_INET_ADDR is
|
||||
* not set to 1 then only FreeRTOS_indet_addr_quick() is available. */
|
||||
#define ipconfigINCLUDE_FULL_INET_ADDR 1
|
||||
|
||||
/* ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS defines the total number of network buffer that
|
||||
* are available to the IP stack. The total number of network buffers is limited
|
||||
* to ensure the total amount of RAM that can be consumed by the IP stack is capped
|
||||
* to a pre-determinable value. */
|
||||
#define ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS 20
|
||||
|
||||
/* A FreeRTOS queue is used to send events from application tasks to the IP
|
||||
* stack. ipconfigEVENT_QUEUE_LENGTH sets the maximum number of events that can
|
||||
* be queued for processing at any one time. The event queue must be a minimum of
|
||||
* 5 greater than the total number of network buffers. */
|
||||
#define ipconfigEVENT_QUEUE_LENGTH \
|
||||
( ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS + 5 )
|
||||
|
||||
/* The address of a socket is the combination of its IP address and its port
|
||||
* number. FreeRTOS_bind() is used to manually allocate a port number to a socket
|
||||
* (to 'bind' the socket to a port), but manual binding is not normally necessary
|
||||
* for client sockets (those sockets that initiate outgoing connections rather than
|
||||
* wait for incoming connections on a known port number). If
|
||||
* ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 1 then calling
|
||||
* FreeRTOS_sendto() on a socket that has not yet been bound will result in the IP
|
||||
* stack automatically binding the socket to a port number from the range
|
||||
* socketAUTO_PORT_ALLOCATION_START_NUMBER to 0xffff. If
|
||||
* ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 0 then calling FreeRTOS_sendto()
|
||||
* on a socket that has not yet been bound will result in the send operation being
|
||||
* aborted. */
|
||||
#define ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND 1
|
||||
|
||||
/* Defines the Time To Live (TTL) values used in outgoing UDP packets. */
|
||||
#define ipconfigUDP_TIME_TO_LIVE 128
|
||||
/* Also defined in FreeRTOSIPConfigDefaults.h. */
|
||||
#define ipconfigTCP_TIME_TO_LIVE 128
|
||||
|
||||
/* USE_TCP: Use TCP and all its features. */
|
||||
#define ipconfigUSE_TCP ( 0 )
|
||||
|
||||
/* USE_WIN: Let TCP use windowing mechanism. */
|
||||
#define ipconfigUSE_TCP_WIN ( 1 )
|
||||
|
||||
/* The MTU is the maximum number of bytes the payload of a network frame can
|
||||
* contain. For normal Ethernet V2 frames the maximum MTU is 1500. Setting a
|
||||
* lower value can save RAM, depending on the buffer management scheme used. If
|
||||
* ipconfigCAN_FRAGMENT_OUTGOING_PACKETS is 1 then (ipconfigNETWORK_MTU - 28) must
|
||||
* be divisible by 8. */
|
||||
#define ipconfigNETWORK_MTU 1500U
|
||||
|
||||
/* Set ipconfigUSE_DNS to 1 to include a basic DNS client/resolver. DNS is used
|
||||
* through the FreeRTOS_gethostbyname() API function. */
|
||||
#define ipconfigUSE_DNS 1
|
||||
|
||||
/* If ipconfigREPLY_TO_INCOMING_PINGS is set to 1 then the IP stack will
|
||||
* generate replies to incoming ICMP echo (ping) requests. */
|
||||
#define ipconfigREPLY_TO_INCOMING_PINGS 1
|
||||
|
||||
/* If ipconfigSUPPORT_OUTGOING_PINGS is set to 1 then the
|
||||
* FreeRTOS_SendPingRequest() API function is available. */
|
||||
#define ipconfigSUPPORT_OUTGOING_PINGS 1
|
||||
|
||||
/* If ipconfigSUPPORT_SELECT_FUNCTION is set to 1 then the FreeRTOS_select()
|
||||
* (and associated) API function is available. */
|
||||
#define ipconfigSUPPORT_SELECT_FUNCTION 1
|
||||
|
||||
/* If ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES is set to 1 then Ethernet frames
|
||||
* that are not in Ethernet II format will be dropped. This option is included for
|
||||
* potential future IP stack developments. */
|
||||
#define ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES 1
|
||||
|
||||
/* If ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES is set to 1 then it is the
|
||||
* responsibility of the Ethernet interface to filter out packets that are of no
|
||||
* interest. If the Ethernet interface does not implement this functionality, then
|
||||
* set ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES to 0 to have the IP stack
|
||||
* perform the filtering instead (it is much less efficient for the stack to do it
|
||||
* because the packet will already have been passed into the stack). If the
|
||||
* Ethernet driver does all the necessary filtering in hardware then software
|
||||
* filtering can be removed by using a value other than 1 or 0. */
|
||||
#define ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES 1
|
||||
|
||||
/* The windows simulator cannot really simulate MAC interrupts, and needs to
|
||||
* block occasionally to allow other tasks to run. */
|
||||
#define configWINDOWS_MAC_INTERRUPT_SIMULATOR_DELAY pdMS_TO_TICKS( 20 )
|
||||
|
||||
/* Advanced only: in order to access 32-bit fields in the IP packets with
|
||||
* 32-bit memory instructions, all packets will be stored 32-bit-aligned,
|
||||
* plus 16-bits. This has to do with the contents of the IP-packets: all
|
||||
* 32-bit fields are 32-bit-aligned, plus 16-bit. */
|
||||
#define ipconfigPACKET_FILLER_SIZE 2U
|
||||
|
||||
/* Define the size of the pool of TCP window descriptors. On the average, each
|
||||
* TCP socket will use up to 2 x 6 descriptors, meaning that it can have 2 x 6
|
||||
* outstanding packets (for Rx and Tx). When using up to 10 TP sockets
|
||||
* simultaneously, one could define TCP_WIN_SEG_COUNT as 120. */
|
||||
#define ipconfigTCP_WIN_SEG_COUNT 240
|
||||
|
||||
/* Each TCP socket has a circular buffers for Rx and Tx, which have a fixed
|
||||
* maximum size. Define the size of Rx buffer for TCP sockets. */
|
||||
#define ipconfigTCP_RX_BUFFER_LENGTH ( 10000 )
|
||||
|
||||
/* Define the size of Tx buffer for TCP sockets. */
|
||||
#define ipconfigTCP_TX_BUFFER_LENGTH ( 10000 )
|
||||
|
||||
/* When using call-back handlers, the driver may check if the handler points to
|
||||
* real program memory (RAM or flash) or just has a random non-zero value. */
|
||||
#define ipconfigIS_VALID_PROG_ADDRESS( x ) ( ( x ) != NULL )
|
||||
|
||||
/* Include support for TCP keep-alive messages. */
|
||||
#define ipconfigTCP_KEEP_ALIVE ( 1 )
|
||||
#define ipconfigTCP_KEEP_ALIVE_INTERVAL ( 20 ) /* Seconds. */
|
||||
|
||||
#define ipconfigSOCKET_HAS_USER_WAKE_CALLBACK ( 1 )
|
||||
#define ipconfigUSE_CALLBACKS ( 1 )
|
||||
|
||||
|
||||
#define portINLINE __inline
|
||||
|
||||
#define ipconfigISO_STRICTNESS_VIOLATION_START \
|
||||
_Pragma("GCC diagnostic push") \
|
||||
_Pragma("GCC diagnostic ignored \"-Wpedantic\"")
|
||||
|
||||
#define ipconfigISO_STRICTNESS_VIOLATION_END _Pragma("GCC diagnostic pop")
|
||||
|
||||
#endif /* FREERTOS_IP_CONFIG_H */
|
||||
@@ -0,0 +1,24 @@
|
||||
/*
|
||||
* ipc_eth_consumer.h
|
||||
*
|
||||
* Created on: 11.08.2026
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
#ifndef INC_IPC_IPC_ETH_CONSUMER_H_
|
||||
#define INC_IPC_IPC_ETH_CONSUMER_H_
|
||||
|
||||
typedef struct IPC_ETH_CONSUMER_Context *IPC_ETH_CONSUMER_Context_t;
|
||||
|
||||
typedef struct IPC_ETH_CONSUMER_Handle
|
||||
{
|
||||
IPC_ETH_CONSUMER_Context_t priv;
|
||||
struct
|
||||
{
|
||||
|
||||
} functions;
|
||||
} *IPC_ETH_CONSUMER_Handle_t;
|
||||
|
||||
IPC_ETH_CONSUMER_Handle_t IPC_ETH_CONSUMER_Init(const char *endpoint);
|
||||
|
||||
#endif /* INC_IPC_IPC_ETH_CONSUMER_H_ */
|
||||
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32h7xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
@@ -0,0 +1,520 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#ifndef STM32H7xx_HAL_CONF_H_PRE
|
||||
#define STM32H7xx_HAL_CONF_H_PRE
|
||||
|
||||
#define ETH_RX_BUF_SIZE 1526
|
||||
|
||||
#endif
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32H7xx_HAL_CONF_H
|
||||
#define STM32H7xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_FDCAN_MODULE_ENABLED */
|
||||
/* #define HAL_FMAC_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_COMP_MODULE_ENABLED */
|
||||
/* #define HAL_CORDIC_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
#define HAL_ETH_MODULE_ENABLED
|
||||
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_OTFDEC_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_HRTIM_MODULE_ENABLED */
|
||||
/* #define HAL_HSEM_MODULE_ENABLED */
|
||||
/* #define HAL_GFXMMU_MODULE_ENABLED */
|
||||
/* #define HAL_JPEG_MODULE_ENABLED */
|
||||
/* #define HAL_OPAMP_MODULE_ENABLED */
|
||||
/* #define HAL_OSPI_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_RAMECC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_SWPMI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_JPEG_MODULE_ENABLED */
|
||||
/* #define HAL_MDIOS_MODULE_ENABLED */
|
||||
/* #define HAL_PSSI_MODULE_ENABLED */
|
||||
/* #define HAL_DTS_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_MDMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_HSEM_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal oscillator (CSI) default value.
|
||||
* This value is the default CSI value after Reset.
|
||||
*/
|
||||
#if !defined (CSI_VALUE)
|
||||
#define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* CSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0
|
||||
#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */
|
||||
#define USE_SPI_CRC 0U /*!< use CRC in SPI */
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
|
||||
#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */
|
||||
#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */
|
||||
#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */
|
||||
#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################### Ethernet Configuration ######################### */
|
||||
#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */
|
||||
#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */
|
||||
|
||||
#define ETH_MAC_ADDR0 (0x02UL)
|
||||
#define ETH_MAC_ADDR1 (0x00UL)
|
||||
#define ETH_MAC_ADDR2 (0x00UL)
|
||||
#define ETH_MAC_ADDR3 (0x00UL)
|
||||
#define ETH_MAC_ADDR4 (0x00UL)
|
||||
#define ETH_MAC_ADDR5 (0x00UL)
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MDMA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mdma.h"
|
||||
#endif /* HAL_MDMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DTS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dts.h"
|
||||
#endif /* HAL_DTS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_eth_legacy.h"
|
||||
#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_fdcan.h"
|
||||
#endif /* HAL_FDCAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORDIC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cordic.h"
|
||||
#endif /* HAL_CORDIC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GFXMMU_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_gfxmmu.h"
|
||||
#endif /* HAL_GFXMMU_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMAC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_fmac.h"
|
||||
#endif /* HAL_FMAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HRTIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hrtim.h"
|
||||
#endif /* HAL_HRTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HSEM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hsem.h"
|
||||
#endif /* HAL_HSEM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_JPEG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_jpeg.h"
|
||||
#endif /* HAL_JPEG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MDIOS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mdios.h"
|
||||
#endif /* HAL_MDIOS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ospi.h"
|
||||
#endif /* HAL_OSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OTFDEC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_otfdec.h"
|
||||
#endif /* HAL_OTFDEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PSSI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pssi.h"
|
||||
#endif /* HAL_PSSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RAMECC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ramecc.h"
|
||||
#endif /* HAL_RAMECC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32H7xx_HAL_CONF_H */
|
||||
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32H7xx_IT_H
|
||||
#define __STM32H7xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void ETH_IRQHandler(void);
|
||||
void CM7_SEV_IRQHandler(void);
|
||||
void HSEM2_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32H7xx_IT_H */
|
||||
@@ -0,0 +1,466 @@
|
||||
/*
|
||||
* ipc_eth_consumer.c
|
||||
*
|
||||
* Created on: 11.08.2026
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#include "main.h"
|
||||
#include "openamp.h"
|
||||
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "queue.h"
|
||||
#include "stdio.h"
|
||||
#include "assert.h"
|
||||
|
||||
#include "FreeRTOS_IP.h"
|
||||
#include "FreeRTOS_Sockets.h"
|
||||
|
||||
#include "message_buffer.h"
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#include "IPC/ipc_eth_consumer.h"
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
struct IPC_ETH_CONSUMER_Context
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
struct rpmsg_endpoint rp_endpoint;
|
||||
MessageBufferHandle_t mbufH;
|
||||
TaskHandle_t taskH;
|
||||
QueueHandle_t reqQH;
|
||||
int running;
|
||||
char endpoint[64];
|
||||
char payload[1520];
|
||||
char rxNetBuff[1520];
|
||||
uint32_t ipaddr;
|
||||
uint32_t bcast;
|
||||
uint32_t subnet;
|
||||
int ready;
|
||||
};
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#define IPC_PKT_HEADERLEN (20 )
|
||||
#define IPC_PKT_CONTROL_TYPE (0xDEADBEEF )
|
||||
#define IPC_PKT_ETHERNET_TYPE (0xDEADC0DE )
|
||||
#define IPC_PKT_DISCOVERY_TYPE (0xDEADDA7A )
|
||||
#define IPC_PKT_MAXSIZE (RPMSG_BUFFER_SIZE-32-IPC_PKT_HEADERLEN)
|
||||
|
||||
#define IPC_CTRL_TYPE_GETPENDING (0x80 )
|
||||
#define IPC_CTRL_TYPE_GETIPADDR (0xF0 )
|
||||
#define IPC_CTRL_TYPE_GETSUBNET (0xF1 )
|
||||
|
||||
#define IPC_CTRLREMOTE_SPINDLE_START (0xA0 )
|
||||
#define IPC_CTRLREMOTE_SPINDLE_STOP (0xA1 )
|
||||
#define IPC_CTRLREMOTE_STEP_RESET (0xA2 )
|
||||
#define IPC_CTRLREMOTE_STEP_REF (0xA3 )
|
||||
#define IPC_CTRLREMOTE_STEP_ON (0xA4 )
|
||||
#define IPC_CTRLREMOTE_STEP_OFF (0xA5 )
|
||||
#define IPC_CTRLREMOTE_STEP_MOVE (0xA6 )
|
||||
#define IPC_CTRLREMOTE_MAX_LENGTH (20 )
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
typedef struct ipc_eth_packet
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
unsigned int magic;
|
||||
unsigned int type;
|
||||
unsigned int length;
|
||||
unsigned int seqID;
|
||||
int result;
|
||||
char payload[IPC_PKT_MAXSIZE];
|
||||
} __attribute__((packed)) ipc_eth_packet_t;
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static ipc_eth_packet_t heartbeatPayload = {
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
.magic = IPC_PKT_DISCOVERY_TYPE,
|
||||
.type = 0,
|
||||
.length = 37,
|
||||
.result = 0,
|
||||
.seqID = 0,
|
||||
.payload = "Hello from STM32H755ZI-Q on ARM CM4!"
|
||||
};
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static int ipc_eth_ConsumerRpMsgRxClb(struct rpmsg_endpoint *ep, void *data, size_t len, uint32_t src, void *priv)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)ep;
|
||||
(void)src;
|
||||
|
||||
if(!priv)
|
||||
return -1;
|
||||
|
||||
IPC_ETH_CONSUMER_Handle_t h = (IPC_ETH_CONSUMER_Handle_t)priv;
|
||||
if(len < IPC_PKT_HEADERLEN)
|
||||
return 0;
|
||||
|
||||
if(!h->priv->ready)
|
||||
{
|
||||
ipc_eth_packet_t *req = (ipc_eth_packet_t *)data;
|
||||
req->result = -2;
|
||||
req->length = 0;
|
||||
OPENAMP_send(&h->priv->rp_endpoint, req, req->length + IPC_PKT_HEADERLEN);
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ignore overflow cases, because we can not give errors back in that framework
|
||||
xMessageBufferSend(h->priv->mbufH, data, len, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static int ipc_eth_ConsumerHandleControl(IPC_ETH_CONSUMER_Handle_t h, ipc_eth_packet_t *req)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
if (!req)
|
||||
return -1;
|
||||
|
||||
req->length = 0;
|
||||
if(req->type != IPC_CTRL_TYPE_GETIPADDR && req->type != IPC_CTRL_TYPE_GETSUBNET && req->type != IPC_CTRL_TYPE_GETPENDING)
|
||||
return -1;
|
||||
|
||||
if( req->type != IPC_CTRL_TYPE_GETPENDING) {
|
||||
req->length = 4;
|
||||
uint32_t source = h->priv->ipaddr;
|
||||
if ( req->type == IPC_CTRL_TYPE_GETSUBNET )
|
||||
source = h->priv->subnet;
|
||||
|
||||
memcpy(req->payload, &source, sizeof(source));
|
||||
}
|
||||
else {
|
||||
int index = 0;
|
||||
req->result = 0;
|
||||
while( pdPASS == xQueueReceive(h->priv->reqQH, &req->payload[index * (IPC_CTRLREMOTE_MAX_LENGTH+IPC_PKT_HEADERLEN)], 0) ) {
|
||||
index += 1;
|
||||
if ( index > 8)
|
||||
break;
|
||||
req->length = index * (IPC_CTRLREMOTE_MAX_LENGTH+IPC_PKT_HEADERLEN);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static void ipc_eth_ConsumerTaskFunction( void * arg )
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
IPC_ETH_CONSUMER_Handle_t h = (IPC_ETH_CONSUMER_Handle_t)arg;
|
||||
size_t bLen = 0;
|
||||
int rxLen = 0;
|
||||
BaseType_t ret;
|
||||
Socket_t xSocket = FREERTOS_INVALID_SOCKET;
|
||||
const TickType_t tmFlag = 0;
|
||||
struct freertos_sockaddr xDestinationAddress;
|
||||
struct freertos_sockaddr xLocalAddress;
|
||||
struct freertos_sockaddr xRecvAddress;
|
||||
socklen_t xRecvAddressLen;
|
||||
int status = 0;
|
||||
int rounds = 0;
|
||||
|
||||
uint32_t ulIPAddress;
|
||||
uint32_t ulBroadcast;
|
||||
uint32_t ulNetMask;
|
||||
NetworkInterface_t *pxInterface = NULL;
|
||||
NetworkEndPoint_t *pxEndPoint = NULL;;
|
||||
|
||||
if(!h)
|
||||
goto error;
|
||||
|
||||
if (!h->priv)
|
||||
goto error;
|
||||
|
||||
MAILBOX_Init();
|
||||
|
||||
if (MX_OPENAMP_Init(RPMSG_REMOTE, NULL))
|
||||
goto error;
|
||||
|
||||
status = OPENAMP_create_endpoint(&h->priv->rp_endpoint, h->priv->endpoint, RPMSG_ADDR_ANY,
|
||||
ipc_eth_ConsumerRpMsgRxClb, NULL);
|
||||
if (status < 0)
|
||||
goto error;
|
||||
|
||||
// set this instance as private data
|
||||
h->priv->rp_endpoint.priv = h;
|
||||
h->priv->ready = 0;
|
||||
|
||||
while(h->priv->running) {
|
||||
h->priv->ready = 0;
|
||||
rounds = 0;
|
||||
heartbeatPayload.seqID = 0;
|
||||
|
||||
// make sure, we always proceed only, when the stack is ready!
|
||||
while(xIPIsNetworkTaskReady() == pdFALSE) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1));
|
||||
OPENAMP_check_for_message();
|
||||
if (h->priv->running == 0)
|
||||
break;
|
||||
}
|
||||
|
||||
pxInterface = FreeRTOS_FirstNetworkInterface();
|
||||
if(pxInterface == NULL) {
|
||||
goto error;
|
||||
}
|
||||
|
||||
// wait for PHY link detection
|
||||
if (pxInterface->pfGetPhyLinkStatus != NULL)
|
||||
{
|
||||
while(pxInterface->pfGetPhyLinkStatus(pxInterface) != pdTRUE ) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1));
|
||||
OPENAMP_check_for_message();
|
||||
if (h->priv->running == 0)
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
pxEndPoint = FreeRTOS_FirstEndPoint( pxInterface );
|
||||
while( pxEndPoint != NULL )
|
||||
{
|
||||
#if ( ipconfigUSE_IPv6 != 0 )
|
||||
if( pxEndPoint->bits.bIPv6 != pdFALSE ) {
|
||||
pxEndPoint = FreeRTOS_NextEndPoint( pxInterface, pxEndPoint );
|
||||
continue;
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
|
||||
if( pxEndPoint == NULL ) {
|
||||
goto error;
|
||||
}
|
||||
|
||||
xSocket = FreeRTOS_socket( FREERTOS_AF_INET, FREERTOS_SOCK_DGRAM, FREERTOS_IPPROTO_UDP );
|
||||
if(xSocket == FREERTOS_INVALID_SOCKET) {
|
||||
h->priv->running = 0;
|
||||
}
|
||||
|
||||
if ( xSocket != FREERTOS_INVALID_SOCKET ) {
|
||||
// in free rtos stack we do not have to set the broadcast flag for a socket explicitly!
|
||||
//ret = FreeRTOS_setsockopt(xSocket, 0, SO_BROADCAST, &bFlag, sizeof(bFlag));
|
||||
//if(ret) {
|
||||
// FreeRTOS_closesocket(xSocket);
|
||||
// h->priv->running = 0;
|
||||
//}
|
||||
|
||||
// we set the reception timeout to zero here
|
||||
ret = FreeRTOS_setsockopt(xSocket, 0, FREERTOS_SO_RCVTIMEO, &tmFlag, sizeof(tmFlag));
|
||||
if(ret) {
|
||||
FreeRTOS_closesocket(xSocket);
|
||||
h->priv->running = 0;
|
||||
}
|
||||
|
||||
//why the hack the broadcast address is completely wrong in this network stack? we fix it now!
|
||||
pxEndPoint->ipv4_defaults.ulBroadcastAddress = ( pxEndPoint->ipv4_defaults.ulIPAddress & pxEndPoint->ipv4_defaults.ulNetMask )
|
||||
| ~pxEndPoint->ipv4_defaults.ulNetMask;
|
||||
pxEndPoint->ipv4_settings.ulBroadcastAddress = ( pxEndPoint->ipv4_settings.ulIPAddress & pxEndPoint->ipv4_settings.ulNetMask )
|
||||
| ~pxEndPoint->ipv4_settings.ulNetMask;
|
||||
|
||||
if (pxEndPoint->ipv4_settings.ulIPAddress == 0) {
|
||||
ulIPAddress = pxEndPoint->ipv4_defaults.ulIPAddress;
|
||||
ulNetMask = pxEndPoint->ipv4_defaults.ulNetMask;
|
||||
ulBroadcast = pxEndPoint->ipv4_defaults.ulBroadcastAddress;
|
||||
}
|
||||
else{
|
||||
ulIPAddress = pxEndPoint->ipv4_settings.ulIPAddress;
|
||||
ulNetMask = pxEndPoint->ipv4_settings.ulNetMask;
|
||||
ulBroadcast = pxEndPoint->ipv4_settings.ulBroadcastAddress;
|
||||
}
|
||||
|
||||
h->priv->ipaddr = ulIPAddress;
|
||||
h->priv->bcast = ulBroadcast;
|
||||
h->priv->subnet = ulNetMask;
|
||||
|
||||
|
||||
xDestinationAddress.sin_len = sizeof(xDestinationAddress);
|
||||
xDestinationAddress.sin_address.ulIP_IPv4 = ulBroadcast;
|
||||
xDestinationAddress.sin_port = FreeRTOS_htons( 10000 );
|
||||
xDestinationAddress.sin_family = FREERTOS_AF_INET4;
|
||||
|
||||
xLocalAddress.sin_len = sizeof(xLocalAddress);
|
||||
xLocalAddress.sin_address.ulIP_IPv4 = 0;
|
||||
xLocalAddress.sin_port = FreeRTOS_htons( 10000 );
|
||||
xLocalAddress.sin_family = FREERTOS_AF_INET4;
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
ret = FreeRTOS_bind(xSocket, &xLocalAddress, sizeof(struct freertos_sockaddr));
|
||||
if(ret) {
|
||||
FreeRTOS_closesocket(xSocket);
|
||||
h->priv->running = 0;
|
||||
}
|
||||
}
|
||||
|
||||
while(h->priv->running) {
|
||||
rounds += 1;
|
||||
OPENAMP_check_for_message();
|
||||
h->priv->ready = 1;
|
||||
|
||||
// only accept valid packets with at least the full packet size, otherwise ignore them!
|
||||
if ( (bLen = xMessageBufferReceive(h->priv->mbufH, h->priv->payload, sizeof(h->priv->payload), pdMS_TO_TICKS(1))) >= IPC_PKT_HEADERLEN) {
|
||||
|
||||
// check header to decide whether the packet is for control purpose or desired for
|
||||
// Ethernet transmission
|
||||
ipc_eth_packet_t *req = (ipc_eth_packet_t *)h->priv->payload;
|
||||
|
||||
if (req->length <= (bLen - IPC_PKT_HEADERLEN))
|
||||
{
|
||||
switch (req->magic)
|
||||
{
|
||||
case IPC_PKT_CONTROL_TYPE:
|
||||
{
|
||||
req->result = -1;
|
||||
req->result = ipc_eth_ConsumerHandleControl(h, req);
|
||||
break;
|
||||
}
|
||||
case IPC_PKT_ETHERNET_TYPE:
|
||||
{
|
||||
req->result = FreeRTOS_sendto( xSocket, req->payload, req->length, 0,
|
||||
&xDestinationAddress, sizeof( xDestinationAddress ));
|
||||
req->length = 0;
|
||||
break;
|
||||
}
|
||||
case IPC_PKT_DISCOVERY_TYPE:
|
||||
{
|
||||
req->result = FreeRTOS_sendto( xSocket, req, req->length + IPC_PKT_HEADERLEN, 0,
|
||||
&xDestinationAddress, sizeof( xDestinationAddress ));
|
||||
req->length = 0;
|
||||
break;
|
||||
}
|
||||
default:
|
||||
{
|
||||
req->result = -1;
|
||||
req->length = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
OPENAMP_send(&h->priv->rp_endpoint, req, req->length + IPC_PKT_HEADERLEN);
|
||||
}
|
||||
}
|
||||
|
||||
if( rounds >= 1000 ) {
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
if (FreeRTOS_sendto( xSocket, &heartbeatPayload, heartbeatPayload.length + IPC_PKT_HEADERLEN,
|
||||
0, &xDestinationAddress, sizeof( xDestinationAddress ) ) < 0 ) {
|
||||
break;
|
||||
}
|
||||
rounds = 0;
|
||||
}
|
||||
|
||||
if ((rxLen = FreeRTOS_recvfrom(xSocket, h->priv->rxNetBuff, sizeof(h->priv->rxNetBuff),
|
||||
0, &xRecvAddress, &xRecvAddressLen)) >= IPC_PKT_HEADERLEN) {
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
ipc_eth_packet_t *req = (ipc_eth_packet_t *)h->priv->rxNetBuff;
|
||||
|
||||
if (req->magic == IPC_PKT_CONTROL_TYPE && req->type >= IPC_CTRLREMOTE_SPINDLE_START &&
|
||||
req->type <= IPC_CTRLREMOTE_STEP_MOVE && req->length <= IPC_CTRLREMOTE_MAX_LENGTH) {
|
||||
// ignore overruns in case we have some
|
||||
if( req->length <= (size_t)rxLen - IPC_PKT_HEADERLEN )
|
||||
xQueueSend(h->priv->reqQH, req, 0);
|
||||
}
|
||||
}
|
||||
else if(rxLen < 0 && rxLen != FREERTOS_EWOULDBLOCK) {
|
||||
// socket error, so jump out of loop
|
||||
break;
|
||||
}
|
||||
|
||||
// check PHY link detection
|
||||
if (pxInterface->pfGetPhyLinkStatus != NULL)
|
||||
{
|
||||
if(pxInterface->pfGetPhyLinkStatus(pxInterface) != pdTRUE ) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
h->priv->ready = 0;
|
||||
FreeRTOS_closesocket(xSocket);
|
||||
xSocket = FREERTOS_INVALID_SOCKET;
|
||||
}
|
||||
|
||||
error:
|
||||
if (xSocket != FREERTOS_INVALID_SOCKET) {
|
||||
FreeRTOS_closesocket(xSocket);
|
||||
}
|
||||
if (h) {
|
||||
if (h->priv) {
|
||||
if (h->priv->rp_endpoint.priv == h) {
|
||||
// no abstraction for destroying, so calling library function directly
|
||||
rpmsg_destroy_ept(&h->priv->rp_endpoint);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
OPENAMP_DeInit();
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
IPC_ETH_CONSUMER_Handle_t IPC_ETH_CONSUMER_Init(const char *endpoint)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
IPC_ETH_CONSUMER_Handle_t h = NULL;
|
||||
|
||||
if(!endpoint)
|
||||
goto error;
|
||||
|
||||
if(endpoint[0] == '\0')
|
||||
goto error;
|
||||
|
||||
if(!(h = (IPC_ETH_CONSUMER_Handle_t)calloc(1, sizeof(struct IPC_ETH_CONSUMER_Handle))))
|
||||
goto error;
|
||||
|
||||
h->priv = (IPC_ETH_CONSUMER_Context_t)calloc(1, sizeof(struct IPC_ETH_CONSUMER_Context));
|
||||
if(!h->priv)
|
||||
goto error;
|
||||
|
||||
if ((h->priv->mbufH = xMessageBufferCreate(4*IPC_PKT_MAXSIZE)) == NULL)
|
||||
goto error;
|
||||
|
||||
if ((h->priv->reqQH = xQueueCreate(6, IPC_PKT_HEADERLEN + IPC_CTRLREMOTE_MAX_LENGTH)) == NULL)
|
||||
goto error;
|
||||
|
||||
strncpy(h->priv->endpoint, endpoint,
|
||||
sizeof(h->priv->endpoint)-1 < strlen(endpoint) ?
|
||||
sizeof(h->priv->endpoint)-1 : strlen(endpoint));
|
||||
h->priv->endpoint[sizeof(h->priv->endpoint)-1] = '\0';
|
||||
h->priv->running = 1;
|
||||
if (pdPASS != xTaskCreate(ipc_eth_ConsumerTaskFunction, "ipc2eth", 4096, h, configMAX_PRIORITIES - 3, &h->priv->taskH))
|
||||
goto error;
|
||||
|
||||
return h;
|
||||
|
||||
error:
|
||||
if (h) {
|
||||
if(h->priv) {
|
||||
if(h->priv->taskH) {
|
||||
h->priv->running = 0;
|
||||
vTaskDelete(h->priv->taskH);
|
||||
}
|
||||
if(h->priv->mbufH) {
|
||||
vMessageBufferDelete(h->priv->mbufH);
|
||||
}
|
||||
if(h->priv->reqQH) {
|
||||
vQueueDelete(h->priv->reqQH);
|
||||
}
|
||||
free(h->priv);
|
||||
}
|
||||
free(h);
|
||||
}
|
||||
h = NULL;
|
||||
|
||||
return h;
|
||||
}
|
||||
@@ -0,0 +1,505 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "string.h"
|
||||
#include "openamp.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "queue.h"
|
||||
#include "stdio.h"
|
||||
#include "assert.h"
|
||||
|
||||
#include "FreeRTOS_IP.h"
|
||||
#include "FreeRTOS_Sockets.h"
|
||||
#include "FreeRTOS_DHCP.h"
|
||||
#include "FreeRTOS_Routing.h"
|
||||
|
||||
#include "IPC/ipc_eth_consumer.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
extern void initialise_stdlib_abstraction( void );
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
#ifndef HSEM_ID_0
|
||||
#define HSEM_ID_0 (0U) /* HW semaphore 0*/
|
||||
#endif
|
||||
|
||||
typedef struct {
|
||||
uint32_t w[3]; // STM32 UUID: 96 Bit
|
||||
} uuid96_t;
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
#if 0
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma location=0x10040000
|
||||
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
|
||||
#pragma location=0x10040080
|
||||
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
|
||||
|
||||
#elif defined ( __CC_ARM ) /* MDK ARM Compiler */
|
||||
|
||||
__attribute__((at(0x10040000))) ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
|
||||
__attribute__((at(0x10040080))) ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
|
||||
|
||||
#elif defined ( __GNUC__ ) /* GNU Compiler */
|
||||
|
||||
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDescripSection"))); /* Ethernet Rx DMA Descriptors */
|
||||
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDescripSection"))); /* Ethernet Tx DMA Descriptors */
|
||||
#endif
|
||||
|
||||
ETH_TxPacketConfig TxConfig;
|
||||
|
||||
ETH_HandleTypeDef heth;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
#endif
|
||||
ETH_HandleTypeDef heth;
|
||||
|
||||
static UBaseType_t ulNextRand;
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_ETH_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
extern void initialise_stdlib_abstraction( void );
|
||||
|
||||
#define BKPSRAM_BASE 0x38800000UL
|
||||
|
||||
typedef struct {
|
||||
uint32_t magic;
|
||||
uint32_t uuid[3];
|
||||
} device_shared_t;
|
||||
|
||||
#define DEVICE_SHARED \
|
||||
((volatile device_shared_t *)BKPSRAM_BASE)
|
||||
|
||||
static inline void stm32_read_uuid(uuid96_t *u)
|
||||
{
|
||||
if(DEVICE_SHARED->magic != 0x48475531) {
|
||||
u->w[0] = 0xDEADC0DE;
|
||||
u->w[1] = 0xBADEAFFE;
|
||||
u->w[2] = 0xCAFEBABE;
|
||||
} else {
|
||||
u->w[0] = DEVICE_SHARED->uuid[0];
|
||||
u->w[1] = DEVICE_SHARED->uuid[1];
|
||||
u->w[2] = DEVICE_SHARED->uuid[2];
|
||||
}
|
||||
}
|
||||
|
||||
static uint32_t mix32(uint32_t x)
|
||||
{
|
||||
x ^= x >> 16;
|
||||
x *= 0x7feb352d;
|
||||
x ^= x >> 15;
|
||||
x *= 0x846ca68b;
|
||||
x ^= x >> 16;
|
||||
return x;
|
||||
}
|
||||
|
||||
static void uuid_to_mac(uint8_t mac[6], uint32_t ifidx)
|
||||
{
|
||||
uuid96_t u;
|
||||
stm32_read_uuid(&u);
|
||||
|
||||
uint32_t a = mix32(u.w[0] ^ u.w[2] ^ ifidx);
|
||||
uint32_t b = mix32(u.w[1] ^ (ifidx * 0x9e3779b9u));
|
||||
|
||||
mac[0] = (uint8_t)(a >> 24);
|
||||
mac[1] = (uint8_t)(a >> 16);
|
||||
mac[2] = (uint8_t)(a >> 8);
|
||||
mac[3] = (uint8_t)(a);
|
||||
mac[4] = (uint8_t)(b >> 8);
|
||||
mac[5] = (uint8_t)(b);
|
||||
|
||||
mac[0] &= 0xFE; // unicast
|
||||
mac[0] |= 0x02; // locally administered
|
||||
}
|
||||
|
||||
static uint32_t uuid_to_seed(uint32_t ifidx)
|
||||
{
|
||||
uuid96_t u;
|
||||
stm32_read_uuid(&u);
|
||||
|
||||
return mix32(u.w[0] ^ u.w[1] ^ u.w[2] ^ (ifidx * 0x9e3779b9u));
|
||||
}
|
||||
|
||||
static uint32_t uuid_to_ipv4_lla(uint32_t ifidx)
|
||||
{
|
||||
uuid96_t u;
|
||||
stm32_read_uuid(&u);
|
||||
|
||||
uint32_t h = mix32(u.w[0] ^ u.w[1] ^ u.w[2] ^ (ifidx * 0x9e3779b9u));
|
||||
|
||||
uint8_t x = 1 + ((h >> 8) % 254);
|
||||
uint8_t y = 1 + (h & 0xFF);
|
||||
|
||||
return (169u << 24) | (254u << 16) | ((uint32_t)x << 8) | y;
|
||||
}
|
||||
|
||||
void vApplicationMallocFailedHook( void )
|
||||
{
|
||||
taskDISABLE_INTERRUPTS();
|
||||
__asm volatile( "bkpt #0" );
|
||||
for (;;) {;}
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )
|
||||
{
|
||||
( void ) pcTaskName;
|
||||
( void ) pxTask;
|
||||
|
||||
taskDISABLE_INTERRUPTS();
|
||||
__asm volatile( "bkpt #0" );
|
||||
for (;;) {;}
|
||||
}
|
||||
|
||||
void vAssertCalled( const char * const pcFileName, unsigned long ulLine )
|
||||
{
|
||||
volatile uint32_t ulSetToNonZeroInDebuggerToContinue = 0;
|
||||
|
||||
/* Parameters are not used. */
|
||||
( void ) ulLine;
|
||||
( void ) pcFileName;
|
||||
|
||||
taskENTER_CRITICAL();
|
||||
{
|
||||
/* You can step out of this function to debug the assertion by using
|
||||
the debugger to set ulSetToNonZeroInDebuggerToContinue to a non-zero
|
||||
value. */
|
||||
while( ulSetToNonZeroInDebuggerToContinue == 0 )
|
||||
{
|
||||
}
|
||||
}
|
||||
taskEXIT_CRITICAL();
|
||||
}
|
||||
|
||||
int __stdout_put_char(int ch)
|
||||
{
|
||||
(void)ch;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int __stdin_get_char(void)
|
||||
{
|
||||
return EOF;
|
||||
}
|
||||
|
||||
void vApplicationIPNetworkEventHook_Multi( eIPCallbackEvent_t eNetworkEvent,
|
||||
struct xNetworkEndPoint * pxEndPoint )
|
||||
{
|
||||
(void)pxEndPoint;
|
||||
static BaseType_t xTasksAlreadyCreated = pdFALSE;
|
||||
|
||||
/* If the network has just come up...*/
|
||||
if( ( eNetworkEvent == eNetworkUp ) && ( xTasksAlreadyCreated == pdFALSE ) )
|
||||
{
|
||||
/* Do nothing. Just a stub. */
|
||||
|
||||
xTasksAlreadyCreated = pdTRUE;
|
||||
}
|
||||
}
|
||||
|
||||
UBaseType_t uxRand( void )
|
||||
{
|
||||
static uint32_t ulMultiplier = 0;
|
||||
if( !ulMultiplier ) uuid_to_seed(0);
|
||||
const uint32_t ulIncrement = 1UL;
|
||||
|
||||
/* Utility function to generate a pseudo random number. */
|
||||
|
||||
ulNextRand = ( ulMultiplier * ulNextRand ) + ulIncrement;
|
||||
return( ( int ) ( ulNextRand ) & 0x7fffUL );
|
||||
}
|
||||
|
||||
BaseType_t xApplicationGetRandomNumber( uint32_t * pulNumber )
|
||||
{
|
||||
*pulNumber = ( uint32_t ) uxRand();
|
||||
|
||||
return pdTRUE;
|
||||
}
|
||||
|
||||
extern uint32_t ulApplicationGetNextSequenceNumber( uint32_t ulSourceAddress,
|
||||
uint16_t usSourcePort,
|
||||
uint32_t ulDestinationAddress,
|
||||
uint16_t usDestinationPort )
|
||||
{
|
||||
( void ) ulSourceAddress;
|
||||
( void ) usSourcePort;
|
||||
( void ) ulDestinationAddress;
|
||||
( void ) usDestinationPort;
|
||||
|
||||
return ( uint32_t ) uxRand();
|
||||
}
|
||||
|
||||
void vApplicationPingReplyHook( ePingReplyStatus_t eStatus,
|
||||
uint16_t usIdentifier )
|
||||
{
|
||||
(void)eStatus;
|
||||
(void)usIdentifier;
|
||||
/* Provide a stub for this function. */
|
||||
}
|
||||
|
||||
|
||||
eDHCPCallbackAnswer_t xApplicationDHCPHook_Multi( eDHCPCallbackPhase_t eDHCPPhase,
|
||||
struct xNetworkEndPoint * pxEndPoint,
|
||||
IP_Address_t * pxIPAddress )
|
||||
{
|
||||
(void)eDHCPPhase;
|
||||
(void)pxEndPoint;
|
||||
(void)pxIPAddress;
|
||||
|
||||
/* Provide a stub for this function. */
|
||||
return eDHCPContinue;
|
||||
}
|
||||
|
||||
const char * pcApplicationHostnameHook( void )
|
||||
{
|
||||
/* This function will be called during the DHCP: the machine will be registered
|
||||
* with an IP address plus this name. */
|
||||
return "STM32H755ZI-Q-Labor";
|
||||
}
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
static NetworkInterface_t xInterfaces[ 1 ];
|
||||
static NetworkEndPoint_t xEndPoints[ 1 ];
|
||||
|
||||
extern NetworkInterface_t * pxSTM32_FillInterfaceDescriptor( BaseType_t xEMACIndex,
|
||||
NetworkInterface_t * pxInterface );
|
||||
extern NetworkInterface_t * pxLoopback_FillInterfaceDescriptor( BaseType_t xEMACIndex,
|
||||
NetworkInterface_t * pxInterface );
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* USER CODE BEGIN Boot_Mode_Sequence_1 */
|
||||
/*HW semaphore Clock enable*/
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
/* Activate HSEM notification for Cortex-M4*/
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
/*
|
||||
Domain D2 goes to STOP mode (Cortex-M4 in deep-sleep) waiting for Cortex-M7 to
|
||||
perform system initialization (system clock config, external memory configuration.. )
|
||||
*/
|
||||
HAL_PWREx_ClearPendingEvent();
|
||||
HAL_PWREx_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFE, PWR_D2_DOMAIN);
|
||||
/* Clear HSEM flag */
|
||||
__HAL_HSEM_CLEAR_FLAG(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
|
||||
/* USER CODE END Boot_Mode_Sequence_1 */
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
pxSTM32_FillInterfaceDescriptor(
|
||||
1,
|
||||
&( xInterfaces[ 0 ] )
|
||||
);
|
||||
|
||||
/* Attach an endpoint to that interface. */
|
||||
uint32_t ip4gen = uuid_to_ipv4_lla(0);
|
||||
const uint8_t ucIPAddress[ ipIP_ADDRESS_LENGTH_BYTES ] = { ( ip4gen >> 24 ) & 0xFF,
|
||||
( ip4gen >> 16 ) & 0xFF, ( ip4gen >> 8 ) & 0xFF, ( ip4gen >> 0 ) & 0xFF };
|
||||
const uint8_t ucNetMask[ ipIP_ADDRESS_LENGTH_BYTES ] = { 255, 255, 0, 0 };
|
||||
const uint8_t ucGatewayAddress[ ipIP_ADDRESS_LENGTH_BYTES ] = { 169, 254, 0, 1 };
|
||||
const uint8_t ucDNSServerAddress[ ipIP_ADDRESS_LENGTH_BYTES ] = { 1, 1, 1, 1 };
|
||||
uint8_t ucMACAddress[ ipMAC_ADDRESS_LENGTH_BYTES ] = { 0 };
|
||||
uuid_to_mac(ucMACAddress, 0);
|
||||
|
||||
/* Attach an endpoint to that interface. */
|
||||
FreeRTOS_FillEndPoint(
|
||||
&( xInterfaces[ 0 ] ),
|
||||
&( xEndPoints[ 0 ] ),
|
||||
ucIPAddress,
|
||||
ucNetMask,
|
||||
ucGatewayAddress,
|
||||
ucDNSServerAddress,
|
||||
ucMACAddress
|
||||
);
|
||||
|
||||
//switch off dhcp and directly use LLA address determined by the UUID
|
||||
xEndPoints[ 0 ].bits.bWantDHCP = 0;
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_ETH_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
IPC_ETH_CONSUMER_Init("eth_endpoint");
|
||||
|
||||
initialise_stdlib_abstraction();
|
||||
|
||||
FreeRTOS_IPInit_Multi();
|
||||
|
||||
vTaskStartScheduler();
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ETH Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_ETH_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ETH_Init 0 */
|
||||
#if 0
|
||||
/* USER CODE END ETH_Init 0 */
|
||||
|
||||
static uint8_t MACAddr[6];
|
||||
|
||||
/* USER CODE BEGIN ETH_Init 1 */
|
||||
|
||||
/* USER CODE END ETH_Init 1 */
|
||||
heth.Instance = ETH;
|
||||
MACAddr[0] = 0x00;
|
||||
MACAddr[1] = 0x80;
|
||||
MACAddr[2] = 0xE1;
|
||||
MACAddr[3] = 0x00;
|
||||
MACAddr[4] = 0x00;
|
||||
MACAddr[5] = 0x00;
|
||||
heth.Init.MACAddr = &MACAddr[0];
|
||||
heth.Init.MediaInterface = HAL_ETH_RMII_MODE;
|
||||
heth.Init.TxDesc = DMATxDscrTab;
|
||||
heth.Init.RxDesc = DMARxDscrTab;
|
||||
heth.Init.RxBuffLen = 1536;
|
||||
|
||||
/* USER CODE BEGIN MACADDRESS */
|
||||
|
||||
/* USER CODE END MACADDRESS */
|
||||
|
||||
if (HAL_ETH_Init(&heth) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig));
|
||||
TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD;
|
||||
TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC;
|
||||
TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT;
|
||||
/* USER CODE BEGIN ETH_Init 2 */
|
||||
#endif
|
||||
/* USER CODE END ETH_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@@ -0,0 +1,869 @@
|
||||
/**
|
||||
* \file mvsyscall.c
|
||||
* \brief Wrappers required to use newlib malloc-family within FreeRTOS.
|
||||
* The syscalls for stdlib are implemented in a minimum way as well
|
||||
*
|
||||
* \par Overview
|
||||
* Route FreeRTOS memory management functions to newlib's malloc family.
|
||||
* Thus newlib and FreeRTOS share memory-management routines and memory pool,
|
||||
* and all newlib's internal memory-management requirements are supported.
|
||||
*
|
||||
* \author Dave Nadler
|
||||
* \author Thorsten Kimmel
|
||||
* \date 20-August-2019
|
||||
* \version 02-Dec-2021 implemented syscalls for stdlib
|
||||
* \version 27-Jun-2020 Correct "FreeRTOS.h" capitalization, commentary
|
||||
* \version 24-Jun-2020 commentary only
|
||||
* \version 11-Sep-2019 malloc accounting, comments, newlib version check
|
||||
*
|
||||
* \see http://www.nadler.com/embedded/newlibAndFreeRTOS.html
|
||||
* \see https://sourceware.org/newlib/libc.html#Reentrancy
|
||||
* \see https://sourceware.org/newlib/libc.html#malloc
|
||||
* \see https://sourceware.org/newlib/libc.html#index-_005f_005fenv_005flock
|
||||
* \see https://sourceware.org/newlib/libc.html#index-_005f_005fmalloc_005flock
|
||||
* \see https://sourceforge.net/p/freertos/feature-requests/72/
|
||||
* \see http://www.billgatliff.com/newlib.html
|
||||
* \see http://wiki.osdev.org/Porting_Newlib
|
||||
* \see http://www.embecosm.com/appnotes/ean9/ean9-howto-newlib-1.0.html
|
||||
*
|
||||
*
|
||||
* \copyright
|
||||
* (c) Dave Nadler 2017-2020, All Rights Reserved.
|
||||
* Web: http://www.nadler.com
|
||||
* email: drn@nadler.com
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Use or redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions, and the following disclaimer.
|
||||
*
|
||||
* - Use or redistributions of source code must retain ALL ORIGINAL COMMENTS, AND
|
||||
* ANY CHANGES MUST BE DOCUMENTED, INCLUDING:
|
||||
* - Reason for change (purpose)
|
||||
* - Functional change
|
||||
* - Date and author contact
|
||||
*
|
||||
* - Redistributions in binary form must reproduce the above copyright notice, this
|
||||
* list of conditions and the following disclaimer in the documentation and/or
|
||||
* other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*!
|
||||
* Includes
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <unistd.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
#include <newlib.h>
|
||||
#include <malloc.h>
|
||||
#include <FreeRTOS.h>
|
||||
|
||||
/*!
|
||||
* In case there is a FreeRTOS used for this application, we have to include
|
||||
* additional dependencies which are used in memory wrappers
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#ifdef INC_FREERTOS_H
|
||||
# include "task.h"
|
||||
# include "semphr.h"
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* conditional check to make sure this syscall abstraction and the memory
|
||||
* wrapper fits to the correct newlib / stdlib version
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#if (( __NEWLIB__ != 3) && ( __NEWLIB__ != 4 )) || ((__NEWLIB__ != 3) && (__NEWLIB_MINOR__ < 1)) || \
|
||||
((__NEWLIB__ == 3) && (__NEWLIB_MINOR__ > 3) )
|
||||
#warning "This wrapper was verified for newlib versions 3.1 - 3.3; please ensure newlib's external requirements for malloc-family are unchanged!"
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* conditional check to make sure the correct reentrancy configuration has been
|
||||
* set. Otherwise the stdlib calls could be lead to undefined behavior whenever
|
||||
* a function is called simultaneous by more than one thread
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#ifdef INC_FREERTOS_H
|
||||
# if !defined(configUSE_NEWLIB_REENTRANT) || (configUSE_NEWLIB_REENTRANT != 1)
|
||||
# error "#define configUSE_NEWLIB_REENTRANT 1 which is required for thread-safety of newlib sprintf, dtoa, strtok, etc..."
|
||||
# endif
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef INC_FREERTOS_H
|
||||
// ----------------------------------------------------------------------------
|
||||
// The following functions are used to lock IRQs to make sure the newlib functions
|
||||
// can be used in an IRQ as well, this is not working as expected and so we disable it
|
||||
// for our platform so far, therefore we have to make sure the user can not enter newlib
|
||||
// functions when running in ISR context
|
||||
//! Disables interrupts (after saving prior state)
|
||||
# define NEWLIB_FUNCS_INSIDE_ISR 0
|
||||
# if defined(NEWLIB_FUNCS_INSIDE_ISR) && NEWLIB_FUNCS_INSIDE_ISR != 0
|
||||
define DRN_ENTER_CRITICAL_SECTION(_usis) { _usis = taskENTER_CRITICAL_FROM_ISR(); }
|
||||
# else
|
||||
# define DRN_ENTER_CRITICAL_SECTION(_usis) do { int insideAnISR = xPortIsInsideInterrupt(); configASSERT( !insideAnISR ); } while(0)
|
||||
# endif
|
||||
|
||||
//! Re-enables interrupts (unless already disabled prior taskENTER_CRITICAL)
|
||||
# if defined(NEWLIB_FUNCS_INSIDE_ISR) && NEWLIB_FUNCS_INSIDE_ISR != 0
|
||||
# define DRN_EXIT_CRITICAL_SECTION(_usis) { taskEXIT_CRITICAL_FROM_ISR(_usis); }
|
||||
# else
|
||||
# define DRN_EXIT_CRITICAL_SECTION(_usis)
|
||||
# endif
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
# define __HeapBase _end
|
||||
# define __HeapLimit _estack
|
||||
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV
|
||||
|
||||
/*!
|
||||
* The symbols __HeapBase and __HeapLimit are defined to read the
|
||||
* heap parameters from symbols defined in the linker script. The
|
||||
* define macros above are used to adapt these names to the name
|
||||
* of the variable in the linker script. Both variables will be used
|
||||
* later to allocate and manage memory of the heap and to detect a
|
||||
* stack / heap crash...
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
extern char __HeapBase, __HeapLimit;
|
||||
|
||||
int _write( int file, char* ptr, int len );
|
||||
int _read( int file, char* ptr, int len );
|
||||
|
||||
/*!
|
||||
* The following semaphore is used to prevent the stdout and stderr device
|
||||
* to be accessed simultaneous while writing data. This is necessary because
|
||||
* the stdlib itself is thread safe and has its own buffers for a thread but
|
||||
* the access to the hardware must be locked as well
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
static char memAlignmentAndSafetyBuffer[32] = {0};
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
static SemaphoreHandle_t stdioSemaphore;
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
static SemaphoreHandle_t mallocSemaphore;
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
static SemaphoreHandle_t envSemaphore;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
/*!
|
||||
* pointer to array of char* strings that define the current
|
||||
* environment variables of the applications environment
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#define xstr(a) str(a)
|
||||
#define str(a) #a
|
||||
#define NEWLIB_ENV "STDLIB=newlib-" xstr(__NEWLIB__) "." xstr(__NEWLIB_MINOR__)
|
||||
#ifdef NDEBUG
|
||||
# define DEBUG_ENV "DEBUG_ENV=RELEASE"
|
||||
#else
|
||||
# define DEBUG_ENV "DEBUG_ENV=DEBUG"
|
||||
#endif
|
||||
#define GNUC_ENV "GNUC=" xstr(__GNUC__) "." xstr(__GNUC_MINOR__)
|
||||
#define OS_VERSION_ENV "OSVERSION=" xstr(tskKERNEL_VERSION_MAJOR) "." xstr(tskKERNEL_VERSION_MINOR)
|
||||
static char* __env[] = { "ARCH=ARM32", "MCU=STM32F746ZI", "PLATFORM=ARM_FW_PLAYGROUND", "OS=FreeRTOS", "USERNAME=STM32",
|
||||
NEWLIB_ENV, OS_VERSION_ENV, GNUC_ENV, DEBUG_ENV, "BUILDTIME=" xstr(__TIME__), "BUILDDATE=" xstr(__DATE__),
|
||||
NULL
|
||||
};
|
||||
char** environ = &__env[0];
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable stdout channel which can be used
|
||||
* for debugging purposes in the application
|
||||
* \param chr
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __stdout_put_char( int chr );
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable stdin channel which can be used
|
||||
* for debugging purposes in the application
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) int __stdin_get_char( void )
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable clock tick function which is used
|
||||
* by the stdlib
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) unsigned long long __stdlib_get_system_clock_ticks( void )
|
||||
{
|
||||
#if defined(INC_FREERTOS_H)
|
||||
return (unsigned long long)xTaskGetTickCount();
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief semihosting initialization function which should be called when _start
|
||||
* is called. afterwards main would be called.
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
void initialise_monitor_handles( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
memAlignmentAndSafetyBuffer[0] = 1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief this function will be called after initialization of the .bss, .text,
|
||||
* and .data segment of the application and while the stdlib begins to initialize
|
||||
* its requirements. This is done by calling the __libc_init_array in _start.S routine
|
||||
* before calling the main function. By tagging a function with the "constructor"
|
||||
* attribute, the compiler will add the function pointer to this initialization list.
|
||||
* \attention This is a GCC attribute. In case the application is compiled with another
|
||||
* compiler, this attribute must be ported as well!
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__((constructor))
|
||||
void initialise_stdlib_abstraction( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
initialise_monitor_handles();
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
stdioSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( stdioSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
mallocSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( mallocSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
envSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( envSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief returns the process ID (PID) of the calling process.
|
||||
* \attention we have no real OS and so we only return PID 1 because
|
||||
* this is the only running process. Everything is in "kernel space" or
|
||||
* "machine mode"
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _getpid( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief The command kill sends the specified signal to the specified
|
||||
* process.
|
||||
* \attention we have no real OS and so we cannot kill our only running
|
||||
* process with PID 1
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _kill( int pid, int sig )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )pid;
|
||||
( void )sig;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EINVAL;
|
||||
}
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief The command exit is used to stop the process or application
|
||||
* \attention if the application has called exit, we do must not return
|
||||
* from this function anymore
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( noreturn ) )
|
||||
void _exit ( int status )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
_kill( status, -1 );
|
||||
while ( 1 ) {}
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to read up to 'len' bytes from file descriptor 'file'
|
||||
* into the buffer starting at 'ptr'.
|
||||
* \note currently there is only support for stdin. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _read( int file, char* ptr, int len )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
int DataIdx;
|
||||
int resLen = 0;
|
||||
|
||||
if ( file == STDIN_FILENO )
|
||||
{
|
||||
for ( DataIdx = 0; DataIdx < len; )
|
||||
{
|
||||
int result = __stdin_get_char();
|
||||
if ( result == EOF )
|
||||
{
|
||||
if ( resLen == 0 )
|
||||
{
|
||||
resLen = EOF;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
*ptr++ = ( char )result;
|
||||
resLen++;
|
||||
DataIdx++;
|
||||
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EBADF;
|
||||
}
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
|
||||
return resLen;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to write 'len' bytes from file descriptor 'file'
|
||||
* out of the buffer starting at 'ptr'.
|
||||
* \note currently there is only support for stdout and stderr. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _write( int file, char* ptr, int len )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
int DataIdx, locked = 0;
|
||||
|
||||
if ( file == STDOUT_FILENO || file == STDERR_FILENO )
|
||||
{
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( stdioSemaphore, -1 );
|
||||
locked = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
if (file == STDERR_FILENO)
|
||||
{
|
||||
__stdout_put_char('\033');
|
||||
__stdout_put_char('[');
|
||||
__stdout_put_char('3');
|
||||
__stdout_put_char('1');
|
||||
__stdout_put_char('m');
|
||||
}
|
||||
for ( DataIdx = 0; DataIdx < len; DataIdx++ )
|
||||
{
|
||||
__stdout_put_char( ptr[DataIdx] );
|
||||
}
|
||||
if (file == STDERR_FILENO)
|
||||
{
|
||||
__stdout_put_char('\033');
|
||||
__stdout_put_char('[');
|
||||
__stdout_put_char('0');
|
||||
__stdout_put_char('m');
|
||||
}
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
if ( locked )
|
||||
{
|
||||
xSemaphoreGiveRecursive( stdioSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
return len;
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EBADF;
|
||||
}
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to close a descriptor.
|
||||
* \note currently there is no support for this function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _close( int file )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief These function returns information about a file, in the buffer
|
||||
* pointed to by stat
|
||||
* \note currently there is only support for stdin/out/err function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _fstat( int file, struct stat* st )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
st->st_dev = file;
|
||||
st->st_size = 0;
|
||||
st->st_blocks = 0;
|
||||
|
||||
if ( file >= 1 && file <= 3 )
|
||||
{
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
else
|
||||
{
|
||||
st->st_mode = S_IFREG;
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* \brief checks wether a descriptor 'file' is a TTY device or not
|
||||
* \note currently there is only support for stdin/out/err function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _isatty( int file )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
// is stdin, stdout or stderror
|
||||
if ( file >= 0 && file <= 2 )
|
||||
{
|
||||
return file;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _lseek( int file, int ptr, int dir )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
( void )ptr;
|
||||
( void )dir;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _open( char* path, int flags, ... )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )path;
|
||||
( void )flags;
|
||||
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _wait( int* status )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )status;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ECHILD;
|
||||
}
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _unlink( char* name )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )name;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOENT;
|
||||
}
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _times( struct tms* buf )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
buf->tms_utime = buf->tms_cutime = 0; // we have no user space!
|
||||
buf->tms_stime = buf->tms_cstime = __stdlib_get_system_clock_ticks( ); // everything runs in one process!
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _stat( char* file, struct stat* st )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
( void )st;
|
||||
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _link( char* old, char* new )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )old;
|
||||
( void )new;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EMLINK;
|
||||
}
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _fork( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EAGAIN;
|
||||
}
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _execve( char* name, char** argv, char** env )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )env;
|
||||
( void )name;
|
||||
( void )argv;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOMEM;
|
||||
}
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ================================================================================================
|
||||
// External routines required by newlib's malloc (sbrk/_sbrk, __malloc_lock/unlock)
|
||||
// ================================================================================================
|
||||
|
||||
#if !defined(INC_FREERTOS_H)
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
caddr_t _sbrk( int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
register char* stack_ptr asm( "sp" );
|
||||
|
||||
extern char end asm( "end" );
|
||||
static char* heap_end;
|
||||
char* prev_heap_end;
|
||||
|
||||
if ( heap_end == 0 )
|
||||
{
|
||||
heap_end = &end;
|
||||
}
|
||||
|
||||
prev_heap_end = heap_end;
|
||||
if ( heap_end + incr > stack_ptr )
|
||||
{
|
||||
// write(1, "Heap and stack collision\n", 25);
|
||||
// abort();
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOMEM;
|
||||
}
|
||||
errno = ENOMEM;
|
||||
return ( caddr_t ) -1;
|
||||
}
|
||||
|
||||
heap_end += incr;
|
||||
|
||||
return ( caddr_t ) prev_heap_end;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
static int heapBytesRemaining;
|
||||
static unsigned int stickyHeapBytesRemaining;
|
||||
uint32_t TotalHeapSize;
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
static UBaseType_t malLock_uxSavedInterruptStatus;
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void* _sbrk_r( struct _reent* pReent, int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )malLock_uxSavedInterruptStatus;
|
||||
( void )pReent;
|
||||
( void )incr;
|
||||
register char* stack_ptr asm( "sp" );
|
||||
|
||||
// make sure to calculate the correct heap size and bytes remaining at the first call!
|
||||
if( TotalHeapSize == 0 )
|
||||
{
|
||||
TotalHeapSize = heapBytesRemaining = stickyHeapBytesRemaining
|
||||
= ( int )( ( &__HeapLimit ) - ( &__HeapBase ) )
|
||||
#ifdef configISR_STACK_SIZE_WORDS
|
||||
- ( configISR_STACK_SIZE_WORDS * 4 )
|
||||
#endif
|
||||
;
|
||||
};
|
||||
static char* currentHeapEnd = &__HeapBase;
|
||||
char* limit = ( xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED ) ?
|
||||
stack_ptr : // Before scheduler is started, limit is stack pointer (risky!)
|
||||
&__HeapLimit
|
||||
#ifdef configISR_STACK_SIZE_WORDS
|
||||
- ( configISR_STACK_SIZE_WORDS * 4 )
|
||||
#endif
|
||||
; // Once running, OK to reuse all remaining RAM except ISR stack (MSP) stack
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
if ( currentHeapEnd + incr > limit )
|
||||
{
|
||||
// Ooops, no more memory available...
|
||||
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
|
||||
{
|
||||
extern void vApplicationMallocFailedHook( void );
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
vApplicationMallocFailedHook();
|
||||
}
|
||||
#elif defined(configHARD_STOP_ON_MALLOC_FAILURE)
|
||||
// If you want to alert debugger or halt...
|
||||
// WARNING: brkpt instruction may prevent watchdog operation...
|
||||
while( 1 )
|
||||
{
|
||||
__asm( "bkpt #0" );
|
||||
}; // Stop in GUI as if at a breakpoint (if debugging, otherwise loop forever)
|
||||
#else
|
||||
// Default, if you prefer to believe your application will gracefully trap out-of-memory...
|
||||
pReent->_errno = ENOMEM; // newlib's thread-specific errno
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
#endif
|
||||
return ( char* ) -1; // the malloc-family routine that called sbrk will return 0
|
||||
}
|
||||
|
||||
char* previousHeapEnd = currentHeapEnd;
|
||||
currentHeapEnd += incr;
|
||||
heapBytesRemaining -= incr;
|
||||
|
||||
// implement the statistical feature to provide the minimum free heap size feature
|
||||
// of FreeRTOS statistics
|
||||
if ( stickyHeapBytesRemaining > xPortGetFreeHeapSize() )
|
||||
{
|
||||
stickyHeapBytesRemaining = xPortGetFreeHeapSize();
|
||||
}
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
return ( char* ) previousHeapEnd;
|
||||
}
|
||||
|
||||
/*! \brief non-reentrant sbrk uses is actually reentrant by using current context
|
||||
* because the current _reent structure is pointed to by global _impure_ptr
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
void* sbrk( ptrdiff_t __incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return _sbrk_r( _impure_ptr, __incr );
|
||||
}
|
||||
|
||||
//! _sbrk is a synonym for sbrk.
|
||||
// ----------------------------------------------------------------------------
|
||||
char* _sbrk( int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return sbrk( incr );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __malloc_lock( struct _reent* r )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )r;
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( mallocSemaphore, -1 );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __malloc_unlock( struct _reent* r )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )r;
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreGiveRecursive( mallocSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __env_lock( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( envSemaphore, -1 );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __env_unlock( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreGiveRecursive( envSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void* pvPortMalloc( size_t xSize )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
void* p = malloc( xSize );
|
||||
return p;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void vPortFree( void* pv )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
free( pv );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
size_t xPortGetFreeHeapSize( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
static int lockGuard = 0;
|
||||
if ( lockGuard != 0 ) return stickyHeapBytesRemaining;
|
||||
lockGuard = 1;
|
||||
struct mallinfo mi = mallinfo();
|
||||
size_t result = mi.fordblks + heapBytesRemaining;
|
||||
lockGuard = 0;
|
||||
return result;
|
||||
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
size_t xPortGetMinimumEverFreeHeapSize ( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return stickyHeapBytesRemaining;
|
||||
}
|
||||
|
||||
//! No implementation needed, but stub provided in case application already calls vPortInitialiseBlocks
|
||||
// ----------------------------------------------------------------------------
|
||||
void vPortInitialiseBlocks( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,207 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* Peripheral interrupt init */
|
||||
/* CM7_SEV_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(CM7_SEV_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(CM7_SEV_IRQn);
|
||||
/* HSEM2_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(HSEM2_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(HSEM2_IRQn);
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ETH MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param heth: ETH handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(heth->Instance==ETH)
|
||||
{
|
||||
/* USER CODE BEGIN ETH_MspInit 0 */
|
||||
|
||||
/* USER CODE END ETH_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_ETH1MAC_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
/**ETH GPIO Configuration
|
||||
PC1 ------> ETH_MDC
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA2 ------> ETH_MDIO
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
PB13 ------> ETH_TXD1
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG13 ------> ETH_TXD0
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/* ETH interrupt Init */
|
||||
HAL_NVIC_SetPriority(ETH_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(ETH_IRQn);
|
||||
/* USER CODE BEGIN ETH_MspInit 1 */
|
||||
|
||||
/* USER CODE END ETH_MspInit 1 */
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ETH MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param heth: ETH handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
|
||||
{
|
||||
if(heth->Instance==ETH)
|
||||
{
|
||||
/* USER CODE BEGIN ETH_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ETH_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ETH1MAC_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_DISABLE();
|
||||
|
||||
/**ETH GPIO Configuration
|
||||
PC1 ------> ETH_MDC
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA2 ------> ETH_MDIO
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
PB13 ------> ETH_TXD1
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG13 ------> ETH_TXD0
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11|GPIO_PIN_13);
|
||||
|
||||
/* ETH interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(ETH_IRQn);
|
||||
/* USER CODE BEGIN ETH_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ETH_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,259 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32h7xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern ETH_HandleTypeDef heth;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
#if 0
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
#endif
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
}
|
||||
#if 0
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
#endif
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
extern void xPortSysTickHandler( void );
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
xPortSysTickHandler();
|
||||
}
|
||||
#if 0
|
||||
// mask out the ETH_IRQ_Handler completely because it is provided
|
||||
// by the free rtos tcp ip stack template in NetworkInterface.c
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32H7xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32h7xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles Ethernet global interrupt.
|
||||
*/
|
||||
void ETH_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN ETH_IRQn 0 */
|
||||
|
||||
/* USER CODE END ETH_IRQn 0 */
|
||||
HAL_ETH_IRQHandler(&heth);
|
||||
/* USER CODE BEGIN ETH_IRQn 1 */
|
||||
|
||||
/* USER CODE END ETH_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CM7 send event interrupt for CM4.
|
||||
*/
|
||||
void CM7_SEV_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CM7_SEV_IRQn 0 */
|
||||
#endif
|
||||
void CM7_SEV_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE END CM7_SEV_IRQn 0 */
|
||||
/* USER CODE BEGIN CM7_SEV_IRQn 1 */
|
||||
|
||||
/* USER CODE END CM7_SEV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles HSEM2 global interrupt.
|
||||
*/
|
||||
void HSEM2_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HSEM2_IRQn 0 */
|
||||
|
||||
/* USER CODE END HSEM2_IRQn 0 */
|
||||
HAL_HSEM_IRQHandler();
|
||||
/* USER CODE BEGIN HSEM2_IRQn 1 */
|
||||
|
||||
/* USER CODE END HSEM2_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,176 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file syscalls.c
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE Minimal System calls file
|
||||
*
|
||||
* For more information about which c-functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib libc-manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020-2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
|
||||
|
||||
/* Variables */
|
||||
extern int __io_putchar(int ch) __attribute__((weak));
|
||||
extern int __io_getchar(void) __attribute__((weak));
|
||||
|
||||
|
||||
char *__env[1] = { 0 };
|
||||
char **environ = __env;
|
||||
|
||||
|
||||
/* Functions */
|
||||
void initialise_monitor_handles()
|
||||
{
|
||||
}
|
||||
|
||||
int _getpid(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _kill(int pid, int sig)
|
||||
{
|
||||
(void)pid;
|
||||
(void)sig;
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
void _exit (int status)
|
||||
{
|
||||
_kill(status, -1);
|
||||
while (1) {} /* Make sure we hang here */
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _read(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
*ptr++ = __io_getchar();
|
||||
}
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _write(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
__io_putchar(*ptr++);
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
(void)file;
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
(void)file;
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
(void)file;
|
||||
(void)ptr;
|
||||
(void)dir;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _open(char *path, int flags, ...)
|
||||
{
|
||||
(void)path;
|
||||
(void)flags;
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _wait(int *status)
|
||||
{
|
||||
(void)status;
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _unlink(char *name)
|
||||
{
|
||||
(void)name;
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _times(struct tms *buf)
|
||||
{
|
||||
(void)buf;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _stat(char *file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _link(char *old, char *new)
|
||||
{
|
||||
(void)old;
|
||||
(void)new;
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fork(void)
|
||||
{
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _execve(char *name, char **argv, char **env)
|
||||
{
|
||||
(void)name;
|
||||
(void)argv;
|
||||
(void)env;
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
@@ -0,0 +1,79 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sysmem.c
|
||||
* @author Generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE System Memory calls file
|
||||
*
|
||||
* For more information about which C functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the newlib libc manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <errno.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/**
|
||||
* Pointer to the current high watermark of the heap usage
|
||||
*/
|
||||
static uint8_t *__sbrk_heap_end = NULL;
|
||||
|
||||
/**
|
||||
* @brief _sbrk() allocates memory to the newlib heap and is used by malloc
|
||||
* and others from the C library
|
||||
*
|
||||
* @verbatim
|
||||
* ############################################################################
|
||||
* # .data # .bss # newlib heap # MSP stack #
|
||||
* # # # # Reserved by _Min_Stack_Size #
|
||||
* ############################################################################
|
||||
* ^-- RAM start ^-- _end _estack, RAM end --^
|
||||
* @endverbatim
|
||||
*
|
||||
* This implementation starts allocating at the '_end' linker symbol
|
||||
* The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
|
||||
* The implementation considers '_estack' linker symbol to be RAM end
|
||||
* NOTE: If the MSP stack, at any point during execution, grows larger than the
|
||||
* reserved size, please increase the '_Min_Stack_Size'.
|
||||
*
|
||||
* @param incr Memory size
|
||||
* @return Pointer to allocated memory
|
||||
*/
|
||||
void *_sbrk(ptrdiff_t incr)
|
||||
{
|
||||
extern uint8_t _end; /* Symbol defined in the linker script */
|
||||
extern uint8_t _estack; /* Symbol defined in the linker script */
|
||||
extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
|
||||
const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
|
||||
const uint8_t *max_heap = (uint8_t *)stack_limit;
|
||||
uint8_t *prev_heap_end;
|
||||
|
||||
/* Initialize heap end at first call */
|
||||
if (NULL == __sbrk_heap_end)
|
||||
{
|
||||
__sbrk_heap_end = &_end;
|
||||
}
|
||||
|
||||
/* Protect heap from growing into the reserved MSP stack */
|
||||
if (__sbrk_heap_end + incr > max_heap)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return (void *)-1;
|
||||
}
|
||||
|
||||
prev_heap_end = __sbrk_heap_end;
|
||||
__sbrk_heap_end += incr;
|
||||
|
||||
return (void *)prev_heap_end;
|
||||
}
|
||||
@@ -0,0 +1,768 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32h755xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32H755xx Devices vector table for GCC based toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m7
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog Interrupt ( wwdg1_it, wwdg2_it) */
|
||||
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
|
||||
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
|
||||
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
|
||||
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
|
||||
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
|
||||
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word 0 /* Reserved */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FMC_IRQHandler /* FMC */
|
||||
.word SDMMC1_IRQHandler /* SDMMC1 */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt */
|
||||
.word CM7_SEV_IRQHandler /* CM7 Send event interrupt for CM4 */
|
||||
.word CM4_SEV_IRQHandler /* CM4 Send event interrupt for CM7 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word CRYP_IRQHandler /* Crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
.word UART7_IRQHandler /* UART7 */
|
||||
.word UART8_IRQHandler /* UART8 */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
.word SPI5_IRQHandler /* SPI5 */
|
||||
.word SPI6_IRQHandler /* SPI6 */
|
||||
.word SAI1_IRQHandler /* SAI1 */
|
||||
.word LTDC_IRQHandler /* LTDC */
|
||||
.word LTDC_ER_IRQHandler /* LTDC error */
|
||||
.word DMA2D_IRQHandler /* DMA2D */
|
||||
.word SAI2_IRQHandler /* SAI2 */
|
||||
.word QUADSPI_IRQHandler /* QUADSPI */
|
||||
.word LPTIM1_IRQHandler /* LPTIM1 */
|
||||
.word CEC_IRQHandler /* HDMI_CEC */
|
||||
.word I2C4_EV_IRQHandler /* I2C4 Event */
|
||||
.word I2C4_ER_IRQHandler /* I2C4 Error */
|
||||
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
|
||||
.word OTG_FS_EP1_OUT_IRQHandler /* USB OTG FS End Point 1 Out */
|
||||
.word OTG_FS_EP1_IN_IRQHandler /* USB OTG FS End Point 1 In */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
|
||||
.word HRTIM1_Master_IRQHandler /* HRTIM Master Timer global Interrupt */
|
||||
.word HRTIM1_TIMA_IRQHandler /* HRTIM Timer A global Interrupt */
|
||||
.word HRTIM1_TIMB_IRQHandler /* HRTIM Timer B global Interrupt */
|
||||
.word HRTIM1_TIMC_IRQHandler /* HRTIM Timer C global Interrupt */
|
||||
.word HRTIM1_TIMD_IRQHandler /* HRTIM Timer D global Interrupt */
|
||||
.word HRTIM1_TIME_IRQHandler /* HRTIM Timer E global Interrupt */
|
||||
.word HRTIM1_FLT_IRQHandler /* HRTIM Fault global Interrupt */
|
||||
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
|
||||
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
|
||||
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
|
||||
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
|
||||
.word SAI3_IRQHandler /* SAI3 global Interrupt */
|
||||
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
|
||||
.word TIM15_IRQHandler /* TIM15 global Interrupt */
|
||||
.word TIM16_IRQHandler /* TIM16 global Interrupt */
|
||||
.word TIM17_IRQHandler /* TIM17 global Interrupt */
|
||||
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
|
||||
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
|
||||
.word JPEG_IRQHandler /* JPEG global Interrupt */
|
||||
.word MDMA_IRQHandler /* MDMA global Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
|
||||
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
|
||||
.word HSEM2_IRQHandler /* HSEM1 global Interrupt */
|
||||
.word ADC3_IRQHandler /* ADC3 global Interrupt */
|
||||
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
|
||||
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
|
||||
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
|
||||
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
|
||||
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
|
||||
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
|
||||
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
|
||||
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
|
||||
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
|
||||
.word COMP1_IRQHandler /* COMP1 global Interrupt */
|
||||
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
|
||||
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
|
||||
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
|
||||
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
|
||||
.word LPUART1_IRQHandler /* LP UART1 interrupt */
|
||||
.word WWDG_RST_IRQHandler /* Window Watchdog reset interrupt (exti_d2_wwdg_it, exti_d1_wwdg_it) */
|
||||
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
|
||||
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
|
||||
.word SAI4_IRQHandler /* SAI4 global interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word HOLD_CORE_IRQHandler /* Hold core interrupt */
|
||||
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
|
||||
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_AVD_IRQHandler
|
||||
.thumb_set PVD_AVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT0_IRQHandler
|
||||
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT0_IRQHandler
|
||||
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT1_IRQHandler
|
||||
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT1_IRQHandler
|
||||
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FMC_IRQHandler
|
||||
.thumb_set FMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC1_IRQHandler
|
||||
.thumb_set SDMMC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN_CAL_IRQHandler
|
||||
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
|
||||
|
||||
.weak CM7_SEV_IRQHandler
|
||||
.thumb_set CM7_SEV_IRQHandler,Default_Handler
|
||||
|
||||
.weak CM4_SEV_IRQHandler
|
||||
.thumb_set CM4_SEV_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRYP_IRQHandler
|
||||
.thumb_set CRYP_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART7_IRQHandler
|
||||
.thumb_set UART7_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART8_IRQHandler
|
||||
.thumb_set UART8_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI4_IRQHandler
|
||||
.thumb_set SPI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI5_IRQHandler
|
||||
.thumb_set SPI5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI6_IRQHandler
|
||||
.thumb_set SPI6_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI1_IRQHandler
|
||||
.thumb_set SAI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_IRQHandler
|
||||
.thumb_set LTDC_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_ER_IRQHandler
|
||||
.thumb_set LTDC_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2D_IRQHandler
|
||||
.thumb_set DMA2D_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI2_IRQHandler
|
||||
.thumb_set SAI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak QUADSPI_IRQHandler
|
||||
.thumb_set QUADSPI_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM1_IRQHandler
|
||||
.thumb_set LPTIM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_EV_IRQHandler
|
||||
.thumb_set I2C4_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_ER_IRQHandler
|
||||
.thumb_set I2C4_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPDIF_RX_IRQHandler
|
||||
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_FS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_FS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX1_OVR_IRQHandler
|
||||
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_Master_IRQHandler
|
||||
.thumb_set HRTIM1_Master_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMA_IRQHandler
|
||||
.thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMB_IRQHandler
|
||||
.thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMC_IRQHandler
|
||||
.thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMD_IRQHandler
|
||||
.thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIME_IRQHandler
|
||||
.thumb_set HRTIM1_TIME_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_FLT_IRQHandler
|
||||
.thumb_set HRTIM1_FLT_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT0_IRQHandler
|
||||
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT1_IRQHandler
|
||||
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT2_IRQHandler
|
||||
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT3_IRQHandler
|
||||
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI3_IRQHandler
|
||||
.thumb_set SAI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SWPMI1_IRQHandler
|
||||
.thumb_set SWPMI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM15_IRQHandler
|
||||
.thumb_set TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM16_IRQHandler
|
||||
.thumb_set TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM17_IRQHandler
|
||||
.thumb_set TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_WKUP_IRQHandler
|
||||
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_IRQHandler
|
||||
.thumb_set MDIOS_IRQHandler,Default_Handler
|
||||
|
||||
.weak JPEG_IRQHandler
|
||||
.thumb_set JPEG_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDMA_IRQHandler
|
||||
.thumb_set MDMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC2_IRQHandler
|
||||
.thumb_set SDMMC2_IRQHandler,Default_Handler
|
||||
|
||||
.weak HSEM1_IRQHandler
|
||||
.thumb_set HSEM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak HSEM2_IRQHandler
|
||||
.thumb_set HSEM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX2_OVR_IRQHandler
|
||||
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel0_IRQHandler
|
||||
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel1_IRQHandler
|
||||
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel2_IRQHandler
|
||||
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel3_IRQHandler
|
||||
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel4_IRQHandler
|
||||
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel5_IRQHandler
|
||||
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel6_IRQHandler
|
||||
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel7_IRQHandler
|
||||
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP1_IRQHandler
|
||||
.thumb_set COMP1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM2_IRQHandler
|
||||
.thumb_set LPTIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM3_IRQHandler
|
||||
.thumb_set LPTIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM4_IRQHandler
|
||||
.thumb_set LPTIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM5_IRQHandler
|
||||
.thumb_set LPTIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPUART1_IRQHandler
|
||||
.thumb_set LPUART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak WWDG_RST_IRQHandler
|
||||
.thumb_set WWDG_RST_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRS_IRQHandler
|
||||
.thumb_set CRS_IRQHandler,Default_Handler
|
||||
|
||||
.weak ECC_IRQHandler
|
||||
.thumb_set ECC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI4_IRQHandler
|
||||
.thumb_set SAI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak HOLD_CORE_IRQHandler
|
||||
.thumb_set HOLD_CORE_IRQHandler,Default_Handler
|
||||
|
||||
.weak WAKEUP_PIN_IRQHandler
|
||||
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
Whitespace-only changes.
@@ -0,0 +1,198 @@
|
||||
##########################################################################################################################
|
||||
# Author: Thorsten Kimmel
|
||||
# Project: DHBW-Embedded-Systems-TES
|
||||
##########################################################################################################################
|
||||
|
||||
# ------------------------------------------------
|
||||
# Generic Makefile (based on gcc)
|
||||
#
|
||||
# ChangeLog :
|
||||
# 2026-09-25 - first version
|
||||
# ------------------------------------------------
|
||||
|
||||
######################################
|
||||
# target
|
||||
######################################
|
||||
TARGET = Stepper-H7-CM4
|
||||
|
||||
FREERTOS_USE_NETWORK := true
|
||||
MK_CORE := M4
|
||||
LDFLAGS :=
|
||||
CFLAGS :=
|
||||
C_SOURCES :=
|
||||
C_INCLUDES :=
|
||||
ASM_SOURCES :=
|
||||
C_DEFS :=
|
||||
AS_DEFS :=
|
||||
|
||||
# cpu
|
||||
CPU = -mcpu=cortex-m4
|
||||
|
||||
#######################################
|
||||
# additional common includes
|
||||
#######################################
|
||||
include ../common.mk
|
||||
|
||||
|
||||
######################################
|
||||
# building variables
|
||||
######################################
|
||||
# debug build? 1 = -g, 2 = -g3
|
||||
DEBUG = 2
|
||||
# optimization
|
||||
OPT = -O0
|
||||
# stack size limit of single function (warning)
|
||||
SLIMIT = 2048
|
||||
|
||||
#######################################
|
||||
# paths
|
||||
#######################################
|
||||
# Build path
|
||||
BUILD_DIR = build
|
||||
|
||||
######################################
|
||||
# source
|
||||
######################################
|
||||
# C sources
|
||||
C_SOURCES += Core/Src/main.c \
|
||||
Core/Src/newlib_abs.c \
|
||||
Core/Src/stm32h7xx_hal_msp.c \
|
||||
Core/Src/stm32h7xx_it.c \
|
||||
$(wildcard Core/Src/IPC/*.c) \
|
||||
$(wildcard OPENAMP/*.c) \
|
||||
|
||||
|
||||
|
||||
# ASM sources
|
||||
ASM_SOURCES += Core/Startup/startup_stm32h755zitx.s
|
||||
|
||||
|
||||
#######################################
|
||||
# CFLAGS
|
||||
#######################################
|
||||
|
||||
# fpu
|
||||
# NONE for Cortex-M0/M0+/M3
|
||||
|
||||
# float-abi
|
||||
FPU = -mfpu=fpv5-d16
|
||||
FLOAT-ABI = -mfloat-abi=hard
|
||||
|
||||
# mcu
|
||||
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
|
||||
|
||||
# macros for gcc
|
||||
# AS defines
|
||||
AS_DEFS +=
|
||||
|
||||
# C defines
|
||||
C_DEFS += -DCORE_CM4 \
|
||||
-DDEBUG \
|
||||
-DVIRTIO_SLAVE_ONLY
|
||||
|
||||
# AS includes
|
||||
AS_INCLUDES +=
|
||||
|
||||
# C includes
|
||||
C_INCLUDES += -ICore/Inc \
|
||||
-ICore/Inc/IPC \
|
||||
-IOPENAMP
|
||||
|
||||
# compile gcc flags
|
||||
ASFLAGS += $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -fstack-usage -Wstack-usage=$(SLIMIT) -Wno-unused-parameter -Wall -Wextra -Wundef -Wshadow -fno-common -fdata-sections -ffunction-sections
|
||||
|
||||
CFLAGS += $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -fstack-usage -Wstack-usage=$(SLIMIT) -Wno-unused-parameter -Wall -Wextra -Wundef -Wshadow -fno-common -fdata-sections -ffunction-sections
|
||||
|
||||
ifeq ($(DEBUG), 1)
|
||||
CFLAGS += -g -gdwarf-2
|
||||
endif
|
||||
ifeq ($(DEBUG), 2)
|
||||
CFLAGS += -g3 -gdwarf-2
|
||||
endif
|
||||
|
||||
|
||||
ifeq ($(OS),Windows_NT)
|
||||
EXEPOSTFIX = .exe
|
||||
else
|
||||
EXEPOSTFIX =
|
||||
endif
|
||||
|
||||
|
||||
|
||||
#######################################
|
||||
# LDFLAGS
|
||||
#######################################
|
||||
# link script
|
||||
LDSCRIPT = STM32H755ZITX_FLASH.ld
|
||||
|
||||
# libraries
|
||||
LIBS = -lc -lm -lnosys
|
||||
LIBDIR =
|
||||
# -specs=nano.specs
|
||||
LDFLAGS += -lc -lrdimon -u _printf_float -Wa,-adhln -g $(MCU) -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref,--gc-sections
|
||||
|
||||
|
||||
# default action: build all
|
||||
.PHONY: all
|
||||
all: $(BUILD_DIR)/$(TARGET).elf #$(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin $(BUILD_DIR)/$(TARGET).S
|
||||
|
||||
#######################################
|
||||
# build the application
|
||||
#######################################
|
||||
# list of objects
|
||||
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
|
||||
vpath %.c $(sort $(dir $(C_SOURCES)))
|
||||
# list of ASM program objects
|
||||
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
|
||||
vpath %.s $(sort $(dir $(ASM_SOURCES)))
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-CC $<"
|
||||
@$(CC)$(EXEPOSTFIX) -c $(CFLAGS) -MMD -MP -MF"$(@:%.o=%.d)" $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-AS $<"
|
||||
@$(AS)$(EXEPOSTFIX) -c $(CFLAGS) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
|
||||
@echo " $(MK_CORE)-ELF $(BUILD_DIR)/$(TARGET).elf"
|
||||
@$(CC)$(EXEPOSTFIX) $(OBJECTS) $(LDFLAGS) -o $@
|
||||
@$(SZ)$(EXEPOSTFIX) $@
|
||||
|
||||
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
@$(HEX)$(EXEPOSTFIX) $< $@
|
||||
|
||||
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
@$(BIN)$(EXEPOSTFIX) $< $@
|
||||
|
||||
$(BUILD_DIR)/%.S: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
$(OD)$(EXEPOSTFIX) -l -m armv7e-m --disassemble-all $< > $@
|
||||
|
||||
$(BUILD_DIR):
|
||||
mkdir $@
|
||||
|
||||
#######################################
|
||||
# clean up
|
||||
#######################################
|
||||
clean:
|
||||
-rm -fR $(BUILD_DIR)
|
||||
|
||||
|
||||
#######################################
|
||||
# clean up
|
||||
#######################################
|
||||
setup:
|
||||
@echo 'installation only works on linux and on linux subsystem for windows 10'
|
||||
@sudo apt-get update
|
||||
@sudo apt-get install clang clang-tools gcc-multilib g++-multilib build-essential gcc-arm-none-eabi binutils-arm-none-eabi -y
|
||||
|
||||
#######################################
|
||||
# dependencies
|
||||
#######################################
|
||||
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||
|
||||
include ../sca.mk
|
||||
# *** EOF ***
|
||||
Whitespace-only changes.
@@ -0,0 +1,213 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : mbox_hsem.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the mailbox based on hardware semaphore.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "openamp/open_amp.h"
|
||||
#include "stm32h7xx_hal.h"
|
||||
#include "openamp_conf.h"
|
||||
#include "mbox_hsem.h"
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
#define RX_NO_MSG 0
|
||||
#define RX_NEW_MSG 1
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
static uint32_t msg_received = RX_NO_MSG;
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
void HAL_HSEM_FreeCallback(uint32_t SemMask)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN HSEM_FREE_CALLBACK */
|
||||
|
||||
/* USER CODE END HSEM_FREE_CALLBACK */
|
||||
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(SemMask);
|
||||
msg_received = RX_NEW_MSG;
|
||||
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
/* USER CODE END PRE_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_1));
|
||||
|
||||
/* USER CODE BEGIN POST_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
/* USER CODE END POST_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
/* USER CODE END PRE_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
|
||||
/* USER CODE BEGIN POST_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
/* USER CODE END POST_HSEM_FREE_CALLBACK_CM4 */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize MAILBOX with HSEM peripheral
|
||||
* @param None
|
||||
* @retval : Operation result
|
||||
*/
|
||||
int MAILBOX_Init(void)
|
||||
{
|
||||
/* USER CODE BEGIN MAILBOX_INIT */
|
||||
|
||||
/* USER CODE END MAILBOX_INIT */
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_INIT_CM7 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_INIT_CM7 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_1));
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_INIT_CM7 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_INIT_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_INIT_CM4 */
|
||||
|
||||
/* USER CODE END MAILBOX_INIT_CM4 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_INIT_CM4 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_INIT_CM4 */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize MAILBOX with HSEM peripheral
|
||||
* @param virtio device
|
||||
* @retval : Operation result
|
||||
*/
|
||||
int MAILBOX_Poll(struct virtio_device *vdev)
|
||||
{
|
||||
/* If we got an interrupt, ask for the corresponding virtqueue processing */
|
||||
|
||||
if (msg_received == RX_NEW_MSG)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN NEW_MSG */
|
||||
|
||||
/* USER CODE END NEW_MSG */
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_NEW_MSG_CM7 */
|
||||
|
||||
/* USER CODE END PRE_NEW_MSG_CM7 */
|
||||
|
||||
rproc_virtio_notified(vdev, VRING0_ID);
|
||||
|
||||
/* USER CODE BEGIN POST_NEW_MSG_CM7 */
|
||||
|
||||
/* USER CODE END POST_NEW_MSG_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_NEW_MSG_CM4 */
|
||||
|
||||
/* USER CODE END PRE_NEW_MSG_CM4 */
|
||||
|
||||
rproc_virtio_notified(vdev, VRING1_ID);
|
||||
|
||||
/* USER CODE BEGIN POST_NEW_MSG_CM4 */
|
||||
|
||||
/* USER CODE END POST_NEW_MSG_CM4 */
|
||||
#endif
|
||||
msg_received = RX_NO_MSG;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN NO_MSG */
|
||||
|
||||
/* USER CODE END NO_MSG */
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Callback function called by OpenAMP MW to notify message processing
|
||||
* @param VRING id
|
||||
* @retval Operation result
|
||||
*/
|
||||
int MAILBOX_Notify(void *priv, uint32_t id)
|
||||
{
|
||||
(void)priv;
|
||||
(void)id;
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_NOTIFY*/
|
||||
|
||||
/* USER CODE END MAILBOX_NOTIFY */
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_NOTIFY_CM7 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_NOTIFY_CM7 */
|
||||
HAL_HSEM_FastTake(HSEM_ID_0);
|
||||
HAL_HSEM_Release(HSEM_ID_0,0);
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_NOTIFY_CM7 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_NOTIFY_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
HAL_HSEM_FastTake(HSEM_ID_1);
|
||||
HAL_HSEM_Release(HSEM_ID_1,0);
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_NOTIFY_CM4 */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file mabox_hsem.h
|
||||
* @author MCD Application Team
|
||||
* @brief header for mbox_hsem.c module
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef MBOX_HSEM_H_
|
||||
#define MBOX_HSEM_H_
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#define HSEM_ID_0 0 /* CM7 to CM4 Notification */
|
||||
#define HSEM_ID_1 1 /* CM4 to CM7 Notification */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
int MAILBOX_Notify(void *priv, uint32_t id);
|
||||
int MAILBOX_Init(void);
|
||||
int MAILBOX_Poll(struct virtio_device *vdev);
|
||||
|
||||
#endif /* MBOX_HSEM_H_ */
|
||||
@@ -0,0 +1,282 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp.c
|
||||
* @author MCD Application Team
|
||||
* @brief Code for openamp applications
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
#include "openamp.h"
|
||||
#include "rsc_table.h"
|
||||
#include "metal/sys.h"
|
||||
#include "metal/device.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
#define SHM_DEVICE_NAME "STM32_SHM"
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
static struct metal_io_region *shm_io;
|
||||
static struct metal_io_region *rsc_io;
|
||||
static struct shared_resource_table *rsc_table;
|
||||
static struct rpmsg_virtio_shm_pool shpool;
|
||||
static struct rpmsg_virtio_device rvdev;
|
||||
|
||||
static metal_phys_addr_t shm_physmap;
|
||||
|
||||
struct metal_device shm_device = {
|
||||
.name = SHM_DEVICE_NAME,
|
||||
.num_regions = 2,
|
||||
.regions = {
|
||||
{.virt = NULL}, /* shared memory */
|
||||
{.virt = NULL}, /* rsc_table memory */
|
||||
},
|
||||
.node = { NULL },
|
||||
.irq_num = 0,
|
||||
.irq_info = NULL
|
||||
};
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
static int OPENAMP_shmem_init(int RPMsgRole)
|
||||
{
|
||||
int status = 0;
|
||||
struct metal_device *device = NULL;
|
||||
struct metal_init_params metal_params = METAL_INIT_DEFAULTS;
|
||||
void* rsc_tab_addr = NULL;
|
||||
int rsc_size = 0;
|
||||
|
||||
/* USER CODE BEGIN PRE_LIB_METAL_INIT */
|
||||
|
||||
/* USER CODE END PRE_LIB_METAL_INIT */
|
||||
metal_init(&metal_params);
|
||||
|
||||
status = metal_register_generic_device(&shm_device);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = metal_device_open("generic", SHM_DEVICE_NAME, &device);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
shm_physmap = SHM_START_ADDRESS;
|
||||
metal_io_init(&device->regions[0], (void *)SHM_START_ADDRESS, &shm_physmap,
|
||||
SHM_SIZE, -1, 0, NULL);
|
||||
|
||||
/* USER CODE BEGIN PRE_SHM_IO_INIT */
|
||||
|
||||
/* USER CODE END PRE_SHM_IO_INIT */
|
||||
shm_io = metal_device_io_region(device, 0);
|
||||
if (shm_io == NULL) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_SHM_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_SHM_IO_INIT */
|
||||
|
||||
/* Initialize resources table variables */
|
||||
resource_table_init(RPMsgRole, &rsc_tab_addr, &rsc_size);
|
||||
rsc_table = (struct shared_resource_table *)rsc_tab_addr;
|
||||
if (!rsc_table)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_RSC_TABLE_INIT */
|
||||
|
||||
/* USER CODE END POST_RSC_TABLE_INIT */
|
||||
|
||||
metal_io_init(&device->regions[1], rsc_table,
|
||||
(metal_phys_addr_t *)rsc_table, rsc_size, -1U, 0, NULL);
|
||||
|
||||
/* USER CODE BEGIN POST_METAL_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_METAL_IO_INIT */
|
||||
rsc_io = metal_device_io_region(device, 1);
|
||||
if (rsc_io == NULL) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_RSC_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_RSC_IO_INIT */
|
||||
return 0;
|
||||
}
|
||||
|
||||
int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb)
|
||||
{
|
||||
struct fw_rsc_vdev_vring *vring_rsc = NULL;
|
||||
struct virtio_device *vdev = NULL;
|
||||
int status = 0;
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_Init */
|
||||
|
||||
/* USER CODE END MAIL_BOX_Init */
|
||||
|
||||
MAILBOX_Init();
|
||||
|
||||
/* Libmetal Initilalization */
|
||||
status = OPENAMP_shmem_init(RPMsgRole);
|
||||
if(status)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN PRE_VIRTIO_INIT */
|
||||
|
||||
/* USER CODE END PRE_VIRTIO_INIT */
|
||||
vdev = rproc_virtio_create_vdev(RPMsgRole, VDEV_ID, &rsc_table->vdev,
|
||||
rsc_io, NULL, MAILBOX_Notify, NULL);
|
||||
if (vdev == NULL)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
rproc_virtio_wait_remote_ready(vdev);
|
||||
|
||||
/* USER CODE BEGIN POST_VIRTIO_INIT */
|
||||
|
||||
/* USER CODE END POST_VIRTIO_INIT */
|
||||
vring_rsc = &rsc_table->vring0;
|
||||
status = rproc_virtio_init_vring(vdev, 0, vring_rsc->notifyid,
|
||||
(void *)vring_rsc->da, shm_io,
|
||||
vring_rsc->num, vring_rsc->align);
|
||||
if (status != 0)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_VRING0_INIT */
|
||||
|
||||
/* USER CODE END POST_VRING0_INIT */
|
||||
vring_rsc = &rsc_table->vring1;
|
||||
status = rproc_virtio_init_vring(vdev, 1, vring_rsc->notifyid,
|
||||
(void *)vring_rsc->da, shm_io,
|
||||
vring_rsc->num, vring_rsc->align);
|
||||
if (status != 0)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_VRING1_INIT */
|
||||
|
||||
/* USER CODE END POST_VRING1_INIT */
|
||||
|
||||
rpmsg_virtio_init_shm_pool(&shpool, (void *)VRING_BUFF_ADDRESS,
|
||||
(size_t)SHM_SIZE);
|
||||
rpmsg_init_vdev(&rvdev, vdev, ns_bind_cb, shm_io, &shpool);
|
||||
|
||||
/* USER CODE BEGIN POST_RPMSG_INIT */
|
||||
|
||||
/* USER CODE END POST_RPMSG_INIT */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void OPENAMP_DeInit()
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN PRE_OPENAMP_DEINIT */
|
||||
|
||||
/* USER CODE END PRE_OPENAMP_DEINIT */
|
||||
|
||||
rpmsg_deinit_vdev(&rvdev);
|
||||
|
||||
metal_finish();
|
||||
|
||||
/* USER CODE BEGIN POST_OPENAMP_DEINIT */
|
||||
|
||||
/* USER CODE END POST_OPENAMP_DEINIT */
|
||||
}
|
||||
|
||||
void OPENAMP_init_ept(struct rpmsg_endpoint *ept)
|
||||
{
|
||||
/* USER CODE BEGIN PRE_EP_INIT */
|
||||
|
||||
/* USER CODE END PRE_EP_INIT */
|
||||
|
||||
rpmsg_init_ept(ept, "", RPMSG_ADDR_ANY, RPMSG_ADDR_ANY, NULL, NULL);
|
||||
|
||||
/* USER CODE BEGIN POST_EP_INIT */
|
||||
|
||||
/* USER CODE END POST_EP_INIT */
|
||||
}
|
||||
|
||||
int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
|
||||
uint32_t dest, rpmsg_ept_cb cb,
|
||||
rpmsg_ns_unbind_cb unbind_cb)
|
||||
{
|
||||
int ret = 0;
|
||||
/* USER CODE BEGIN PRE_EP_CREATE */
|
||||
|
||||
/* USER CODE END PRE_EP_CREATE */
|
||||
|
||||
ret = rpmsg_create_ept(ept, &rvdev.rdev, name, RPMSG_ADDR_ANY, dest, cb,
|
||||
unbind_cb);
|
||||
|
||||
/* USER CODE BEGIN POST_EP_CREATE */
|
||||
|
||||
/* USER CODE END POST_EP_CREATE */
|
||||
return ret;
|
||||
}
|
||||
|
||||
void OPENAMP_check_for_message(void)
|
||||
{
|
||||
/* USER CODE BEGIN MSG_CHECK */
|
||||
|
||||
/* USER CODE END MSG_CHECK */
|
||||
MAILBOX_Poll(rvdev.vdev);
|
||||
}
|
||||
|
||||
void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept)
|
||||
{
|
||||
/* USER CODE BEGIN EP_READY */
|
||||
|
||||
/* USER CODE END EP_READY */
|
||||
|
||||
while(!is_rpmsg_ept_ready(rp_ept))
|
||||
{
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
MAILBOX_Poll(rvdev.vdev);
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,87 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp.h
|
||||
* @brief Header for openamp applications
|
||||
* @author MCD Application Team
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __openamp_H
|
||||
#define __openamp_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "openamp/open_amp.h"
|
||||
#include "openamp_conf.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#define OPENAMP_send rpmsg_send
|
||||
#define OPENAMP_destroy_ept rpmsg_destroy_ept
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Initialize the openamp framework*/
|
||||
int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb);
|
||||
|
||||
/* Deinitialize the openamp framework*/
|
||||
void OPENAMP_DeInit(void);
|
||||
|
||||
/* Initialize the endpoint struct*/
|
||||
void OPENAMP_init_ept(struct rpmsg_endpoint *ept);
|
||||
|
||||
/* Create and register the endpoint */
|
||||
int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
|
||||
uint32_t dest, rpmsg_ept_cb cb,
|
||||
rpmsg_ns_unbind_cb unbind_cb);
|
||||
|
||||
/* Check for new rpmsg reception */
|
||||
void OPENAMP_check_for_message(void);
|
||||
|
||||
/* Wait loop on endpoint ready ( message dest address is know)*/
|
||||
void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__openamp_H */
|
||||
|
||||
@@ -0,0 +1,247 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief Configuration file for OpenAMP MW
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __OPENAMP_CONF__H__
|
||||
#define __OPENAMP_CONF__H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
|
||||
#include "openamp_log.h"
|
||||
#endif
|
||||
|
||||
/* ########################## Mailbox Interface Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of Mailbox interface to be used in the OpenAMP MW
|
||||
* Please note that not all interfaces are supported by a STM32 device
|
||||
*/
|
||||
//#define MAILBOX_IPCC_IF_ENABLED
|
||||
#define MAILBOX_HSEM_IF_ENABLED
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include Mailbox interface header file
|
||||
*/
|
||||
|
||||
#ifdef MAILBOX_IPCC_IF_ENABLED
|
||||
#include "mbox_ipcc.h"
|
||||
#endif /* MAILBOX_IPCC_IF_ENABLED */
|
||||
|
||||
#ifdef MAILBOX_HSEM_IF_ENABLED
|
||||
#include "mbox_hsem.h"
|
||||
#endif /* MAILBOX_HSEM_IF_ENABLED */
|
||||
|
||||
/* ########################## Virtual Diver Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the OpenAMP Virtual driver module
|
||||
* Please note that virtual driver are not supported on all stm32 families
|
||||
*/
|
||||
//#define VIRTUAL_UART_MODULE_ENABLED
|
||||
//#define VIRTUAL_I2C_MODULE_ENABLED
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include Virtual Driver module's header file
|
||||
*/
|
||||
|
||||
#ifdef VIRTUAL_UART_MODULE_ENABLED
|
||||
#include "virt_uart.h"
|
||||
#endif /* VIRTUAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef VIRTUAL_I2C_MODULE_ENABLED
|
||||
#include "virt_i2c.h"
|
||||
#endif /* VIRTUAL_I2C_MODULE_ENABLED */
|
||||
|
||||
/* ########################## Linux Master Selection ############################## */
|
||||
/**
|
||||
* @brief Due to Linux compatibility, it's important to distinguish if the MASTER is Linux or not.
|
||||
* In that case, the LINUX_RPROC_MASTER define is required
|
||||
*/
|
||||
//#define LINUX_RPROC_MASTER
|
||||
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup OPENAMP_MW
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF OPENAMP_CONF
|
||||
* @brief Configuration file for Openamp mw
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Variables OPENAMP_CONF_Exported_Variables
|
||||
* @brief Public variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Defines OPENAMP_CONF_Exported_Defines
|
||||
* @brief Defines for configuration of the Openamp mw
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (__ICCARM__)
|
||||
/*
|
||||
* For IAR, the .icf file should contain the following lines:
|
||||
* define symbol __OPENAMP_region_start__ = BASE_ADDRESS; (0x38000400 for example)
|
||||
* define symbol __OPENAMP_region_size__ = MEM_SIZE; (0xB000 as example)
|
||||
*
|
||||
* export symbol __OPENAMP_region_start__;
|
||||
* export symbol __OPENAMP_region_size__;
|
||||
*/
|
||||
extern const uint32_t __OPENAMP_region_start__;
|
||||
extern const uint8_t __OPENAMP_region_size__;
|
||||
#define SHM_START_ADDRESS ((metal_phys_addr_t)&__OPENAMP_region_start__)
|
||||
#define SHM_SIZE ((size_t)&__OPENAMP_region_size__)
|
||||
|
||||
#elif defined(__CC_ARM) || defined (__clang__)
|
||||
/*
|
||||
* For MDK-ARM, the scatter file .sct should contain the following line:
|
||||
* LR_IROM1 .... {
|
||||
* ...
|
||||
* __OpenAMP_SHMEM__ 0x38000400 EMPTY 0x0000B000 {} ; Shared Memory area used by OpenAMP
|
||||
* }
|
||||
*
|
||||
*/
|
||||
extern unsigned int Image$$__OpenAMP_SHMEM__$$Base;
|
||||
extern unsigned int Image$$__OpenAMP_SHMEM__$$ZI$$Length;
|
||||
#define SHM_START_ADDRESS (unsigned int)&Image$$__OpenAMP_SHMEM__$$Base
|
||||
#define SHM_SIZE ((size_t)&Image$$__OpenAMP_SHMEM__$$ZI$$Length)
|
||||
|
||||
#else
|
||||
/*
|
||||
* for GCC add the following content to the .ld file:
|
||||
* MEMORY
|
||||
* {
|
||||
* ...
|
||||
* OPEN_AMP_SHMEM (xrw) : ORIGIN = 0x38000400, LENGTH = 63K
|
||||
* }
|
||||
* __OPENAMP_region_start__ = ORIGIN(OPEN_AMP_SHMEM);
|
||||
* __OPENAMP_region_end__ = ORIGIN(OPEN_AMP_SHMEM) + LENGTH(OPEN_AMP_SHMEM);
|
||||
*
|
||||
* using the LENGTH(OPEN_AMP_SHMEM) to set the SHM_SIZE lead to a crash thus we
|
||||
* use the start and end address.
|
||||
*/
|
||||
|
||||
extern int __OPENAMP_region_start__[]; /* defined by linker script */
|
||||
extern int __OPENAMP_region_end__[]; /* defined by linker script */
|
||||
|
||||
#define SHM_START_ADDRESS ((metal_phys_addr_t)__OPENAMP_region_start__)
|
||||
#define SHM_SIZE (size_t)((void *)__OPENAMP_region_end__ - (void *) __OPENAMP_region_start__)
|
||||
|
||||
#endif
|
||||
|
||||
#if defined LINUX_RPROC_MASTER
|
||||
#define VRING_RX_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_TX_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_BUFF_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_ALIGNMENT 16 /* fixed to match with linux constraint */
|
||||
#define VRING_NUM_BUFFS 16 /* number of rpmsg buffer */
|
||||
#else
|
||||
#define VRING_RX_ADDRESS SHM_START_ADDRESS
|
||||
#define VRING_TX_ADDRESS (SHM_START_ADDRESS + 0x400)
|
||||
#define VRING_BUFF_ADDRESS (SHM_START_ADDRESS + 0x800)
|
||||
#define VRING_ALIGNMENT 4
|
||||
#define VRING_NUM_BUFFS 4 /* number of rpmsg buffers */
|
||||
#endif
|
||||
|
||||
/* Fixed parameter */
|
||||
|
||||
#define NUM_RESOURCE_ENTRIES 2
|
||||
|
||||
#define VRING_COUNT 2
|
||||
|
||||
#define VDEV_ID 0xFF
|
||||
|
||||
#define VRING0_ID 0 /* VRING0 ID (master to remote) fixed to 0 for linux compatibility*/
|
||||
|
||||
#define VRING1_ID 1 /* VRING1 ID (remote to master) fixed to 1 for linux compatibility */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Macros OPENAMP_CONF_Exported_Macros
|
||||
* @brief Aliases.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* DEBUG macros */
|
||||
|
||||
#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
|
||||
#define OPENAMP_log_dbg log_dbg
|
||||
#define OPENAMP_log_info log_info
|
||||
#define OPENAMP_log_warn log_warn
|
||||
#define OPENAMP_log_err log_err
|
||||
#else
|
||||
#define OPENAMP_log_dbg(...)
|
||||
#define OPENAMP_log_info(...)
|
||||
#define OPENAMP_log_warn(...)
|
||||
#define OPENAMP_log_err(...)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Types OPENAMP_CONF_Exported_Types
|
||||
* @brief Types.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_FunctionsPrototype OPENAMP_CONF_Exported_FunctionsPrototype
|
||||
* @brief Declaration of public functions for OpenAMP mw.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported functions -------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __OPENAMP_CONF__H__ */
|
||||
|
||||
@@ -0,0 +1,175 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file rsc_table.c
|
||||
* @author MCD Application Team
|
||||
* @brief Resource table
|
||||
*
|
||||
* This file provides a default resource table requested by remote proc to
|
||||
* load the elf file. It also allows to add debug trace using a shared buffer.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/** @addtogroup RSC_TABLE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(__ICCARM__) || defined (__CC_ARM)
|
||||
#include <stddef.h> /* needed for offsetof definition*/
|
||||
#endif
|
||||
#include "rsc_table.h"
|
||||
#include "openamp/open_amp.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Place resource table in special ELF section */
|
||||
#if defined(__GNUC__)
|
||||
#define __section_t(S) __attribute__((__section__(#S)))
|
||||
#define __resource __section_t(.resource_table)
|
||||
#endif
|
||||
|
||||
#if defined (LINUX_RPROC_MASTER)
|
||||
#ifdef VIRTIO_MASTER_ONLY
|
||||
#define CONST
|
||||
#else
|
||||
#define CONST const
|
||||
#endif
|
||||
#else
|
||||
#define CONST
|
||||
#endif
|
||||
|
||||
#define RPMSG_IPU_C0_FEATURES 1
|
||||
#define VRING_COUNT 2
|
||||
|
||||
/* VirtIO rpmsg device id */
|
||||
#define VIRTIO_ID_RPMSG_ 7
|
||||
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
extern char system_log_buf[];
|
||||
#endif
|
||||
|
||||
#if defined(__GNUC__)
|
||||
#if !defined (__CC_ARM) && !defined (LINUX_RPROC_MASTER)
|
||||
|
||||
/* Since GCC is not initializing the resource_table at startup, it is declared as volatile to avoid compiler optimization
|
||||
* for the CM4 (see resource_table_init() below)
|
||||
*/
|
||||
volatile struct shared_resource_table __resource __attribute__((used)) resource_table;
|
||||
#else
|
||||
CONST struct shared_resource_table __resource __attribute__((used)) resource_table = {
|
||||
#endif
|
||||
#elif defined(__ICCARM__)
|
||||
__root CONST struct shared_resource_table resource_table @ ".resource_table" = {
|
||||
#endif
|
||||
|
||||
#if defined(__ICCARM__) || defined (__CC_ARM) || defined (LINUX_RPROC_MASTER)
|
||||
.version = 1,
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
.num = 2,
|
||||
#else
|
||||
.num = 1,
|
||||
#endif
|
||||
.reserved = {0, 0},
|
||||
.offset = {
|
||||
offsetof(struct shared_resource_table, vdev),
|
||||
offsetof(struct shared_resource_table, cm_trace),
|
||||
},
|
||||
|
||||
/* Virtio device entry */
|
||||
.vdev= {
|
||||
RSC_VDEV, VIRTIO_ID_RPMSG_, 0, RPMSG_IPU_C0_FEATURES, 0, 0, 0,
|
||||
VRING_COUNT, {0, 0},
|
||||
},
|
||||
|
||||
/* Vring rsc entry - part of vdev rsc entry */
|
||||
.vring0 = {VRING_TX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING0_ID, 0},
|
||||
.vring1 = {VRING_RX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING1_ID, 0},
|
||||
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
.cm_trace = {
|
||||
RSC_TRACE,
|
||||
(uint32_t)system_log_buf, SYSTEM_TRACE_BUF_SZ, 0, "cm4_log",
|
||||
},
|
||||
#endif
|
||||
} ;
|
||||
#endif
|
||||
|
||||
void resource_table_init(int RPMsgRole, void **table_ptr, int *length)
|
||||
{
|
||||
|
||||
#if !defined (LINUX_RPROC_MASTER)
|
||||
#if defined (__GNUC__) && ! defined (__CC_ARM)
|
||||
#ifdef VIRTIO_MASTER_ONLY
|
||||
|
||||
/*
|
||||
* Currently the GCC linker doesn't initialize the resource_table global variable at startup
|
||||
* it is done here by the master application.
|
||||
*/
|
||||
memset(&resource_table, '\0', sizeof(struct shared_resource_table));
|
||||
resource_table.num = 1;
|
||||
resource_table.version = 1;
|
||||
resource_table.offset[0] = offsetof(struct shared_resource_table, vdev);
|
||||
|
||||
resource_table.vring0.da = VRING_TX_ADDRESS;
|
||||
resource_table.vring0.align = VRING_ALIGNMENT;
|
||||
resource_table.vring0.num = VRING_NUM_BUFFS;
|
||||
resource_table.vring0.notifyid = VRING0_ID;
|
||||
|
||||
resource_table.vring1.da = VRING_RX_ADDRESS;
|
||||
resource_table.vring1.align = VRING_ALIGNMENT;
|
||||
resource_table.vring1.num = VRING_NUM_BUFFS;
|
||||
resource_table.vring1.notifyid = VRING1_ID;
|
||||
|
||||
resource_table.vdev.type = RSC_VDEV;
|
||||
resource_table.vdev.id = VIRTIO_ID_RPMSG_;
|
||||
resource_table.vdev.num_of_vrings=VRING_COUNT;
|
||||
resource_table.vdev.dfeatures = RPMSG_IPU_C0_FEATURES;
|
||||
#else
|
||||
|
||||
/* For the slave application let's wait until the resource_table is correctly initialized */
|
||||
while(resource_table.vring1.da != VRING_RX_ADDRESS)
|
||||
{
|
||||
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
(void)RPMsgRole;
|
||||
*length = sizeof(resource_table);
|
||||
*table_ptr = (void *)&resource_table;
|
||||
}
|
||||
@@ -0,0 +1,74 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* This file populates resource table for BM remote
|
||||
* for use by the Linux Master */
|
||||
/* USER CODE END Header */
|
||||
|
||||
#ifndef RSC_TABLE_H_
|
||||
#define RSC_TABLE_H_
|
||||
|
||||
#include "openamp/open_amp.h"
|
||||
#include "openamp_conf.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* Resource table for the given remote */
|
||||
struct shared_resource_table {
|
||||
unsigned int version;
|
||||
unsigned int num;
|
||||
unsigned int reserved[2];
|
||||
unsigned int offset[NUM_RESOURCE_ENTRIES];
|
||||
/* text carveout entry */
|
||||
|
||||
/* rpmsg vdev entry */
|
||||
struct fw_rsc_vdev vdev;
|
||||
struct fw_rsc_vdev_vring vring0;
|
||||
struct fw_rsc_vdev_vring vring1;
|
||||
struct fw_rsc_trace cm_trace;
|
||||
};
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
void resource_table_init(int RPMsgRole, void **table_ptr, int *length);
|
||||
|
||||
#endif /* RSC_TABLE_H_ */
|
||||
@@ -0,0 +1,210 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Author : STM32CubeIDE
|
||||
**
|
||||
** Abstract : Linker script for STM32H7 series
|
||||
** 1024Kbytes FLASH and 288Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2024 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08100000, LENGTH = 1024K
|
||||
RAM (xrw) : ORIGIN = 0x10000000, LENGTH = 288K
|
||||
OPEN_AMP_RSCT (xrw) : ORIGIN = 0x38000000, LENGTH = 1K
|
||||
OPEN_AMP_SHMEM (xrw) : ORIGIN = 0x38000400, LENGTH = 63K
|
||||
}
|
||||
|
||||
__OPENAMP_region_start__ = ORIGIN(OPEN_AMP_SHMEM);
|
||||
__OPENAMP_region_size__ = LENGTH(OPEN_AMP_SHMEM);
|
||||
__OPENAMP_region_end__ = ORIGIN(OPEN_AMP_SHMEM) + LENGTH(OPEN_AMP_SHMEM);
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} >FLASH
|
||||
.ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
.RxDescripSection 0x10040000 (NOLOAD) :
|
||||
{
|
||||
*(.RxDescripSection)
|
||||
*(.RxDescripSection*)
|
||||
. = ALIGN(32);
|
||||
} >RAM
|
||||
|
||||
.TxDescripSection 0x10040080 (NOLOAD) :
|
||||
{
|
||||
*(.TxDescripSection)
|
||||
*(.TxDescripSection*)
|
||||
. = ALIGN(32);
|
||||
} >RAM
|
||||
|
||||
.EthBuffersSection 0x10040100 (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(32);
|
||||
*(.EthBuffersSection)
|
||||
*(.EthBuffersSection*)
|
||||
. = ALIGN(32);
|
||||
} >RAM
|
||||
|
||||
.openamp_section (NOLOAD) :
|
||||
{
|
||||
. = ABSOLUTE(0x38000000);
|
||||
*(.resource_table)
|
||||
} > OPEN_AMP_RSCT AT >FLASH
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,177 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld (debug in RAM dedicated)
|
||||
**
|
||||
** Author : STM32CubeIDE
|
||||
**
|
||||
** Abstract : Linker script for STM32H7 series
|
||||
** 128Kbytes RAM_EXEC and 160Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2024 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM_EXEC (rx) : ORIGIN = 0x10000000, LENGTH = 128K
|
||||
RAM (xrw) : ORIGIN = 0x10020000, LENGTH = 160K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into RAM_EXEC */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >RAM_EXEC
|
||||
|
||||
/* The program code and other data goes into RAM_EXEC */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >RAM_EXEC
|
||||
|
||||
/* Constant data goes into RAM_EXEC */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >RAM_EXEC
|
||||
|
||||
.ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} >RAM_EXEC
|
||||
.ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >RAM_EXEC
|
||||
|
||||
.preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >RAM_EXEC
|
||||
.init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >RAM_EXEC
|
||||
.fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >RAM_EXEC
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> RAM_EXEC
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,282 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<storageModule moduleId="org.eclipse.cdt.core.settings">
|
||||
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083" moduleId="org.eclipse.cdt.core.settings" name="Debug">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
|
||||
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083." name="/" resourcePath="">
|
||||
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.828207417" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.437059308" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32H755ZITx" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1019120318" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.2106454890" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.2011355551" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv5-d16" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1587876848" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.263425911" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.68099515" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32H755ZITx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy | ../../Drivers/CMSIS/Device/ST/STM32H7xx/Include | ../../Drivers/CMSIS/Include | ../OPENAMP | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc | ../../Middlewares/Third_Party/OpenAMP/virtual_driver | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg || || || CORE_CM7 | USE_HAL_DRIVER | STM32H755xx | METAL_INTERNAL | METAL_MAX_DEVICE_REGIONS=2 | RPMSG_BUFFER_SIZE=512 | VIRTIO_MASTER_ONLY | NO_ATOMIC_64_SUPPORT | USE_PWR_DIRECT_SMPS_SUPPLY || || Core/Src | Drivers | OPENAMP | Core/Startup | Middlewares | Common || || || ${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || || ::" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1152195024" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="200" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.runtimelibrary_c.1180963885" name="Runtime library" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.runtimelibrary_c" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.runtimelibrary_c.value.nano_c" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoprintffloat.1500291335" name="Use float with printf from newlib-nano (-u _printf_float)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoprintffloat" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoscanffloat.1674214688" name="Use float with scanf from newlib-nano (-u _scanf_float)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoscanffloat" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.717110142" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||
<builder buildPath="${workspace_loc:/stepper_h7_CM7}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.189481723" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.2126497667" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1966634911" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.805168015" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="VIRTIO_MASTER_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.592520860" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibL6474/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibSpindle/inc"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc/Stepper"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/conf"/>
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.224848552" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1324252333" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.2043881931" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.214193850" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1895861679" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="CORE_CM7"/>
|
||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
||||
<listOptionValue builtIn="false" value="STM32H755xx"/>
|
||||
<listOptionValue builtIn="false" value="VIRTIO_MASTER_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
<listOptionValue builtIn="false" value="USE_PWR_DIRECT_SMPS_SUPPLY"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.2037184141" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Device/ST/STM32H7xx/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibL6474/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibSpindle/inc"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc/Stepper"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/conf"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/virtual_driver"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.808169832" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2065828702" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1671765798" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1568560894" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1783271802" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1797991315" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld}" valueType="string"/>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.2023946675" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.585275424" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.971959260" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.562656190" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.712023138" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1194938928" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.824238684" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.465756616" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1501101643" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.2134289215" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/>
|
||||
<entry excluding="Src/FreeRTOS-Kernel/portable/Common/mpu_wrappers.c|Src/FreeRTOS-Kernel/portable/MSVC-MingW|Src/FreeRTOS-Kernel/portable/Clang-Win32|Src/sysmem.c|Src/syscalls.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
|
||||
<entry excluding="FreeRTOS-Kernel/portable/GCC/ARM_CM4F|FreeRTOS-Kernel/portable/MemMang|FreeRTOS-Kernel/portable/MSVC-MingW|FreeRTOS-Kernel/portable/Clang-Win32" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="OPENAMP"/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473" moduleId="org.eclipse.cdt.core.settings" name="Release">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
|
||||
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473." name="/" resourcePath="">
|
||||
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.1373760315" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1001657360" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32H755ZITx" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1397933605" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.741203287" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.359026103" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv5-d16" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1076148112" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.310363595" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.2076124675" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32H755ZITx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc | ../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy | ../../Drivers/CMSIS/Device/ST/STM32H7xx/Include | ../../Drivers/CMSIS/Include | ../OPENAMP | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include | ../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc | ../../Middlewares/Third_Party/OpenAMP/virtual_driver | ../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg || || || CORE_CM7 | USE_HAL_DRIVER | STM32H755xx | METAL_INTERNAL | METAL_MAX_DEVICE_REGIONS=2 | RPMSG_BUFFER_SIZE=512 | VIRTIO_MASTER_ONLY | NO_ATOMIC_64_SUPPORT | USE_PWR_DIRECT_SMPS_SUPPLY || || Core/Src | Drivers | OPENAMP | Core/Startup | Middlewares | Common || || || ${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || || ::" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1927445715" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="200" valueType="string"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.2125210637" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||
<builder buildPath="${workspace_loc:/stepper_h7_CM7}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.204738127" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.102363953" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1118615991" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.703145142" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibL6474/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibSpindle/inc"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc/Stepper"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/conf"/>
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.1027009994" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="VIRTIO_MASTER_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.306020802" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1322353819" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.922859198" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.123357632" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.271711727" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="CORE_CM7"/>
|
||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
||||
<listOptionValue builtIn="false" value="STM32H755xx"/>
|
||||
<listOptionValue builtIn="false" value="VIRTIO_MASTER_ONLY"/>
|
||||
<listOptionValue builtIn="false" value="METAL_INTERNAL"/>
|
||||
<listOptionValue builtIn="false" value="METAL_MAX_DEVICE_REGIONS=2"/>
|
||||
<listOptionValue builtIn="false" value="NO_ATOMIC_64_SUPPORT"/>
|
||||
<listOptionValue builtIn="false" value="RPMSG_BUFFER_SIZE=512"/>
|
||||
<listOptionValue builtIn="false" value="STM32H7"/>
|
||||
<listOptionValue builtIn="false" value="USE_PWR_DIRECT_SMPS_SUPPLY"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.651899210" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value="../Core/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/STM32H7xx_HAL_Driver/Inc/Legacy"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Device/ST/STM32H7xx/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../Drivers/CMSIS/Include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/include"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/FreeRTOS-LTS/FreeRTOS/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibL6474/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/inc"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibSpindle/inc"/>
|
||||
<listOptionValue builtIn="false" value="../Core/Inc/Stepper"/>
|
||||
<listOptionValue builtIn="false" value="../../../libs/LibRTOSConsole/conf"/>
|
||||
<listOptionValue builtIn="false" value="../OPENAMP"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/libmetal/lib/include/metal/compiler/gcc"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/include"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg"/>
|
||||
<listOptionValue builtIn="false" value="../../Middlewares/Third_Party/OpenAMP/virtual_driver"/>
|
||||
</option>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.205497963" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.416390792" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.368073321" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1864894896" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1593047652" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1538795186" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32H755ZITX_FLASH.ld}" valueType="string"/>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.626636160" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1721506507" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1372113103" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1540897759" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.2072802314" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.76942396" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1172432736" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.515511909" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.918200438" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.2101137517" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/>
|
||||
<entry excluding="Src/FreeRTOS-Kernel/portable/Common/mpu_wrappers.c|Src/FreeRTOS-Kernel/portable/MSVC-MingW|Src/FreeRTOS-Kernel/portable/Clang-Win32|Src/sysmem.c|Src/syscalls.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
|
||||
<entry excluding="FreeRTOS-Kernel/portable/GCC/ARM_CM4F|FreeRTOS-Kernel/portable/MemMang|FreeRTOS-Kernel/portable/MSVC-MingW|FreeRTOS-Kernel/portable/Clang-Win32" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="OPENAMP"/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<project id="stepper_h7_CM7.null.175305128" name="stepper_h7_CM7"/>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
<storageModule moduleId="refreshScope"/>
|
||||
<storageModule moduleId="scannerConfiguration">
|
||||
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1322353819;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.205497963">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1324252333;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.808169832">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1098337479;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1098337479.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1007388151;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.2015107268">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1244977841;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1244977841.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.613622070;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1464540345">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1571300557;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1571300557.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.784689073;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.638121124">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1338325331;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1338325331.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1915944352;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1100093761">
|
||||
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
|
||||
</scannerConfigBuildInfo>
|
||||
</storageModule>
|
||||
</cproject>
|
||||
@@ -0,0 +1,3 @@
|
||||
build
|
||||
Debug
|
||||
Release
|
||||
@@ -0,0 +1,883 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<projectDescription>
|
||||
<name>stepper_h7_CM7</name>
|
||||
<comment></comment>
|
||||
<projects>
|
||||
</projects>
|
||||
<buildSpec>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
|
||||
<triggers>clean,full,incremental,</triggers>
|
||||
<arguments>
|
||||
</arguments>
|
||||
</buildCommand>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
|
||||
<triggers>full,incremental,</triggers>
|
||||
<arguments>
|
||||
</arguments>
|
||||
</buildCommand>
|
||||
</buildSpec>
|
||||
<natures>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
|
||||
<nature>org.eclipse.cdt.core.cnature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
|
||||
<nature>com.st.stm32cube.ide.mcu.MCUMultiCpuProjectNature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
|
||||
</natures>
|
||||
<linkedResources>
|
||||
<link>
|
||||
<name>Common</name>
|
||||
<type>2</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Common</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/LICENSE.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/LICENSE.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/CMakeLists.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/CMakeLists.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.json</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.json</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.xml</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.xml</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.yaml</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/FreeRTOS-Kernel-V11.3.0-repository-SPDX2.3.spdx.yaml</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/GitHub-FreeRTOS-Kernel-Home.url</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/GitHub-FreeRTOS-Kernel-Home.url</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/History.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/History.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/LICENSE.md</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/LICENSE.md</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/MISRA.md</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/MISRA.md</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/Quick_Start_Guide.url</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/Quick_Start_Guide.url</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/README.md</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/README.md</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/croutine.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/croutine.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/cspell.config.yaml</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/cspell.config.yaml</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/event_groups.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/event_groups.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/list.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/list.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/manifest.yml</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/manifest.yml</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/queue.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/queue.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/stream_buffer.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/stream_buffer.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/tasks.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/tasks.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/timers.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/timers.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Console/inc</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Stepper/conf</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Stepper/inc</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Src/Console/Console.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibRTOSConsole/src/Console.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Src/Spindle/Spindle.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibSpindle/src/Spindle.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Src/Stepper/src</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/Legacy</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_spi.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_spi.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_spi_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_spi_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_spi.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_spi.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_tim.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_tim.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/CMakeLists.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/CMakeLists.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/FreeRTOS.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/FreeRTOS.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/StackMacros.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/StackMacros.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/atomic.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/atomic.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/croutine.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/croutine.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/deprecated_definitions.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/deprecated_definitions.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/event_groups.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/event_groups.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/list.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/list.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/message_buffer.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/message_buffer.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/mpu_prototypes.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/mpu_prototypes.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/mpu_syscall_numbers.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/mpu_syscall_numbers.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/mpu_wrappers.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/mpu_wrappers.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/newlib-freertos.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/newlib-freertos.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/picolibc-freertos.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/picolibc-freertos.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/portable.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/portable.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/projdefs.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/projdefs.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/queue.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/queue.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/semphr.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/semphr.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/stack_macros.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/stack_macros.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/stdint.readme</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/stdint.readme</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/stream_buffer.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/stream_buffer.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/task.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/task.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/include/timers.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/include/timers.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/CMakeLists.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/CMakeLists.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/Common</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MSVC-MingW</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/readme.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/readme.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/condition.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/condition.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/device.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/device.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/generic_device.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/generic_device.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/generic_init.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/generic_init.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/generic_io.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/generic_io.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/generic_shmem.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/generic_shmem.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/init.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/init.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/io.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/io.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/log.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/log.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/remoteproc_virtio.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/open-amp/lib/remoteproc/remoteproc_virtio.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/rpmsg.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg/rpmsg.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/rpmsg_virtio.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/shmem.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/shmem.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/sys.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/cortexm/sys.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/time.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/libmetal/lib/system/generic/time.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/virtio.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/open-amp/lib/virtio/virtio.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/Third_Party/OpenAMP/virtqueue.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Middlewares/Third_Party/OpenAMP/open-amp/lib/virtio/virtqueue.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Console/inc/Console.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibRTOSConsole/inc/Console.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Stepper/conf/LibL6474Config.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibL6474/conf/LibL6474Config.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Inc/Stepper/inc/LibL6474.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibL6474/inc/LibL6474.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Core/Src/Stepper/src/LibL6474x.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/LibL6474/src/LibL6474x.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/Common/mpu_wrappers.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/Common/mpu_wrappers.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/Common/mpu_wrappers_v2.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/Common/mpu_wrappers_v2.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM4F</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM7</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MSVC-MingW/port.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MSVC-MingW/port.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MSVC-MingW/portmacro.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MSVC-MingW/portmacro.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/ReadMe.url</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/ReadMe.url</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/heap_1.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/heap_1.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/heap_2.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/heap_2.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/heap_3.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/heap_3.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/heap_4.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/heap_4.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/MemMang/heap_5.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/MemMang/heap_5.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM4F/portmacro.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM4F/portmacro.h</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM7/ReadMe.txt</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM7/ReadMe.txt</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1</name>
|
||||
<type>2</type>
|
||||
<locationURI>virtual:/virtual</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1/port.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1/port.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Middlewares/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1/portmacro.h</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/libs/FreeRTOS-LTS/202604.00/FreeRTOS-Kernel/portable/GCC/ARM_CM7/r0p1/portmacro.h</locationURI>
|
||||
</link>
|
||||
</linkedResources>
|
||||
</projectDescription>
|
||||
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
sfrviewstate={"fFavorites"\:{"fLists"\:{}},"fProperties"\:{"fNodeProperties"\:{}}}
|
||||
@@ -0,0 +1,25 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<project>
|
||||
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1194244083" name="Debug">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider-reference id="org.eclipse.cdt.ui.UserLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1384704166455685363" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1660277473" name="Release">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider-reference id="org.eclipse.cdt.ui.UserLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1384704166455685363" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
</project>
|
||||
@@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
encoding/<project>=UTF-8
|
||||
@@ -0,0 +1,4 @@
|
||||
2F62501ED4689FB349E356AB974DBE57=D0CF62532CA6CA2614F74C6DE0AF97FD
|
||||
8DF89ED150041C4CBC7CB9A9CAA90856=D0CF62532CA6CA2614F74C6DE0AF97FD
|
||||
DC22A860405A8BF2F2C095E5B6529F12=7D1615E95F6C9AB913AD38D8A4D77383
|
||||
eclipse.preferences.version=1
|
||||
@@ -0,0 +1,18 @@
|
||||
/*
|
||||
* ConsoleConfig.h
|
||||
*
|
||||
* Created on: Dec 9, 2024
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
#ifndef INC_CONSOLE_CONSOLECONFIG_H_
|
||||
#define INC_CONSOLE_CONSOLECONFIG_H_
|
||||
|
||||
#define CONSOLE_USERNAME "STM32"
|
||||
#define CONSOLE_USE_DYNAMIC_USERNAME 1
|
||||
#define CONSOLE_LINE_HISTORY 8
|
||||
#define CONSOLE_LINE_SIZE 120
|
||||
#define CONSOLE_COMMAND_MAX_LENGTH 64
|
||||
#define CONSOLE_HELP_MAX_LENGTH 512
|
||||
|
||||
#endif /* INC_CONSOLE_CONSOLECONFIG_H_ */
|
||||
@@ -0,0 +1,141 @@
|
||||
#ifndef FREERTOS_CONFIG_H
|
||||
#define FREERTOS_CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------
|
||||
* Application specific definitions.
|
||||
*
|
||||
* These definitions should be adjusted for your particular hardware and
|
||||
* application requirements.
|
||||
*
|
||||
* These parameters and more are described within the 'configuration' section of the
|
||||
* FreeRTOS API documentation available on the FreeRTOS.org web site.
|
||||
*
|
||||
* See http://www.freertos.org/a00110.html
|
||||
*----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* Section where include file can be added */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Ensure definitions are only used by the compiler, and not by the assembler. */
|
||||
#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
|
||||
#include <stdint.h>
|
||||
extern uint32_t SystemCoreClock;
|
||||
/* USER CODE BEGIN 0 */
|
||||
extern void configureTimerForRunTimeStats(void);
|
||||
extern unsigned long getRunTimeCounterValue(void);
|
||||
/* USER CODE END 0 */
|
||||
#endif
|
||||
#define configENABLE_FPU 1
|
||||
#define configENABLE_MPU 0
|
||||
|
||||
#define configUSE_PREEMPTION 1
|
||||
#define configSUPPORT_STATIC_ALLOCATION 0
|
||||
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ ( SystemCoreClock )
|
||||
#define configTICK_RATE_HZ ((TickType_t)1000)
|
||||
#define configMAX_PRIORITIES ( 7 )
|
||||
#define configMINIMAL_STACK_SIZE ((uint16_t)1024)
|
||||
#define configTOTAL_HEAP_SIZE ((size_t)0x20000)
|
||||
#define configMAX_TASK_NAME_LEN ( 16 )
|
||||
#define configQUEUE_REGISTRY_SIZE ( 32 )
|
||||
#define configGENERATE_RUN_TIME_STATS 1
|
||||
#define configUSE_TRACE_FACILITY 1
|
||||
#define configUSE_STATS_FORMATTING_FUNCTIONS 1
|
||||
#define configUSE_16_BIT_TICKS 0
|
||||
#define configUSE_MUTEXES 1
|
||||
#define configUSE_TIMERS 1
|
||||
#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
|
||||
#define configTIMER_QUEUE_LENGTH 8
|
||||
#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 4 )
|
||||
#define configCHECK_FOR_STACK_OVERFLOW 2
|
||||
#define configUSE_RECURSIVE_MUTEXES 1
|
||||
#define configUSE_MALLOC_FAILED_HOOK 1
|
||||
#define configUSE_COUNTING_SEMAPHORES 1
|
||||
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
|
||||
/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
|
||||
/* Defaults to size_t for backward compatibility, but can be changed
|
||||
if lengths will always be less than the number of bytes in a size_t. */
|
||||
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
|
||||
/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
|
||||
|
||||
/* Co-routine definitions. */
|
||||
#define configUSE_CO_ROUTINES 0
|
||||
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
|
||||
|
||||
/* The following flag must be enabled only when using newlib */
|
||||
#define configUSE_NEWLIB_REENTRANT 1
|
||||
#define configCHECK_HANDLER_INSTALLATION 1
|
||||
/* Set the following definitions to 1 to include the API function, or zero
|
||||
to exclude the API function. */
|
||||
#define INCLUDE_vTaskPrioritySet 1
|
||||
#define INCLUDE_uxTaskPriorityGet 1
|
||||
#define INCLUDE_vTaskDelete 1
|
||||
#define INCLUDE_vTaskCleanUpResources 0
|
||||
#define INCLUDE_vTaskSuspend 1
|
||||
#define INCLUDE_vTaskDelayUntil 1
|
||||
#define INCLUDE_vTaskDelay 1
|
||||
#define INCLUDE_xTaskGetSchedulerState 1
|
||||
|
||||
/* Cortex-M specific definitions. */
|
||||
#ifdef __NVIC_PRIO_BITS
|
||||
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||
#else
|
||||
#define configPRIO_BITS 4
|
||||
#endif
|
||||
|
||||
/* The lowest interrupt priority that can be used in a call to a "set priority"
|
||||
function. */
|
||||
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
|
||||
|
||||
/* The highest interrupt priority that can be used by any interrupt service
|
||||
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
|
||||
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
|
||||
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
|
||||
|
||||
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
|
||||
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||
header file. */
|
||||
/* USER CODE BEGIN 1 */
|
||||
void vAssertCalled( const char * const pcFileName, unsigned long ulLine );
|
||||
#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); vAssertCalled( __FILE__, __LINE__);}
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
|
||||
standard names. */
|
||||
#define vPortSVCHandler SVC_Handler
|
||||
#define xPortPendSVHandler PendSV_Handler
|
||||
|
||||
/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
|
||||
to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
|
||||
|
||||
//#define xPortSysTickHandler SysTick_Handler
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
/* Definitions needed when configGENERATE_RUN_TIME_STATS is on */
|
||||
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() //SetupRunTimeStatsTimer
|
||||
#define portGET_RUN_TIME_COUNTER_VALUE() (xTaskGetTickCount())//GetHighFrequencyTickValue
|
||||
|
||||
#define configISR_STACK_SIZE_WORDS 4096
|
||||
#define configUSE_NEWLIB_REENTRANT 1
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* USER CODE BEGIN Defines */
|
||||
#define configAPPLICATION_ALLOCATED_HEAP 1
|
||||
#define configRECORD_STACK_HIGH_ADDRESS 1 /* 1: record stack high address for the debugger, 0: do not record stack high address */
|
||||
/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
|
||||
|
||||
|
||||
/* USER CODE END Defines */
|
||||
|
||||
#endif /* FREERTOS_CONFIG_H */
|
||||
@@ -0,0 +1,101 @@
|
||||
/*
|
||||
* ipc_eth_producer.h
|
||||
*
|
||||
* Created on: 12.08.2026
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
#ifndef INC_IPC_IPC_ETH_PRODUCER_H_
|
||||
#define INC_IPC_IPC_ETH_PRODUCER_H_
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#define IPC_PKT_HEADERLEN (20 )
|
||||
#define IPC_PKT_CONTROL_TYPE (0xDEADBEEF )
|
||||
#define IPC_PKT_MAXSIZE (RPMSG_BUFFER_SIZE-8*sizeof(void*)-IPC_PKT_HEADERLEN)
|
||||
|
||||
#define IPC_CTRLREMOTE_SPINDLE_START (0xA0 )
|
||||
#define IPC_CTRLREMOTE_SPINDLE_STOP (0xA1 )
|
||||
#define IPC_CTRLREMOTE_STEP_RESET (0xA2 )
|
||||
#define IPC_CTRLREMOTE_STEP_REF (0xA3 )
|
||||
#define IPC_CTRLREMOTE_STEP_ON (0xA4 )
|
||||
#define IPC_CTRLREMOTE_STEP_OFF (0xA5 )
|
||||
#define IPC_CTRLREMOTE_STEP_MOVE (0xA6 )
|
||||
#define IPC_CTRLREMOTE_MAX_LENGTH (20 )
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
typedef struct ipc_eth_packet
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
unsigned int magic;
|
||||
unsigned int type;
|
||||
unsigned int length;
|
||||
unsigned int seqID;
|
||||
int result;
|
||||
char payload[IPC_PKT_MAXSIZE];
|
||||
} __attribute__((packed)) ipc_eth_packet_t;
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
typedef struct IPC_ETH_PRODUCER_Context *IPC_ETH_PRODUCER_Context_t;
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
typedef struct IPC_ETH_PRODUCER_Handle *IPC_ETH_PRODUCER_Handle_t;
|
||||
struct IPC_ETH_PRODUCER_Handle
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
IPC_ETH_PRODUCER_Context_t priv;
|
||||
struct
|
||||
{
|
||||
void* rxCtrlPriv;
|
||||
void (*rxCtrlCallback)(IPC_ETH_PRODUCER_Handle_t, ipc_eth_packet_t*, void*);
|
||||
void (*statusReqCallback)(IPC_ETH_PRODUCER_Handle_t, void*[3]);
|
||||
void* statusReqPriv[3];
|
||||
} callbacks;
|
||||
};
|
||||
|
||||
|
||||
/*!
|
||||
* The IPC_ETH_PRODUCER_Init function is used to create the OpenAMP endpoints and to manage the IPC and protocol stuff to
|
||||
* forward Ethernet packets to report current status of the system to a network application.
|
||||
*
|
||||
* The return value of IPC_ETH_PRODUCER_Init is a null pointer in case an error occured or a pointer of type IPC_ETH_PRODUCER_Handle_t.
|
||||
*
|
||||
* param endpoint is the endpoint name which has to fit the remote endpoint name exactly
|
||||
*
|
||||
* ATTENTION: This function is not locked or guarded and therefore its never thread safe when calling from two different threads
|
||||
* at the same or nearly the same time while no instance has been created before! One pointer and its ressources could be lost
|
||||
* which leads to a memory leak and/or to OpenAMP registration issues at runtime!
|
||||
*/
|
||||
IPC_ETH_PRODUCER_Handle_t IPC_ETH_PRODUCER_Init(const char *endpoint);
|
||||
|
||||
|
||||
/*!
|
||||
* The IPC_ETH_PRODUCER_GetIPAddress function is used to read back the current IP address of the system and can be used
|
||||
* to determine whether a vital link is present or not
|
||||
*
|
||||
* The return value of IPC_ETH_PRODUCER_GetIPAddress is non-zero in case an error occured or 0 on success.
|
||||
*
|
||||
* param h is the handle of the IPC Controller which has been created before by calling IPC_ETH_PRODUCER_Init once
|
||||
* param ipv4 is the current IPv4 address of the ETH-Stack on remote side and can be 0.0.0.0 = 0x00000000
|
||||
* param subnet is the current subnet masks of the ETH-Stack on remote side and can be 0.0.0.0 = 0x00000000
|
||||
*/
|
||||
int IPC_ETH_PRODUCER_GetIPAddress(IPC_ETH_PRODUCER_Handle_t h, uint32_t *ipv4, uint32_t *subnet);
|
||||
|
||||
|
||||
/*!
|
||||
* The IPC_ETH_PRODUCER_SendPaket function is used to send data from the application to the remote network stack within the multi
|
||||
* processor system. the size and a pointer to tthe raw buffer must be provided. The packet is encapsulated by an IP and UDP frame,
|
||||
* The port and sender IP can not be changed and are managed by the remote network stack
|
||||
*
|
||||
* The return value of IPC_ETH_PRODUCER_GetIPAddress is non-zero in case an error occured or 0 on success.
|
||||
*
|
||||
* param h is the handle of the IPC Controller which has been created before by calling IPC_ETH_PRODUCER_Init once
|
||||
* param buff is the raw data buffer pointer of the network packet
|
||||
* param size is the number of bytes of the packet
|
||||
*/
|
||||
int IPC_ETH_PRODUCER_SendPaket(IPC_ETH_PRODUCER_Handle_t h, void* buff, int size);
|
||||
|
||||
|
||||
#endif /* INC_IPC_IPC_ETH_PRODUCER_H_ */
|
||||
Whitespace-only changes.
@@ -0,0 +1,16 @@
|
||||
/*
|
||||
* LibL6474Config.h
|
||||
*
|
||||
* Created on: Dec 2, 2024
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
#ifndef INC_LIBL6474_CONFIG_H_
|
||||
#define INC_LIBL6474_CONFIG_H_ INC_LIBL6474_CONFIG_H_
|
||||
|
||||
#define LIBL6474_STEP_ASYNC 0
|
||||
#define LIBL6474_HAS_LOCKING 0
|
||||
#define LIBL6474_DISABLE_OCD 0
|
||||
#define LIBL6474_HAS_FLAG 0
|
||||
|
||||
#endif /* INC_LIBL6474_CONFIG_H_ */
|
||||
@@ -0,0 +1,115 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32h7xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define SPINDLE_ENA_L_Pin GPIO_PIN_6
|
||||
#define SPINDLE_ENA_L_GPIO_Port GPIOE
|
||||
#define USR_BUTTON_Pin GPIO_PIN_13
|
||||
#define USR_BUTTON_GPIO_Port GPIOC
|
||||
#define SPINDLE_SI_R_Pin GPIO_PIN_0
|
||||
#define SPINDLE_SI_R_GPIO_Port GPIOA
|
||||
#define STEP_SPI_SCK_Pin GPIO_PIN_5
|
||||
#define STEP_SPI_SCK_GPIO_Port GPIOA
|
||||
#define STEP_SPI_MISO_Pin GPIO_PIN_6
|
||||
#define STEP_SPI_MISO_GPIO_Port GPIOA
|
||||
#define LED_GREEN_Pin GPIO_PIN_0
|
||||
#define LED_GREEN_GPIO_Port GPIOB
|
||||
#define SPINDLE_ENA_R_Pin GPIO_PIN_15
|
||||
#define SPINDLE_ENA_R_GPIO_Port GPIOE
|
||||
#define SPINDLE_PWM_L_Pin GPIO_PIN_10
|
||||
#define SPINDLE_PWM_L_GPIO_Port GPIOB
|
||||
#define SPINDLE_PWM_R_Pin GPIO_PIN_11
|
||||
#define SPINDLE_PWM_R_GPIO_Port GPIOB
|
||||
#define LED_RED_Pin GPIO_PIN_14
|
||||
#define LED_RED_GPIO_Port GPIOB
|
||||
#define DEBUG_UART_TX_Pin GPIO_PIN_8
|
||||
#define DEBUG_UART_TX_GPIO_Port GPIOD
|
||||
#define DEBUG_UART_RX_Pin GPIO_PIN_9
|
||||
#define DEBUG_UART_RX_GPIO_Port GPIOD
|
||||
#define STEP_SPI_CS_Pin GPIO_PIN_14
|
||||
#define STEP_SPI_CS_GPIO_Port GPIOD
|
||||
#define STEP_PULSE_Pin GPIO_PIN_15
|
||||
#define STEP_PULSE_GPIO_Port GPIOD
|
||||
#define STEP_RSTN_Pin GPIO_PIN_9
|
||||
#define STEP_RSTN_GPIO_Port GPIOG
|
||||
#define STEP_DIR_Pin GPIO_PIN_12
|
||||
#define STEP_DIR_GPIO_Port GPIOG
|
||||
#define STEP_FLAG_Pin GPIO_PIN_14
|
||||
#define STEP_FLAG_GPIO_Port GPIOG
|
||||
#define STEP_SPI_MOSI_Pin GPIO_PIN_5
|
||||
#define STEP_SPI_MOSI_GPIO_Port GPIOB
|
||||
#define REFERENCE_MARK_Pin GPIO_PIN_8
|
||||
#define REFERENCE_MARK_GPIO_Port GPIOB
|
||||
#define LIMIT_SWITCH_Pin GPIO_PIN_9
|
||||
#define LIMIT_SWITCH_GPIO_Port GPIOB
|
||||
#define SPINDLE_SI_L_Pin GPIO_PIN_0
|
||||
#define SPINDLE_SI_L_GPIO_Port GPIOE
|
||||
#define LED_YELLOW_Pin GPIO_PIN_1
|
||||
#define LED_YELLOW_GPIO_Port GPIOE
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
@@ -0,0 +1,514 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32H7xx_HAL_CONF_H
|
||||
#define STM32H7xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_FDCAN_MODULE_ENABLED */
|
||||
/* #define HAL_FMAC_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_COMP_MODULE_ENABLED */
|
||||
/* #define HAL_CORDIC_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_OTFDEC_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_HRTIM_MODULE_ENABLED */
|
||||
/* #define HAL_HSEM_MODULE_ENABLED */
|
||||
/* #define HAL_GFXMMU_MODULE_ENABLED */
|
||||
/* #define HAL_JPEG_MODULE_ENABLED */
|
||||
/* #define HAL_OPAMP_MODULE_ENABLED */
|
||||
/* #define HAL_OSPI_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_RAMECC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_SWPMI_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_JPEG_MODULE_ENABLED */
|
||||
/* #define HAL_MDIOS_MODULE_ENABLED */
|
||||
/* #define HAL_PSSI_MODULE_ENABLED */
|
||||
/* #define HAL_DTS_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_MDMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_HSEM_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal oscillator (CSI) default value.
|
||||
* This value is the default CSI value after Reset.
|
||||
*/
|
||||
#if !defined (CSI_VALUE)
|
||||
#define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* CSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0
|
||||
#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */
|
||||
#define USE_SPI_CRC 0U /*!< use CRC in SPI */
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
|
||||
#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */
|
||||
#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */
|
||||
#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */
|
||||
#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################### Ethernet Configuration ######################### */
|
||||
#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */
|
||||
#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */
|
||||
|
||||
#define ETH_MAC_ADDR0 (0x02UL)
|
||||
#define ETH_MAC_ADDR1 (0x00UL)
|
||||
#define ETH_MAC_ADDR2 (0x00UL)
|
||||
#define ETH_MAC_ADDR3 (0x00UL)
|
||||
#define ETH_MAC_ADDR4 (0x00UL)
|
||||
#define ETH_MAC_ADDR5 (0x00UL)
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MDMA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mdma.h"
|
||||
#endif /* HAL_MDMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DTS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dts.h"
|
||||
#endif /* HAL_DTS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_eth_legacy.h"
|
||||
#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_fdcan.h"
|
||||
#endif /* HAL_FDCAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORDIC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cordic.h"
|
||||
#endif /* HAL_CORDIC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GFXMMU_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_gfxmmu.h"
|
||||
#endif /* HAL_GFXMMU_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMAC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_fmac.h"
|
||||
#endif /* HAL_FMAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HRTIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hrtim.h"
|
||||
#endif /* HAL_HRTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HSEM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hsem.h"
|
||||
#endif /* HAL_HSEM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_JPEG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_jpeg.h"
|
||||
#endif /* HAL_JPEG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MDIOS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mdios.h"
|
||||
#endif /* HAL_MDIOS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ospi.h"
|
||||
#endif /* HAL_OSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OTFDEC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_otfdec.h"
|
||||
#endif /* HAL_OTFDEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PSSI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pssi.h"
|
||||
#endif /* HAL_PSSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RAMECC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_ramecc.h"
|
||||
#endif /* HAL_RAMECC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32H7xx_HAL_CONF_H */
|
||||
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32H7xx_IT_H
|
||||
#define __STM32H7xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void USART3_IRQHandler(void);
|
||||
void CM4_SEV_IRQHandler(void);
|
||||
void HSEM1_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32H7xx_IT_H */
|
||||
@@ -0,0 +1 @@
|
||||
used for symbolic linking or referencing from within IDEs, VSCode project is based on Makefiles and therefore this folder is not needed. It is more for CubeIDE Project structure!
|
||||
@@ -0,0 +1,384 @@
|
||||
/*
|
||||
* ipc_eth_consumer.c
|
||||
*
|
||||
* Created on: 11.08.2026
|
||||
* Author: Thorsten
|
||||
*/
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#include "main.h"
|
||||
#include "openamp.h"
|
||||
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "queue.h"
|
||||
#include "stdio.h"
|
||||
#include "assert.h"
|
||||
|
||||
#include "message_buffer.h"
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#include "IPC/ipc_eth_producer.h"
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
#define IPC_PKT_HEADERLEN (20 )
|
||||
#define IPC_PKT_ETHERNET_TYPE (0xDEADC0DE )
|
||||
#define IPC_PKT_DISCOVERY_TYPE (0xDEADDA7A )
|
||||
|
||||
#define IPC_CTRL_TYPE_GETPENDING (0x80 )
|
||||
#define IPC_CTRL_TYPE_GETIPADDR (0xF0 )
|
||||
#define IPC_CTRL_TYPE_GETSUBNET (0xF1 )
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static ipc_eth_packet_t heartbeatPayload = {
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
.magic = IPC_PKT_DISCOVERY_TYPE,
|
||||
.type = 0,
|
||||
.length = 37,
|
||||
.result = 0,
|
||||
.seqID = 0,
|
||||
.payload = "Hello from STM32H755ZI-Q on ARM CM7!"
|
||||
};
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
struct IPC_ETH_PRODUCER_Context
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
struct rpmsg_endpoint rp_endpoint;
|
||||
MessageBufferHandle_t mbufH;
|
||||
TaskHandle_t taskH;
|
||||
QueueHandle_t reqQH;
|
||||
int running;
|
||||
uint8_t tmp[(((IPC_PKT_MAXSIZE+sizeof(void*)-1)/sizeof(void*))*sizeof(void*))];
|
||||
char payload[IPC_PKT_MAXSIZE+4*sizeof(void*)];
|
||||
uint32_t ipaddr;
|
||||
uint32_t bcast;
|
||||
uint32_t subnet;
|
||||
};
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static ipc_eth_packet_t getIPAddress = {
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
.magic = IPC_PKT_CONTROL_TYPE,
|
||||
.type = IPC_CTRL_TYPE_GETIPADDR,
|
||||
.length = 0,
|
||||
.result = 0,
|
||||
.seqID = 0,
|
||||
};
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static ipc_eth_packet_t ethernetPkt = {
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
.magic = IPC_PKT_ETHERNET_TYPE,
|
||||
.type = 0,
|
||||
.length = 0,
|
||||
.result = 0,
|
||||
.seqID = 0,
|
||||
};
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static IPC_ETH_PRODUCER_Handle_t singleton_h;
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static int ipc_eth_ProducerRpMsgRxCallback(struct rpmsg_endpoint *ept, void *data, size_t len, uint32_t src, void *priv)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)ept;
|
||||
(void)src;
|
||||
|
||||
if(!priv)
|
||||
return 0;
|
||||
|
||||
size_t alignedLen = (((len+sizeof(void*)-1)/sizeof(void*))*sizeof(void*));
|
||||
|
||||
IPC_ETH_PRODUCER_Handle_t h = (IPC_ETH_PRODUCER_Handle_t)priv;
|
||||
if ( alignedLen >= sizeof(h->priv->tmp))
|
||||
return 0;
|
||||
|
||||
// this is an additional copy step as it would be when just using the message buffer.
|
||||
// its a worse idea at all but this helps overcoming an MPU region configuration, which
|
||||
// requires us to handle addresses aligned when accessing the shared D3 SRAM. other way
|
||||
// around would be to disable the MPU for the shared D3 region but i want to practice it
|
||||
// in the correct way as non buffered, non cached and shared region config which requires
|
||||
// us to handle it in aligned accesses at all. the message buffer has internal mechanism,
|
||||
// where this handling is not guaranteed at buffer turn around conditions...
|
||||
for( size_t i = 0; i < alignedLen/4; i++ ) {
|
||||
((uint32_t*)h->priv->tmp)[i] = ((uint32_t*)(data))[i];
|
||||
}
|
||||
xMessageBufferSend(h->priv->mbufH, h->priv->tmp, len, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static void ipc_eth_ProducerRpMsgUnbindCallback(struct rpmsg_endpoint *ept)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
if(ept->priv)
|
||||
{
|
||||
IPC_ETH_PRODUCER_Handle_t h = (IPC_ETH_PRODUCER_Handle_t)ept->priv;
|
||||
h->priv->running = 0;
|
||||
}
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static void ipc_eth_ProducerRpMsgNewEndpoint(struct rpmsg_device *rdev, const char *name, uint32_t dest)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)rdev;
|
||||
OPENAMP_create_endpoint(&singleton_h->priv->rp_endpoint, name, dest,
|
||||
ipc_eth_ProducerRpMsgRxCallback, ipc_eth_ProducerRpMsgUnbindCallback);
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
static void ipc_eth_ProducerTaskFunction( void * arg )
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
if(!arg)
|
||||
vTaskDelete(NULL);
|
||||
|
||||
IPC_ETH_PRODUCER_Handle_t h = (IPC_ETH_PRODUCER_Handle_t)arg;
|
||||
size_t bLen = 0;
|
||||
unsigned int currentPending = 0;
|
||||
unsigned int rounds = 0;
|
||||
unsigned int currentSeqID = 0;
|
||||
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
/*Take HSEM */
|
||||
HAL_HSEM_FastTake(0U);
|
||||
/*Release HSEM in order to notify the CPU2(CM4)*/
|
||||
HAL_HSEM_Release(0U,0);
|
||||
/* wait until CPU2 wakes up from stop mode */
|
||||
while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) == RESET)) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1));
|
||||
};
|
||||
|
||||
if (!h)
|
||||
goto error;
|
||||
|
||||
if (!h->priv)
|
||||
goto error;
|
||||
|
||||
OPENAMP_Wait_EndPointready(&h->priv->rp_endpoint);
|
||||
|
||||
// give the network stack i bit of time before starting all the troubles
|
||||
vTaskDelay(pdMS_TO_TICKS(6000));
|
||||
while(h->priv->running) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1));
|
||||
OPENAMP_check_for_message();
|
||||
|
||||
if ( (bLen = xMessageBufferReceive(h->priv->mbufH, h->priv->payload, sizeof(h->priv->payload), pdMS_TO_TICKS(0))) >= IPC_PKT_HEADERLEN) {
|
||||
if (currentPending > 0 )
|
||||
currentPending -= 1;
|
||||
|
||||
ipc_eth_packet_t *req = (ipc_eth_packet_t *)h->priv->payload;
|
||||
if (req->length <= (bLen - IPC_PKT_HEADERLEN)) {
|
||||
if (req->magic == IPC_PKT_CONTROL_TYPE && req->result == 0 && req->type == IPC_CTRL_TYPE_GETIPADDR) {
|
||||
memcpy(&h->priv->ipaddr, req->payload, sizeof(h->priv->ipaddr));
|
||||
}
|
||||
else if (req->magic == IPC_PKT_CONTROL_TYPE && req->result != 0 && req->type == IPC_CTRL_TYPE_GETIPADDR) {
|
||||
// in case IP address read was not valid, we will set Subnet and IP address back. this is used to indicate
|
||||
// missing connection or non functional stack on remote processor
|
||||
h->priv->subnet = 0;
|
||||
h->priv->ipaddr = 0;
|
||||
}
|
||||
else if (req->magic == IPC_PKT_CONTROL_TYPE && req->result == 0 && req->type == IPC_CTRL_TYPE_GETSUBNET) {
|
||||
memcpy(&h->priv->subnet, req->payload, sizeof(h->priv->subnet));
|
||||
}
|
||||
else if (req->magic == IPC_PKT_CONTROL_TYPE && req->result == 0 && req->type == IPC_CTRL_TYPE_GETPENDING &&
|
||||
h->callbacks.rxCtrlCallback != NULL) {
|
||||
int numRequests = req->length / (IPC_PKT_HEADERLEN + IPC_CTRLREMOTE_MAX_LENGTH);
|
||||
int index = 0;
|
||||
while(numRequests > 0) {
|
||||
ipc_eth_packet_t *sreq = (ipc_eth_packet_t *)&req->payload[index * (IPC_PKT_HEADERLEN + IPC_CTRLREMOTE_MAX_LENGTH)];
|
||||
if (sreq->magic == IPC_PKT_CONTROL_TYPE && sreq->result == 0 && sreq->type >= IPC_CTRLREMOTE_SPINDLE_START &&
|
||||
sreq->type <= IPC_CTRLREMOTE_STEP_MOVE) {
|
||||
h->callbacks.rxCtrlCallback(h, sreq, h->callbacks.rxCtrlPriv);
|
||||
}
|
||||
numRequests-=1;
|
||||
index+=1;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
|
||||
//TODO: don't know why but when more messages are pending, everything is destroyed and
|
||||
// ends up in hard faults caused by virtio structures and addresses
|
||||
// outside the shared mem region
|
||||
if(currentPending < 2) {
|
||||
if (xQueueReceive(h->priv->reqQH, ðernetPkt, 0) == pdPASS) {
|
||||
ethernetPkt.type = 0;
|
||||
ethernetPkt.magic = IPC_PKT_ETHERNET_TYPE;
|
||||
if ( OPENAMP_send(&h->priv->rp_endpoint, ðernetPkt, sizeof(ethernetPkt)) == 0 )
|
||||
currentPending += 1;
|
||||
currentSeqID += 1;
|
||||
}
|
||||
else if (rounds % 7 == 0) {
|
||||
getIPAddress.type = IPC_CTRL_TYPE_GETPENDING;
|
||||
getIPAddress.seqID = currentSeqID;
|
||||
if( OPENAMP_send(&h->priv->rp_endpoint, &getIPAddress, sizeof(getIPAddress)) == 0 )
|
||||
currentPending += 1;
|
||||
currentSeqID += 1;
|
||||
}
|
||||
if (rounds % 1000 == 0) {
|
||||
heartbeatPayload.seqID = currentSeqID;
|
||||
if ( OPENAMP_send(&h->priv->rp_endpoint, &heartbeatPayload, sizeof(heartbeatPayload)) == 0 )
|
||||
currentPending += 1;
|
||||
currentSeqID += 1;
|
||||
if ( h->callbacks.statusReqCallback != NULL ) {
|
||||
h->callbacks.statusReqCallback(h, h->callbacks.statusReqPriv);
|
||||
}
|
||||
}
|
||||
else if (rounds % 100 == 5) {
|
||||
if ( h->callbacks.statusReqCallback != NULL ) {
|
||||
h->callbacks.statusReqCallback(h, h->callbacks.statusReqPriv);
|
||||
}
|
||||
}
|
||||
else if (rounds % 1000 == 1) {
|
||||
getIPAddress.type = IPC_CTRL_TYPE_GETIPADDR;
|
||||
getIPAddress.seqID = currentSeqID;
|
||||
if ( OPENAMP_send(&h->priv->rp_endpoint, &getIPAddress, sizeof(getIPAddress)) == 0)
|
||||
currentPending += 1;
|
||||
currentSeqID += 1;
|
||||
}
|
||||
else if (rounds % 1000 == 2) {
|
||||
getIPAddress.type = IPC_CTRL_TYPE_GETSUBNET;
|
||||
getIPAddress.seqID = currentSeqID;
|
||||
if ( OPENAMP_send(&h->priv->rp_endpoint, &getIPAddress, sizeof(getIPAddress)) == 0 )
|
||||
currentPending += 1;
|
||||
currentSeqID += 1;
|
||||
}
|
||||
|
||||
rounds += 1;
|
||||
}
|
||||
|
||||
OPENAMP_check_for_message();
|
||||
}
|
||||
|
||||
error:
|
||||
OPENAMP_DeInit();
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
int IPC_ETH_PRODUCER_SendPaket(IPC_ETH_PRODUCER_Handle_t h, void* buff, int size)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
if ( h == NULL || buff == NULL || size <= 0 )
|
||||
return -1;
|
||||
|
||||
if ( h->priv == NULL || h->priv->reqQH == NULL )
|
||||
return -1;
|
||||
|
||||
ipc_eth_packet_t pkt = {
|
||||
.length = size,
|
||||
.magic = IPC_PKT_ETHERNET_TYPE,
|
||||
.seqID = 0,
|
||||
.type = 0,
|
||||
.result = 0,
|
||||
};
|
||||
|
||||
if(size > sizeof(pkt.payload))
|
||||
return -1;
|
||||
|
||||
memcpy(pkt.payload, buff, size);
|
||||
|
||||
return -(xQueueSend(h->priv->reqQH, &pkt, 0) == pdFALSE);
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
int IPC_ETH_PRODUCER_GetIPAddress(IPC_ETH_PRODUCER_Handle_t h, uint32_t *ipv4, uint32_t *subnet)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
if (h == NULL)
|
||||
return 0;
|
||||
|
||||
if (h->priv->ipaddr == 0)
|
||||
return 0;
|
||||
|
||||
if(ipv4)
|
||||
*ipv4 = h->priv->ipaddr;
|
||||
|
||||
if(subnet)
|
||||
*subnet = h->priv->subnet;
|
||||
|
||||
return 1;
|
||||
}
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
IPC_ETH_PRODUCER_Handle_t IPC_ETH_PRODUCER_Init(const char *endpoint)
|
||||
//---------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
IPC_ETH_PRODUCER_Handle_t h = NULL;
|
||||
int OpenAmpInit = 0;
|
||||
|
||||
if(!endpoint)
|
||||
goto error;
|
||||
|
||||
if(endpoint[0] == '\0')
|
||||
goto error;
|
||||
|
||||
if (MAILBOX_Init())
|
||||
goto error;
|
||||
|
||||
if(!(h = (IPC_ETH_PRODUCER_Handle_t)calloc(1, sizeof(struct IPC_ETH_PRODUCER_Handle))))
|
||||
goto error;
|
||||
|
||||
h->priv = (IPC_ETH_PRODUCER_Context_t)calloc(1, sizeof(struct IPC_ETH_PRODUCER_Context));
|
||||
if(!h->priv)
|
||||
goto error;
|
||||
|
||||
rpmsg_init_ept(&h->priv->rp_endpoint, endpoint, RPMSG_ADDR_ANY, RPMSG_ADDR_ANY, NULL, NULL);
|
||||
|
||||
// set this instance as private data
|
||||
h->priv->rp_endpoint.priv = h;
|
||||
singleton_h = h;
|
||||
|
||||
if (MX_OPENAMP_Init(RPMSG_MASTER, ipc_eth_ProducerRpMsgNewEndpoint) != 0) {
|
||||
goto error;
|
||||
}
|
||||
OpenAmpInit = 1;
|
||||
|
||||
if ((h->priv->mbufH = xMessageBufferCreate(4*IPC_PKT_MAXSIZE)) == NULL)
|
||||
goto error;
|
||||
|
||||
if ((h->priv->reqQH = xQueueCreate(4, sizeof(ethernetPkt))) == NULL)
|
||||
goto error;
|
||||
|
||||
h->priv->running = 1;
|
||||
if (pdPASS != xTaskCreate(ipc_eth_ProducerTaskFunction, "user2ipc", 4096, h, configMAX_PRIORITIES - 2, &h->priv->taskH))
|
||||
goto error;
|
||||
|
||||
return h;
|
||||
|
||||
error:
|
||||
if (h) {
|
||||
if(h->priv) {
|
||||
if(h->priv->taskH) {
|
||||
h->priv->running = 0;
|
||||
vTaskDelete(h->priv->taskH);
|
||||
}
|
||||
if(h->priv->rp_endpoint.priv == h) {
|
||||
// no abstraction for destroying, so calling library function directly
|
||||
rpmsg_destroy_ept(&h->priv->rp_endpoint);
|
||||
}
|
||||
if(h->priv->mbufH) {
|
||||
vMessageBufferDelete(h->priv->mbufH);
|
||||
}
|
||||
if(h->priv->reqQH) {
|
||||
vQueueDelete(h->priv->reqQH);
|
||||
}
|
||||
free(h->priv);
|
||||
}
|
||||
free(h);
|
||||
}
|
||||
h = NULL;
|
||||
|
||||
if ( OpenAmpInit )
|
||||
OPENAMP_DeInit();
|
||||
return h;
|
||||
}
|
||||
@@ -0,0 +1 @@
|
||||
used for symbolic linking or referencing from within IDEs, VSCode project is based on Makefiles and therefore this folder is not needed. It is more for CubeIDE Project structure!
|
||||
@@ -0,0 +1,779 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "openamp.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "queue.h"
|
||||
#include "stdio.h"
|
||||
#include "assert.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
#ifndef HSEM_ID_0
|
||||
#define HSEM_ID_0 (0U) /* HW semaphore 0*/
|
||||
#endif
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
SPI_HandleTypeDef hspi1;
|
||||
|
||||
TIM_HandleTypeDef htim2;
|
||||
|
||||
UART_HandleTypeDef huart3;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MPU_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_SPI1_Init(void);
|
||||
static void MX_TIM2_Init(void);
|
||||
static void MX_USART3_UART_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
extern void initialise_stdlib_abstraction( void );
|
||||
|
||||
void vApplicationMallocFailedHook( void )
|
||||
{
|
||||
taskDISABLE_INTERRUPTS();
|
||||
__asm volatile( "bkpt #0" );
|
||||
for (;;) {;}
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )
|
||||
{
|
||||
( void ) pcTaskName;
|
||||
( void ) pxTask;
|
||||
|
||||
taskDISABLE_INTERRUPTS();
|
||||
__asm volatile( "bkpt #0" );
|
||||
for (;;) {;}
|
||||
}
|
||||
|
||||
|
||||
static char myChar = 0;
|
||||
|
||||
QueueHandle_t uartRxQueue;
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
static void playgroundTask(void* args)
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)args;
|
||||
|
||||
printf("Hello World\r\n");
|
||||
|
||||
while(1) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1000));
|
||||
HAL_GPIO_TogglePin(LED_GREEN_GPIO_Port, LED_GREEN_Pin);
|
||||
}
|
||||
|
||||
vTaskDelete(xTaskGetCurrentTaskHandle());
|
||||
|
||||
}
|
||||
|
||||
static void playgroundTask2(void* args)
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)args;
|
||||
|
||||
printf("Hello World\r\n");
|
||||
|
||||
|
||||
while(1) {
|
||||
vTaskDelay(pdMS_TO_TICKS(2000));
|
||||
HAL_GPIO_TogglePin(LED_YELLOW_GPIO_Port, LED_YELLOW_Pin);
|
||||
}
|
||||
|
||||
vTaskDelete(xTaskGetCurrentTaskHandle());
|
||||
|
||||
}
|
||||
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
static int CapabilityFunc( int argc, char** argv, void* ctx )
|
||||
// --------------------------------------------------------------------------------------------------------------------
|
||||
{
|
||||
(void)argc;
|
||||
(void)argv;
|
||||
(void)ctx;
|
||||
printf("%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\r\nOK",
|
||||
0, // has spindle
|
||||
0, // has spindle status
|
||||
0, // has stepper
|
||||
0, // has stepper move relative
|
||||
0, // has stepper move speed
|
||||
0, // has stepper move async
|
||||
0, // has stepper status
|
||||
0, // has stepper refrun
|
||||
0, // has stepper refrun timeout
|
||||
0, // has stepper refrun skip
|
||||
0, // has stepper refrun stay enabled
|
||||
0, // has stepper reset
|
||||
0, // has stepper position
|
||||
0, // has stepper config
|
||||
0, // has stepper config torque
|
||||
0, // has stepper config throvercurr
|
||||
0, // has stepper config powerena
|
||||
0, // has stepper config stepmode
|
||||
0, // has stepper config timeoff
|
||||
0, // has stepper config timeon
|
||||
0, // has stepper config timefast
|
||||
0, // has stepper config mmperturn
|
||||
0, // has stepper config posmax
|
||||
0, // has stepper config posmin
|
||||
0, // has stepper config posref
|
||||
0, // has stepper config stepsperturn
|
||||
0 // has stepper cancel
|
||||
);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define BKPSRAM_BASE 0x38800000UL
|
||||
|
||||
typedef struct {
|
||||
uint32_t magic;
|
||||
uint32_t uuid[3];
|
||||
} device_shared_t;
|
||||
|
||||
#define DEVICE_SHARED \
|
||||
((volatile device_shared_t *)BKPSRAM_BASE)
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
__HAL_RCC_BKPRAM_CLK_ENABLE();
|
||||
// TODO: in case we have one of these special MCUs,
|
||||
// ask lecturer before commenting in this line!
|
||||
//RCC->GCR |= RCC_GCR_BOOT_C2;
|
||||
//HAL_PWREx_ReleaseCore(PWR_CORE_CPU2);
|
||||
HAL_PWR_EnableBkUpAccess();
|
||||
|
||||
FLASH_OBProgramInitTypeDef OptionsBytesStruct;
|
||||
//HAL_FLASHEx_EnableDebugger();
|
||||
HAL_FLASHEx_OBGetConfig(&OptionsBytesStruct);
|
||||
uint32_t prev = OptionsBytesStruct.USERConfig;
|
||||
#define BCM4 (1 << 22)
|
||||
#define BCM7 (1 << 23)
|
||||
#define nRST_STOP_D2 (1 << 24)
|
||||
#define nRST_STDY_D2 (1 << 25)
|
||||
if (!(OptionsBytesStruct.USERConfig & BCM4))
|
||||
OptionsBytesStruct.USERConfig |= BCM4;
|
||||
|
||||
if (!(OptionsBytesStruct.USERConfig & BCM7))
|
||||
OptionsBytesStruct.USERConfig |= BCM7;
|
||||
|
||||
if (!(OptionsBytesStruct.USERConfig & nRST_STOP_D2))
|
||||
OptionsBytesStruct.USERConfig |= nRST_STOP_D2;
|
||||
|
||||
if (!(OptionsBytesStruct.USERConfig & nRST_STDY_D2))
|
||||
OptionsBytesStruct.USERConfig |= nRST_STDY_D2;
|
||||
|
||||
if ( prev != OptionsBytesStruct.USERConfig) {
|
||||
// TODO: in case we have one of these special MCUs,
|
||||
// ask lecturer before commenting in this line!
|
||||
//HAL_FLASHEx_OBProgram(&OptionsBytesStruct);
|
||||
}
|
||||
|
||||
DEVICE_SHARED->uuid[0] = *(volatile uint32_t *)0x1FF1E800UL;
|
||||
DEVICE_SHARED->uuid[1] = *(volatile uint32_t *)0x1FF1E804UL;
|
||||
DEVICE_SHARED->uuid[2] = *(volatile uint32_t *)0x1FF1E808UL;
|
||||
|
||||
__DMB();
|
||||
|
||||
DEVICE_SHARED->magic = 0x48475531; // "HGU1"
|
||||
|
||||
__DMB();
|
||||
/* USER CODE END 1 */
|
||||
/* USER CODE BEGIN Boot_Mode_Sequence_0 */
|
||||
|
||||
/* USER CODE END Boot_Mode_Sequence_0 */
|
||||
|
||||
/* MPU Configuration--------------------------------------------------------*/
|
||||
MPU_Config();
|
||||
|
||||
/* USER CODE BEGIN Boot_Mode_Sequence_1 */
|
||||
/* Wait until CPU2 boots and enters in stop mode or timeout*/
|
||||
int timeout = 0xFFFF;
|
||||
while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) != RESET) && (timeout-- > 0));
|
||||
/*if ( timeout < 0 )
|
||||
{
|
||||
Error_Handler();
|
||||
}*/
|
||||
/* USER CODE END Boot_Mode_Sequence_1 */
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
/* USER CODE BEGIN Boot_Mode_Sequence_2 */
|
||||
|
||||
/* When system initialization is finished, Cortex-M7 will release Cortex-M4 by means of
|
||||
HSEM notification */
|
||||
|
||||
/*HW semaphore Clock enable*/
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
|
||||
/*Take HSEM */
|
||||
HAL_HSEM_FastTake(HSEM_ID_0);
|
||||
|
||||
/*Release HSEM in order to notify the CPU2(CM4)*/
|
||||
HAL_HSEM_Release(HSEM_ID_0,0);
|
||||
|
||||
/* wait until CPU2 wakes up from stop mode */
|
||||
while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) == RESET));
|
||||
/* USER CODE END Boot_Mode_Sequence_2 */
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_SPI1_Init();
|
||||
MX_TIM2_Init();
|
||||
MX_USART3_UART_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
// cretae a free rtos queue to buffer console characters received from debug uart
|
||||
uartRxQueue = xQueueCreate(64, sizeof(char));
|
||||
HAL_UART_Receive_IT(&huart3, (uint8_t *)&myChar, sizeof(myChar));
|
||||
|
||||
// create a playground task at the very beginning
|
||||
xTaskCreate(playgroundTask, "playground", 1024, NULL, 1, NULL);
|
||||
xTaskCreate(playgroundTask2, "playground2", 1024, NULL, 1, NULL);
|
||||
|
||||
// mask a compiler warning by referencing the function but not using it (void cast)
|
||||
(void)CapabilityFunc;
|
||||
|
||||
// start the scheduler and setup free rtos execution context
|
||||
vTaskStartScheduler();
|
||||
|
||||
// we should never reach that point!
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Supply configuration update enable
|
||||
*/
|
||||
HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY);
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 100;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SPI1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 0 */
|
||||
|
||||
/* USER CODE END SPI1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 1 */
|
||||
|
||||
/* USER CODE END SPI1_Init 1 */
|
||||
/* SPI1 parameter configuration*/
|
||||
hspi1.Instance = SPI1;
|
||||
hspi1.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
|
||||
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||||
hspi1.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
|
||||
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi1.Init.CRCPolynomial = 0x0;
|
||||
hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||
hspi1.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
|
||||
hspi1.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
|
||||
hspi1.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
||||
hspi1.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
||||
hspi1.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
|
||||
hspi1.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
|
||||
hspi1.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
|
||||
hspi1.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
|
||||
hspi1.Init.IOSwap = SPI_IO_SWAP_DISABLE;
|
||||
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI1_Init 2 */
|
||||
|
||||
/* USER CODE END SPI1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM2_Init 0 */
|
||||
|
||||
/* USER CODE END TIM2_Init 0 */
|
||||
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM2_Init 1 */
|
||||
|
||||
/* USER CODE END TIM2_Init 1 */
|
||||
htim2.Instance = TIM2;
|
||||
htim2.Init.Prescaler = 0;
|
||||
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim2.Init.Period = 9999;
|
||||
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM2_Init 2 */
|
||||
|
||||
/* USER CODE END TIM2_Init 2 */
|
||||
HAL_TIM_MspPostInit(&htim2);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART3 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART3_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 0 */
|
||||
|
||||
/* USER CODE END USART3_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 1 */
|
||||
|
||||
/* USER CODE END USART3_Init 1 */
|
||||
huart3.Instance = USART3;
|
||||
huart3.Init.BaudRate = 115200;
|
||||
huart3.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart3.Init.StopBits = UART_STOPBITS_1;
|
||||
huart3.Init.Parity = UART_PARITY_NONE;
|
||||
huart3.Init.Mode = UART_MODE_TX_RX;
|
||||
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
|
||||
huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
if (HAL_UART_Init(&huart3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART3_Init 2 */
|
||||
|
||||
/* USER CODE END USART3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOE, SPINDLE_ENA_L_Pin|SPINDLE_ENA_R_Pin|LED_YELLOW_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, LED_GREEN_Pin|LED_RED_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOD, STEP_SPI_CS_Pin|STEP_PULSE_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOG, STEP_RSTN_Pin|STEP_DIR_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : SPINDLE_ENA_L_Pin SPINDLE_ENA_R_Pin LED_YELLOW_Pin */
|
||||
GPIO_InitStruct.Pin = SPINDLE_ENA_L_Pin|SPINDLE_ENA_R_Pin|LED_YELLOW_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : USR_BUTTON_Pin */
|
||||
GPIO_InitStruct.Pin = USR_BUTTON_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(USR_BUTTON_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : SPINDLE_SI_R_Pin */
|
||||
GPIO_InitStruct.Pin = SPINDLE_SI_R_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(SPINDLE_SI_R_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : LED_GREEN_Pin LED_RED_Pin */
|
||||
GPIO_InitStruct.Pin = LED_GREEN_Pin|LED_RED_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : STEP_SPI_CS_Pin STEP_PULSE_Pin */
|
||||
GPIO_InitStruct.Pin = STEP_SPI_CS_Pin|STEP_PULSE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : STEP_RSTN_Pin STEP_DIR_Pin */
|
||||
GPIO_InitStruct.Pin = STEP_RSTN_Pin|STEP_DIR_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : STEP_FLAG_Pin */
|
||||
GPIO_InitStruct.Pin = STEP_FLAG_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(STEP_FLAG_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : REFERENCE_MARK_Pin LIMIT_SWITCH_Pin */
|
||||
GPIO_InitStruct.Pin = REFERENCE_MARK_Pin|LIMIT_SWITCH_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : SPINDLE_SI_L_Pin */
|
||||
GPIO_InitStruct.Pin = SPINDLE_SI_L_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(SPINDLE_SI_L_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
void vAssertCalled( const char * const pcFileName, unsigned long ulLine )
|
||||
{
|
||||
volatile uint32_t ulSetToNonZeroInDebuggerToContinue = 0;
|
||||
|
||||
/* Parameters are not used. */
|
||||
( void ) ulLine;
|
||||
( void ) pcFileName;
|
||||
|
||||
taskENTER_CRITICAL();
|
||||
{
|
||||
/* You can step out of this function to debug the assertion by using
|
||||
the debugger to set ulSetToNonZeroInDebuggerToContinue to a non-zero
|
||||
value. */
|
||||
while( ulSetToNonZeroInDebuggerToContinue == 0 )
|
||||
{
|
||||
}
|
||||
}
|
||||
taskEXIT_CRITICAL();
|
||||
}
|
||||
|
||||
int __stdout_put_char(int ch)
|
||||
{
|
||||
uint8_t val = ch;
|
||||
while((huart3.Instance->ISR & UART_FLAG_TXE) == 0);
|
||||
huart3.Instance->TDR = val;
|
||||
while((huart3.Instance->ISR & UART_FLAG_TC) == 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int __stdin_get_char(void)
|
||||
{
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED )
|
||||
{
|
||||
if (huart3.Instance->ISR & UART_FLAG_ORE)
|
||||
huart3.Instance->ICR = UART_CLEAR_OREF;
|
||||
|
||||
if (huart3.Instance->ISR & UART_FLAG_NE)
|
||||
huart3.Instance->ICR = UART_CLEAR_NEF;
|
||||
|
||||
if (huart3.Instance->ISR & UART_FLAG_FE)
|
||||
huart3.Instance->ICR = UART_CLEAR_FEF;
|
||||
|
||||
if ((huart3.Instance->ISR & UART_FLAG_RXNE) == 0) return -1;
|
||||
return huart3.Instance->RDR;
|
||||
}
|
||||
else
|
||||
{
|
||||
// we make sure that EOF is returned in case there is a small pause time
|
||||
// in the input sequence, therefore we do not block infinitely long!
|
||||
int value = EOF;
|
||||
if ( xQueueReceive(uartRxQueue, &value, 10 ) ) return value;
|
||||
else return EOF;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
|
||||
{
|
||||
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
||||
|
||||
if ( huart->Instance == USART3 )
|
||||
{
|
||||
if ( xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED )
|
||||
{
|
||||
xQueueSendFromISR(uartRxQueue, &myChar, &xHigherPriorityTaskWoken);
|
||||
portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
|
||||
}
|
||||
HAL_UART_Receive_IT(&huart3, (uint8_t *)&myChar, sizeof(myChar));
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
|
||||
{
|
||||
if ( huart->Instance == USART3 )
|
||||
{
|
||||
HAL_UART_Receive_IT(&huart3, (uint8_t *)&myChar, sizeof(myChar));
|
||||
}
|
||||
}
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/* MPU Configuration */
|
||||
|
||||
void MPU_Config(void)
|
||||
{
|
||||
MPU_Region_InitTypeDef MPU_InitStruct = {0};
|
||||
|
||||
/* Disables the MPU */
|
||||
HAL_MPU_Disable();
|
||||
|
||||
/** Initializes and configures the Region and the memory to be protected
|
||||
*/
|
||||
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
||||
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
|
||||
MPU_InitStruct.BaseAddress = 0x0;
|
||||
MPU_InitStruct.Size = MPU_REGION_SIZE_4GB;
|
||||
MPU_InitStruct.SubRegionDisable = 0x87;
|
||||
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
||||
MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS;
|
||||
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
|
||||
MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
|
||||
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
||||
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
||||
|
||||
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||
|
||||
/** Initializes and configures the Region and the memory to be protected
|
||||
*/
|
||||
MPU_InitStruct.Number = MPU_REGION_NUMBER1;
|
||||
MPU_InitStruct.BaseAddress = 0x38000000;
|
||||
MPU_InitStruct.Size = MPU_REGION_SIZE_64KB;
|
||||
MPU_InitStruct.SubRegionDisable = 0x0;
|
||||
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
|
||||
|
||||
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||
/* Enables the MPU */
|
||||
HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@@ -0,0 +1,868 @@
|
||||
/**
|
||||
* \file mvsyscall.c
|
||||
* \brief Wrappers required to use newlib malloc-family within FreeRTOS.
|
||||
* The syscalls for stdlib are implemented in a minimum way as well
|
||||
*
|
||||
* \par Overview
|
||||
* Route FreeRTOS memory management functions to newlib's malloc family.
|
||||
* Thus newlib and FreeRTOS share memory-management routines and memory pool,
|
||||
* and all newlib's internal memory-management requirements are supported.
|
||||
*
|
||||
* \author Dave Nadler
|
||||
* \author Thorsten Kimmel
|
||||
* \date 20-August-2019
|
||||
* \version 02-Dec-2021 implemented syscalls for stdlib
|
||||
* \version 27-Jun-2020 Correct "FreeRTOS.h" capitalization, commentary
|
||||
* \version 24-Jun-2020 commentary only
|
||||
* \version 11-Sep-2019 malloc accounting, comments, newlib version check
|
||||
*
|
||||
* \see http://www.nadler.com/embedded/newlibAndFreeRTOS.html
|
||||
* \see https://sourceware.org/newlib/libc.html#Reentrancy
|
||||
* \see https://sourceware.org/newlib/libc.html#malloc
|
||||
* \see https://sourceware.org/newlib/libc.html#index-_005f_005fenv_005flock
|
||||
* \see https://sourceware.org/newlib/libc.html#index-_005f_005fmalloc_005flock
|
||||
* \see https://sourceforge.net/p/freertos/feature-requests/72/
|
||||
* \see http://www.billgatliff.com/newlib.html
|
||||
* \see http://wiki.osdev.org/Porting_Newlib
|
||||
* \see http://www.embecosm.com/appnotes/ean9/ean9-howto-newlib-1.0.html
|
||||
*
|
||||
*
|
||||
* \copyright
|
||||
* (c) Dave Nadler 2017-2020, All Rights Reserved.
|
||||
* Web: http://www.nadler.com
|
||||
* email: drn@nadler.com
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Use or redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions, and the following disclaimer.
|
||||
*
|
||||
* - Use or redistributions of source code must retain ALL ORIGINAL COMMENTS, AND
|
||||
* ANY CHANGES MUST BE DOCUMENTED, INCLUDING:
|
||||
* - Reason for change (purpose)
|
||||
* - Functional change
|
||||
* - Date and author contact
|
||||
*
|
||||
* - Redistributions in binary form must reproduce the above copyright notice, this
|
||||
* list of conditions and the following disclaimer in the documentation and/or
|
||||
* other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*!
|
||||
* Includes
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <unistd.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
#include <newlib.h>
|
||||
#include <malloc.h>
|
||||
#include <FreeRTOS.h>
|
||||
|
||||
/*!
|
||||
* In case there is a FreeRTOS used for this application, we have to include
|
||||
* additional dependencies which are used in memory wrappers
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#ifdef INC_FREERTOS_H
|
||||
# include "task.h"
|
||||
# include "semphr.h"
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* conditional check to make sure this syscall abstraction and the memory
|
||||
* wrapper fits to the correct newlib / stdlib version
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#if (( __NEWLIB__ != 3) && ( __NEWLIB__ != 4 )) || ((__NEWLIB__ != 3) && (__NEWLIB_MINOR__ < 1)) || \
|
||||
((__NEWLIB__ == 3) && (__NEWLIB_MINOR__ > 3) )
|
||||
#warning "This wrapper was verified for newlib versions 3.1 - 3.3; please ensure newlib's external requirements for malloc-family are unchanged!"
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* conditional check to make sure the correct reentrancy configuration has been
|
||||
* set. Otherwise the stdlib calls could be lead to undefined behavior whenever
|
||||
* a function is called simultaneous by more than one thread
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#ifdef INC_FREERTOS_H
|
||||
# if !defined(configUSE_NEWLIB_REENTRANT) || (configUSE_NEWLIB_REENTRANT != 1)
|
||||
# error "#define configUSE_NEWLIB_REENTRANT 1 which is required for thread-safety of newlib sprintf, dtoa, strtok, etc..."
|
||||
# endif
|
||||
#endif
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef INC_FREERTOS_H
|
||||
// ----------------------------------------------------------------------------
|
||||
// The following functions are used to lock IRQs to make sure the newlib functions
|
||||
// can be used in an IRQ as well, this is not working as expected and so we disable it
|
||||
// for our platform so far, therefore we have to make sure the user can not enter newlib
|
||||
// functions when running in ISR context
|
||||
//! Disables interrupts (after saving prior state)
|
||||
# define NEWLIB_FUNCS_INSIDE_ISR 0
|
||||
# if defined(NEWLIB_FUNCS_INSIDE_ISR) && NEWLIB_FUNCS_INSIDE_ISR != 0
|
||||
define DRN_ENTER_CRITICAL_SECTION(_usis) { _usis = taskENTER_CRITICAL_FROM_ISR(); }
|
||||
# else
|
||||
# define DRN_ENTER_CRITICAL_SECTION(_usis) do { int insideAnISR = xPortIsInsideInterrupt(); configASSERT( !insideAnISR ); } while(0)
|
||||
# endif
|
||||
|
||||
//! Re-enables interrupts (unless already disabled prior taskENTER_CRITICAL)
|
||||
# if defined(NEWLIB_FUNCS_INSIDE_ISR) && NEWLIB_FUNCS_INSIDE_ISR != 0
|
||||
# define DRN_EXIT_CRITICAL_SECTION(_usis) { taskEXIT_CRITICAL_FROM_ISR(_usis); }
|
||||
# else
|
||||
# define DRN_EXIT_CRITICAL_SECTION(_usis)
|
||||
# endif
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
# define __HeapBase _end
|
||||
# define __HeapLimit _estack
|
||||
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC
|
||||
#define MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV
|
||||
|
||||
/*!
|
||||
* The symbols __HeapBase and __HeapLimit are defined to read the
|
||||
* heap parameters from symbols defined in the linker script. The
|
||||
* define macros above are used to adapt these names to the name
|
||||
* of the variable in the linker script. Both variables will be used
|
||||
* later to allocate and manage memory of the heap and to detect a
|
||||
* stack / heap crash...
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
extern char __HeapBase, __HeapLimit;
|
||||
|
||||
int _write( int file, char* ptr, int len );
|
||||
int _read( int file, char* ptr, int len );
|
||||
|
||||
/*!
|
||||
* The following semaphore is used to prevent the stdout and stderr device
|
||||
* to be accessed simultaneous while writing data. This is necessary because
|
||||
* the stdlib itself is thread safe and has its own buffers for a thread but
|
||||
* the access to the hardware must be locked as well
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
static SemaphoreHandle_t stdioSemaphore;
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
static SemaphoreHandle_t mallocSemaphore;
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
static SemaphoreHandle_t envSemaphore;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
/*!
|
||||
* pointer to array of char* strings that define the current
|
||||
* environment variables of the applications environment
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
#define xstr(a) str(a)
|
||||
#define str(a) #a
|
||||
#define NEWLIB_ENV "STDLIB=newlib-" xstr(__NEWLIB__) "." xstr(__NEWLIB_MINOR__)
|
||||
#ifdef NDEBUG
|
||||
# define DEBUG_ENV "DEBUG_ENV=RELEASE"
|
||||
#else
|
||||
# define DEBUG_ENV "DEBUG_ENV=DEBUG"
|
||||
#endif
|
||||
#define GNUC_ENV "GNUC=" xstr(__GNUC__) "." xstr(__GNUC_MINOR__)
|
||||
#define OS_VERSION_ENV "OSVERSION=" xstr(tskKERNEL_VERSION_MAJOR) "." xstr(tskKERNEL_VERSION_MINOR)
|
||||
static char* __env[] = { "ARCH=ARM32", "MCU=STM32F746ZI", "PLATFORM=ARM_FW_PLAYGROUND", "OS=FreeRTOS", "USERNAME=STM32",
|
||||
NEWLIB_ENV, OS_VERSION_ENV, GNUC_ENV, DEBUG_ENV, "BUILDTIME=" xstr(__TIME__), "BUILDDATE=" xstr(__DATE__),
|
||||
NULL
|
||||
};
|
||||
char** environ = &__env[0];
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable stdout channel which can be used
|
||||
* for debugging purposes in the application
|
||||
* \param chr
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __stdout_put_char( int chr );
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable stdin channel which can be used
|
||||
* for debugging purposes in the application
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) int __stdin_get_char( void )
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief is used to provide an overwritable clock tick function which is used
|
||||
* by the stdlib
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) unsigned long long __stdlib_get_system_clock_ticks( void )
|
||||
{
|
||||
#if defined(INC_FREERTOS_H)
|
||||
return (unsigned long long)xTaskGetTickCount();
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
/*!
|
||||
* \brief semihosting initialization function which should be called when _start
|
||||
* is called. afterwards main would be called.
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
void initialise_monitor_handles( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief this function will be called after initialization of the .bss, .text,
|
||||
* and .data segment of the application and while the stdlib begins to initialize
|
||||
* its requirements. This is done by calling the __libc_init_array in _start.S routine
|
||||
* before calling the main function. By tagging a function with the "constructor"
|
||||
* attribute, the compiler will add the function pointer to this initialization list.
|
||||
* \attention This is a GCC attribute. In case the application is compiled with another
|
||||
* compiler, this attribute must be ported as well!
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__((constructor))
|
||||
void initialise_stdlib_abstraction( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
initialise_monitor_handles();
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
stdioSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( stdioSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
mallocSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( mallocSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
envSemaphore = xSemaphoreCreateRecursiveMutex();
|
||||
|
||||
if ( envSemaphore == 0 )
|
||||
{
|
||||
vAssertCalled( __FILE__, __LINE__ );
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief returns the process ID (PID) of the calling process.
|
||||
* \attention we have no real OS and so we only return PID 1 because
|
||||
* this is the only running process. Everything is in "kernel space" or
|
||||
* "machine mode"
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _getpid( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief The command kill sends the specified signal to the specified
|
||||
* process.
|
||||
* \attention we have no real OS and so we cannot kill our only running
|
||||
* process with PID 1
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _kill( int pid, int sig )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )pid;
|
||||
( void )sig;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EINVAL;
|
||||
}
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief The command exit is used to stop the process or application
|
||||
* \attention if the application has called exit, we do must not return
|
||||
* from this function anymore
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( noreturn ) )
|
||||
void _exit ( int status )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
_kill( status, -1 );
|
||||
while ( 1 ) {}
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to read up to 'len' bytes from file descriptor 'file'
|
||||
* into the buffer starting at 'ptr'.
|
||||
* \note currently there is only support for stdin. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _read( int file, char* ptr, int len )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
int DataIdx;
|
||||
int resLen = 0;
|
||||
|
||||
if ( file == STDIN_FILENO )
|
||||
{
|
||||
for ( DataIdx = 0; DataIdx < len; )
|
||||
{
|
||||
int result = __stdin_get_char();
|
||||
if ( result == EOF )
|
||||
{
|
||||
if ( resLen == 0 )
|
||||
{
|
||||
resLen = EOF;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
*ptr++ = ( char )result;
|
||||
resLen++;
|
||||
DataIdx++;
|
||||
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EBADF;
|
||||
}
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
|
||||
return resLen;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to write 'len' bytes from file descriptor 'file'
|
||||
* out of the buffer starting at 'ptr'.
|
||||
* \note currently there is only support for stdout and stderr. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _write( int file, char* ptr, int len )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
int DataIdx, locked = 0;
|
||||
|
||||
if ( file == STDOUT_FILENO || file == STDERR_FILENO )
|
||||
{
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( stdioSemaphore, -1 );
|
||||
locked = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
if (file == STDERR_FILENO)
|
||||
{
|
||||
__stdout_put_char('\033');
|
||||
__stdout_put_char('[');
|
||||
__stdout_put_char('3');
|
||||
__stdout_put_char('1');
|
||||
__stdout_put_char('m');
|
||||
}
|
||||
for ( DataIdx = 0; DataIdx < len; DataIdx++ )
|
||||
{
|
||||
__stdout_put_char( ptr[DataIdx] );
|
||||
}
|
||||
if (file == STDERR_FILENO)
|
||||
{
|
||||
__stdout_put_char('\033');
|
||||
__stdout_put_char('[');
|
||||
__stdout_put_char('0');
|
||||
__stdout_put_char('m');
|
||||
}
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_STDOUT)
|
||||
if ( locked )
|
||||
{
|
||||
xSemaphoreGiveRecursive( stdioSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
return len;
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EBADF;
|
||||
}
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief attempts to close a descriptor.
|
||||
* \note currently there is no support for this function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _close( int file )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*!
|
||||
* \brief These function returns information about a file, in the buffer
|
||||
* pointed to by stat
|
||||
* \note currently there is only support for stdin/out/err function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _fstat( int file, struct stat* st )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
st->st_dev = file;
|
||||
st->st_size = 0;
|
||||
st->st_blocks = 0;
|
||||
|
||||
if ( file >= 1 && file <= 3 )
|
||||
{
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
else
|
||||
{
|
||||
st->st_mode = S_IFREG;
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*!
|
||||
* \brief checks wether a descriptor 'file' is a TTY device or not
|
||||
* \note currently there is only support for stdin/out/err function. If any other devices
|
||||
* have to be integrated as well, one should implement an abstraction layer
|
||||
* which delegates the calls directly to the required device or ressource.
|
||||
* An example can be seen in altera board support packages with the "dev" struct
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
int _isatty( int file )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
// is stdin, stdout or stderror
|
||||
if ( file >= 0 && file <= 2 )
|
||||
{
|
||||
return file;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _lseek( int file, int ptr, int dir )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
( void )ptr;
|
||||
( void )dir;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _open( char* path, int flags, ... )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )path;
|
||||
( void )flags;
|
||||
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _wait( int* status )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )status;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ECHILD;
|
||||
}
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _unlink( char* name )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )name;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOENT;
|
||||
}
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _times( struct tms* buf )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
buf->tms_utime = buf->tms_cutime = 0; // we have no user space!
|
||||
buf->tms_stime = buf->tms_cstime = __stdlib_get_system_clock_ticks( ); // everything runs in one process!
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _stat( char* file, struct stat* st )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )file;
|
||||
( void )st;
|
||||
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _link( char* old, char* new )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )old;
|
||||
( void )new;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EMLINK;
|
||||
}
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _fork( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = EAGAIN;
|
||||
}
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
int _execve( char* name, char** argv, char** env )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )env;
|
||||
( void )name;
|
||||
( void )argv;
|
||||
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOMEM;
|
||||
}
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// ================================================================================================
|
||||
// External routines required by newlib's malloc (sbrk/_sbrk, __malloc_lock/unlock)
|
||||
// ================================================================================================
|
||||
|
||||
#if !defined(INC_FREERTOS_H)
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
caddr_t _sbrk( int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
register char* stack_ptr asm( "sp" );
|
||||
|
||||
extern char end asm( "end" );
|
||||
static char* heap_end;
|
||||
char* prev_heap_end;
|
||||
|
||||
if ( heap_end == 0 )
|
||||
{
|
||||
heap_end = &end;
|
||||
}
|
||||
|
||||
prev_heap_end = heap_end;
|
||||
if ( heap_end + incr > stack_ptr )
|
||||
{
|
||||
// write(1, "Heap and stack collision\n", 25);
|
||||
// abort();
|
||||
if ( _impure_ptr != 0 )
|
||||
{
|
||||
_impure_ptr->_errno = ENOMEM;
|
||||
}
|
||||
errno = ENOMEM;
|
||||
return ( caddr_t ) -1;
|
||||
}
|
||||
|
||||
heap_end += incr;
|
||||
|
||||
return ( caddr_t ) prev_heap_end;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
static int heapBytesRemaining;
|
||||
static unsigned int stickyHeapBytesRemaining;
|
||||
uint32_t TotalHeapSize;
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
static UBaseType_t malLock_uxSavedInterruptStatus;
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void* _sbrk_r( struct _reent* pReent, int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )malLock_uxSavedInterruptStatus;
|
||||
( void )pReent;
|
||||
( void )incr;
|
||||
register char* stack_ptr asm( "sp" );
|
||||
|
||||
// make sure to calculate the correct heap size and bytes remaining at the first call!
|
||||
if( TotalHeapSize == 0 )
|
||||
{
|
||||
TotalHeapSize = heapBytesRemaining = stickyHeapBytesRemaining
|
||||
= ( int )( ( &__HeapLimit ) - ( &__HeapBase ) )
|
||||
#ifdef configISR_STACK_SIZE_WORDS
|
||||
- ( configISR_STACK_SIZE_WORDS * 4 )
|
||||
#endif
|
||||
;
|
||||
};
|
||||
static char* currentHeapEnd = &__HeapBase;
|
||||
char* limit = ( xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED ) ?
|
||||
stack_ptr : // Before scheduler is started, limit is stack pointer (risky!)
|
||||
&__HeapLimit
|
||||
#ifdef configISR_STACK_SIZE_WORDS
|
||||
- ( configISR_STACK_SIZE_WORDS * 4 )
|
||||
#endif
|
||||
; // Once running, OK to reuse all remaining RAM except ISR stack (MSP) stack
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
if ( currentHeapEnd + incr > limit )
|
||||
{
|
||||
// Ooops, no more memory available...
|
||||
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
|
||||
{
|
||||
extern void vApplicationMallocFailedHook( void );
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
vApplicationMallocFailedHook();
|
||||
}
|
||||
#elif defined(configHARD_STOP_ON_MALLOC_FAILURE)
|
||||
// If you want to alert debugger or halt...
|
||||
// WARNING: brkpt instruction may prevent watchdog operation...
|
||||
while( 1 )
|
||||
{
|
||||
__asm( "bkpt #0" );
|
||||
}; // Stop in GUI as if at a breakpoint (if debugging, otherwise loop forever)
|
||||
#else
|
||||
// Default, if you prefer to believe your application will gracefully trap out-of-memory...
|
||||
pReent->_errno = ENOMEM; // newlib's thread-specific errno
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
#endif
|
||||
return ( char* ) -1; // the malloc-family routine that called sbrk will return 0
|
||||
}
|
||||
|
||||
char* previousHeapEnd = currentHeapEnd;
|
||||
currentHeapEnd += incr;
|
||||
heapBytesRemaining -= incr;
|
||||
|
||||
// implement the statistical feature to provide the minimum free heap size feature
|
||||
// of FreeRTOS statistics
|
||||
if ( stickyHeapBytesRemaining > xPortGetFreeHeapSize() )
|
||||
{
|
||||
stickyHeapBytesRemaining = xPortGetFreeHeapSize();
|
||||
}
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
return ( char* ) previousHeapEnd;
|
||||
}
|
||||
|
||||
/*! \brief non-reentrant sbrk uses is actually reentrant by using current context
|
||||
* because the current _reent structure is pointed to by global _impure_ptr
|
||||
*/
|
||||
// ----------------------------------------------------------------------------
|
||||
void* sbrk( ptrdiff_t __incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return _sbrk_r( _impure_ptr, __incr );
|
||||
}
|
||||
|
||||
//! _sbrk is a synonym for sbrk.
|
||||
// ----------------------------------------------------------------------------
|
||||
char* _sbrk( int incr )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return sbrk( incr );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __malloc_lock( struct _reent* r )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )r;
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( mallocSemaphore, -1 );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __malloc_unlock( struct _reent* r )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
( void )r;
|
||||
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_MALLOC)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreGiveRecursive( mallocSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __env_lock( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreTakeRecursive( envSemaphore, -1 );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_ENTER_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
__attribute__( ( weak ) ) void __env_unlock( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
#if defined(INC_FREERTOS_H) && defined(MV_SYSCALL_USE_EXCLUSIVE_LOCK_FOR_ENV)
|
||||
if ( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
|
||||
{
|
||||
xSemaphoreGiveRecursive( envSemaphore );
|
||||
}
|
||||
#endif
|
||||
|
||||
DRN_EXIT_CRITICAL_SECTION( malLock_uxSavedInterruptStatus );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void* pvPortMalloc( size_t xSize )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
void* p = malloc( xSize );
|
||||
return p;
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
void vPortFree( void* pv )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
free( pv );
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
size_t xPortGetFreeHeapSize( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
static int lockGuard = 0;
|
||||
if ( lockGuard != 0 ) return stickyHeapBytesRemaining;
|
||||
lockGuard = 1;
|
||||
struct mallinfo mi = mallinfo();
|
||||
size_t result = mi.fordblks + heapBytesRemaining;
|
||||
lockGuard = 0;
|
||||
return result;
|
||||
|
||||
}
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
size_t xPortGetMinimumEverFreeHeapSize ( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return stickyHeapBytesRemaining;
|
||||
}
|
||||
|
||||
//! No implementation needed, but stub provided in case application already calls vPortInitialiseBlocks
|
||||
// ----------------------------------------------------------------------------
|
||||
void vPortInitialiseBlocks( void )
|
||||
// ----------------------------------------------------------------------------
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,333 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* Peripheral interrupt init */
|
||||
/* CM4_SEV_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(CM4_SEV_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(CM4_SEV_IRQn);
|
||||
/* HSEM1_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(HSEM1_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(HSEM1_IRQn);
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
if(hspi->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 0 */
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SPI1;
|
||||
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PB5 ------> SPI1_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = STEP_SPI_SCK_Pin|STEP_SPI_MISO_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = STEP_SPI_MOSI_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
||||
HAL_GPIO_Init(STEP_SPI_MOSI_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 1 */
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
if(hspi->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI1_CLK_DISABLE();
|
||||
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PB5 ------> SPI1_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, STEP_SPI_SCK_Pin|STEP_SPI_MISO_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(STEP_SPI_MOSI_GPIO_Port, STEP_SPI_MOSI_Pin);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM_Base MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
if(htim_base->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM2_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM2_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspInit 1 */
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(htim->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspPostInit 0 */
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**TIM2 GPIO Configuration
|
||||
PB10 ------> TIM2_CH3
|
||||
PB11 ------> TIM2_CH4
|
||||
*/
|
||||
GPIO_InitStruct.Pin = SPINDLE_PWM_L_Pin|SPINDLE_PWM_R_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspPostInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
/**
|
||||
* @brief TIM_Base MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
if(htim_base->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM2_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
if(huart->Instance==USART3)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART3_MspInit 0 */
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART3;
|
||||
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART3_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
/**USART3 GPIO Configuration
|
||||
PD8 ------> USART3_TX
|
||||
PD9 ------> USART3_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = DEBUG_UART_TX_Pin|DEBUG_UART_RX_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/* USART3 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART3_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
||||
/* USER CODE BEGIN USART3_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART3_MspInit 1 */
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
if(huart->Instance==USART3)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART3_CLK_DISABLE();
|
||||
|
||||
/**USART3 GPIO Configuration
|
||||
PD8 ------> USART3_TX
|
||||
PD9 ------> USART3_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOD, DEBUG_UART_TX_Pin|DEBUG_UART_RX_Pin);
|
||||
|
||||
/* USART3 interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
||||
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART3_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,256 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32h7xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern UART_HandleTypeDef huart3;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
#if 0
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
#endif
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
}
|
||||
#if 0
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
#endif
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
extern void xPortSysTickHandler( void );
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
xPortSysTickHandler();
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32H7xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32h7xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles USART3 global interrupt.
|
||||
*/
|
||||
void USART3_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART3_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart3);
|
||||
/* USER CODE BEGIN USART3_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART3_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CM4 send event interrupt for CM7.
|
||||
*/
|
||||
void CM4_SEV_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CM4_SEV_IRQn 0 */
|
||||
|
||||
/* USER CODE END CM4_SEV_IRQn 0 */
|
||||
/* USER CODE BEGIN CM4_SEV_IRQn 1 */
|
||||
|
||||
/* USER CODE END CM4_SEV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles HSEM1 global interrupt.
|
||||
*/
|
||||
void HSEM1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HSEM1_IRQn 0 */
|
||||
|
||||
/* USER CODE END HSEM1_IRQn 0 */
|
||||
HAL_HSEM_IRQHandler();
|
||||
/* USER CODE BEGIN HSEM1_IRQn 1 */
|
||||
|
||||
/* USER CODE END HSEM1_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,176 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file syscalls.c
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE Minimal System calls file
|
||||
*
|
||||
* For more information about which c-functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib libc-manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020-2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
|
||||
|
||||
/* Variables */
|
||||
extern int __io_putchar(int ch) __attribute__((weak));
|
||||
extern int __io_getchar(void) __attribute__((weak));
|
||||
|
||||
|
||||
char *__env[1] = { 0 };
|
||||
char **environ = __env;
|
||||
|
||||
|
||||
/* Functions */
|
||||
void initialise_monitor_handles()
|
||||
{
|
||||
}
|
||||
|
||||
int _getpid(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _kill(int pid, int sig)
|
||||
{
|
||||
(void)pid;
|
||||
(void)sig;
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
void _exit (int status)
|
||||
{
|
||||
_kill(status, -1);
|
||||
while (1) {} /* Make sure we hang here */
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _read(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
*ptr++ = __io_getchar();
|
||||
}
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _write(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
__io_putchar(*ptr++);
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
(void)file;
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
(void)file;
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
(void)file;
|
||||
(void)ptr;
|
||||
(void)dir;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _open(char *path, int flags, ...)
|
||||
{
|
||||
(void)path;
|
||||
(void)flags;
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _wait(int *status)
|
||||
{
|
||||
(void)status;
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _unlink(char *name)
|
||||
{
|
||||
(void)name;
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _times(struct tms *buf)
|
||||
{
|
||||
(void)buf;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _stat(char *file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _link(char *old, char *new)
|
||||
{
|
||||
(void)old;
|
||||
(void)new;
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fork(void)
|
||||
{
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _execve(char *name, char **argv, char **env)
|
||||
{
|
||||
(void)name;
|
||||
(void)argv;
|
||||
(void)env;
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
@@ -0,0 +1,79 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sysmem.c
|
||||
* @author Generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE System Memory calls file
|
||||
*
|
||||
* For more information about which C functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the newlib libc manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <errno.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/**
|
||||
* Pointer to the current high watermark of the heap usage
|
||||
*/
|
||||
static uint8_t *__sbrk_heap_end = NULL;
|
||||
|
||||
/**
|
||||
* @brief _sbrk() allocates memory to the newlib heap and is used by malloc
|
||||
* and others from the C library
|
||||
*
|
||||
* @verbatim
|
||||
* ############################################################################
|
||||
* # .data # .bss # newlib heap # MSP stack #
|
||||
* # # # # Reserved by _Min_Stack_Size #
|
||||
* ############################################################################
|
||||
* ^-- RAM start ^-- _end _estack, RAM end --^
|
||||
* @endverbatim
|
||||
*
|
||||
* This implementation starts allocating at the '_end' linker symbol
|
||||
* The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
|
||||
* The implementation considers '_estack' linker symbol to be RAM end
|
||||
* NOTE: If the MSP stack, at any point during execution, grows larger than the
|
||||
* reserved size, please increase the '_Min_Stack_Size'.
|
||||
*
|
||||
* @param incr Memory size
|
||||
* @return Pointer to allocated memory
|
||||
*/
|
||||
void *_sbrk(ptrdiff_t incr)
|
||||
{
|
||||
extern uint8_t _end; /* Symbol defined in the linker script */
|
||||
extern uint8_t _estack; /* Symbol defined in the linker script */
|
||||
extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
|
||||
const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
|
||||
const uint8_t *max_heap = (uint8_t *)stack_limit;
|
||||
uint8_t *prev_heap_end;
|
||||
|
||||
/* Initialize heap end at first call */
|
||||
if (NULL == __sbrk_heap_end)
|
||||
{
|
||||
__sbrk_heap_end = &_end;
|
||||
}
|
||||
|
||||
/* Protect heap from growing into the reserved MSP stack */
|
||||
if (__sbrk_heap_end + incr > max_heap)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return (void *)-1;
|
||||
}
|
||||
|
||||
prev_heap_end = __sbrk_heap_end;
|
||||
__sbrk_heap_end += incr;
|
||||
|
||||
return (void *)prev_heap_end;
|
||||
}
|
||||
@@ -0,0 +1,768 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32h755xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32H755xx Devices vector table for GCC based toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m7
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog Interrupt ( wwdg1_it, wwdg2_it) */
|
||||
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
|
||||
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
|
||||
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
|
||||
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
|
||||
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
|
||||
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word 0 /* Reserved */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FMC_IRQHandler /* FMC */
|
||||
.word SDMMC1_IRQHandler /* SDMMC1 */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt */
|
||||
.word CM7_SEV_IRQHandler /* CM7 Send event interrupt for CM4 */
|
||||
.word CM4_SEV_IRQHandler /* CM4 Send event interrupt for CM7 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word CRYP_IRQHandler /* Crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
.word UART7_IRQHandler /* UART7 */
|
||||
.word UART8_IRQHandler /* UART8 */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
.word SPI5_IRQHandler /* SPI5 */
|
||||
.word SPI6_IRQHandler /* SPI6 */
|
||||
.word SAI1_IRQHandler /* SAI1 */
|
||||
.word LTDC_IRQHandler /* LTDC */
|
||||
.word LTDC_ER_IRQHandler /* LTDC error */
|
||||
.word DMA2D_IRQHandler /* DMA2D */
|
||||
.word SAI2_IRQHandler /* SAI2 */
|
||||
.word QUADSPI_IRQHandler /* QUADSPI */
|
||||
.word LPTIM1_IRQHandler /* LPTIM1 */
|
||||
.word CEC_IRQHandler /* HDMI_CEC */
|
||||
.word I2C4_EV_IRQHandler /* I2C4 Event */
|
||||
.word I2C4_ER_IRQHandler /* I2C4 Error */
|
||||
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
|
||||
.word OTG_FS_EP1_OUT_IRQHandler /* USB OTG FS End Point 1 Out */
|
||||
.word OTG_FS_EP1_IN_IRQHandler /* USB OTG FS End Point 1 In */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
|
||||
.word HRTIM1_Master_IRQHandler /* HRTIM Master Timer global Interrupt */
|
||||
.word HRTIM1_TIMA_IRQHandler /* HRTIM Timer A global Interrupt */
|
||||
.word HRTIM1_TIMB_IRQHandler /* HRTIM Timer B global Interrupt */
|
||||
.word HRTIM1_TIMC_IRQHandler /* HRTIM Timer C global Interrupt */
|
||||
.word HRTIM1_TIMD_IRQHandler /* HRTIM Timer D global Interrupt */
|
||||
.word HRTIM1_TIME_IRQHandler /* HRTIM Timer E global Interrupt */
|
||||
.word HRTIM1_FLT_IRQHandler /* HRTIM Fault global Interrupt */
|
||||
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
|
||||
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
|
||||
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
|
||||
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
|
||||
.word SAI3_IRQHandler /* SAI3 global Interrupt */
|
||||
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
|
||||
.word TIM15_IRQHandler /* TIM15 global Interrupt */
|
||||
.word TIM16_IRQHandler /* TIM16 global Interrupt */
|
||||
.word TIM17_IRQHandler /* TIM17 global Interrupt */
|
||||
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
|
||||
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
|
||||
.word JPEG_IRQHandler /* JPEG global Interrupt */
|
||||
.word MDMA_IRQHandler /* MDMA global Interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
|
||||
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
|
||||
.word HSEM2_IRQHandler /* HSEM1 global Interrupt */
|
||||
.word ADC3_IRQHandler /* ADC3 global Interrupt */
|
||||
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
|
||||
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
|
||||
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
|
||||
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
|
||||
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
|
||||
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
|
||||
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
|
||||
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
|
||||
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
|
||||
.word COMP1_IRQHandler /* COMP1 global Interrupt */
|
||||
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
|
||||
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
|
||||
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
|
||||
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
|
||||
.word LPUART1_IRQHandler /* LP UART1 interrupt */
|
||||
.word WWDG_RST_IRQHandler /* Window Watchdog reset interrupt (exti_d2_wwdg_it, exti_d1_wwdg_it) */
|
||||
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
|
||||
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
|
||||
.word SAI4_IRQHandler /* SAI4 global interrupt */
|
||||
.word 0 /* Reserved */
|
||||
.word HOLD_CORE_IRQHandler /* Hold core interrupt */
|
||||
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
|
||||
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_AVD_IRQHandler
|
||||
.thumb_set PVD_AVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT0_IRQHandler
|
||||
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT0_IRQHandler
|
||||
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN1_IT1_IRQHandler
|
||||
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN2_IT1_IRQHandler
|
||||
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FMC_IRQHandler
|
||||
.thumb_set FMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC1_IRQHandler
|
||||
.thumb_set SDMMC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FDCAN_CAL_IRQHandler
|
||||
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
|
||||
|
||||
.weak CM7_SEV_IRQHandler
|
||||
.thumb_set CM7_SEV_IRQHandler,Default_Handler
|
||||
|
||||
.weak CM4_SEV_IRQHandler
|
||||
.thumb_set CM4_SEV_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRYP_IRQHandler
|
||||
.thumb_set CRYP_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART7_IRQHandler
|
||||
.thumb_set UART7_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART8_IRQHandler
|
||||
.thumb_set UART8_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI4_IRQHandler
|
||||
.thumb_set SPI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI5_IRQHandler
|
||||
.thumb_set SPI5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI6_IRQHandler
|
||||
.thumb_set SPI6_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI1_IRQHandler
|
||||
.thumb_set SAI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_IRQHandler
|
||||
.thumb_set LTDC_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_ER_IRQHandler
|
||||
.thumb_set LTDC_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2D_IRQHandler
|
||||
.thumb_set DMA2D_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI2_IRQHandler
|
||||
.thumb_set SAI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak QUADSPI_IRQHandler
|
||||
.thumb_set QUADSPI_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM1_IRQHandler
|
||||
.thumb_set LPTIM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_EV_IRQHandler
|
||||
.thumb_set I2C4_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_ER_IRQHandler
|
||||
.thumb_set I2C4_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPDIF_RX_IRQHandler
|
||||
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_FS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_FS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX1_OVR_IRQHandler
|
||||
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_Master_IRQHandler
|
||||
.thumb_set HRTIM1_Master_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMA_IRQHandler
|
||||
.thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMB_IRQHandler
|
||||
.thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMC_IRQHandler
|
||||
.thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMD_IRQHandler
|
||||
.thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIME_IRQHandler
|
||||
.thumb_set HRTIM1_TIME_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_FLT_IRQHandler
|
||||
.thumb_set HRTIM1_FLT_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT0_IRQHandler
|
||||
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT1_IRQHandler
|
||||
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT2_IRQHandler
|
||||
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DFSDM1_FLT3_IRQHandler
|
||||
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI3_IRQHandler
|
||||
.thumb_set SAI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SWPMI1_IRQHandler
|
||||
.thumb_set SWPMI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM15_IRQHandler
|
||||
.thumb_set TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM16_IRQHandler
|
||||
.thumb_set TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM17_IRQHandler
|
||||
.thumb_set TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_WKUP_IRQHandler
|
||||
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDIOS_IRQHandler
|
||||
.thumb_set MDIOS_IRQHandler,Default_Handler
|
||||
|
||||
.weak JPEG_IRQHandler
|
||||
.thumb_set JPEG_IRQHandler,Default_Handler
|
||||
|
||||
.weak MDMA_IRQHandler
|
||||
.thumb_set MDMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC2_IRQHandler
|
||||
.thumb_set SDMMC2_IRQHandler,Default_Handler
|
||||
|
||||
.weak HSEM1_IRQHandler
|
||||
.thumb_set HSEM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak HSEM2_IRQHandler
|
||||
.thumb_set HSEM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMAMUX2_OVR_IRQHandler
|
||||
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel0_IRQHandler
|
||||
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel1_IRQHandler
|
||||
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel2_IRQHandler
|
||||
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel3_IRQHandler
|
||||
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel4_IRQHandler
|
||||
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel5_IRQHandler
|
||||
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel6_IRQHandler
|
||||
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak BDMA_Channel7_IRQHandler
|
||||
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP1_IRQHandler
|
||||
.thumb_set COMP1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM2_IRQHandler
|
||||
.thumb_set LPTIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM3_IRQHandler
|
||||
.thumb_set LPTIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM4_IRQHandler
|
||||
.thumb_set LPTIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM5_IRQHandler
|
||||
.thumb_set LPTIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPUART1_IRQHandler
|
||||
.thumb_set LPUART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak WWDG_RST_IRQHandler
|
||||
.thumb_set WWDG_RST_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRS_IRQHandler
|
||||
.thumb_set CRS_IRQHandler,Default_Handler
|
||||
|
||||
.weak ECC_IRQHandler
|
||||
.thumb_set ECC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI4_IRQHandler
|
||||
.thumb_set SAI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak HOLD_CORE_IRQHandler
|
||||
.thumb_set HOLD_CORE_IRQHandler,Default_Handler
|
||||
|
||||
.weak WAKEUP_PIN_IRQHandler
|
||||
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
Whitespace-only changes.
@@ -0,0 +1,205 @@
|
||||
##########################################################################################################################
|
||||
# Author: Thorsten Kimmel
|
||||
# Project: DHBW-Embedded-Systems-TES
|
||||
##########################################################################################################################
|
||||
|
||||
# ------------------------------------------------
|
||||
# Generic Makefile (based on gcc)
|
||||
#
|
||||
# ChangeLog :
|
||||
# 2026-09-25 - first version
|
||||
# ------------------------------------------------
|
||||
|
||||
######################################
|
||||
# target
|
||||
######################################
|
||||
TARGET = Stepper-H7-CM7
|
||||
|
||||
|
||||
MK_CORE := M7
|
||||
LDFLAGS :=
|
||||
CFLAGS :=
|
||||
C_SOURCES :=
|
||||
C_INCLUDES :=
|
||||
ASM_SOURCES :=
|
||||
C_DEFS :=
|
||||
AS_DEFS :=
|
||||
|
||||
# cpu
|
||||
CPU = -mcpu=cortex-m7
|
||||
|
||||
#######################################
|
||||
# additional common includes
|
||||
#######################################
|
||||
include ../common.mk
|
||||
|
||||
|
||||
######################################
|
||||
# building variables
|
||||
######################################
|
||||
# debug build? 1 = -g, 2 = -g3
|
||||
DEBUG = 2
|
||||
# optimization
|
||||
OPT = -O0
|
||||
# stack size limit of single function (warning)
|
||||
SLIMIT = 2048
|
||||
|
||||
#######################################
|
||||
# paths
|
||||
#######################################
|
||||
# Build path
|
||||
BUILD_DIR = build
|
||||
|
||||
######################################
|
||||
# source
|
||||
######################################
|
||||
# C sources
|
||||
C_SOURCES += Core/Src/main.c \
|
||||
Core/Src/newlib_abs.c \
|
||||
Core/Src/stm32h7xx_hal_msp.c \
|
||||
Core/Src/stm32h7xx_it.c \
|
||||
$(wildcard Core/Src/Console/*.c) \
|
||||
$(wildcard Core/Src/IPC/*.c) \
|
||||
$(wildcard Core/Src/Spindle/*.c) \
|
||||
$(wildcard Core/Src/Stepper/*.c) \
|
||||
$(wildcard OPENAMP/*.c) \
|
||||
|
||||
|
||||
|
||||
# ASM sources
|
||||
ASM_SOURCES += Core/Startup/startup_stm32h755zitx.s
|
||||
|
||||
|
||||
#######################################
|
||||
# CFLAGS
|
||||
#######################################
|
||||
|
||||
# fpu
|
||||
# NONE for Cortex-M0/M0+/M3
|
||||
|
||||
# float-abi
|
||||
FPU = -mfpu=fpv5-d16
|
||||
FLOAT-ABI = -mfloat-abi=hard
|
||||
|
||||
# mcu
|
||||
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
|
||||
|
||||
# macros for gcc
|
||||
# AS defines
|
||||
AS_DEFS +=
|
||||
|
||||
# C defines
|
||||
C_DEFS += -DCORE_CM7 \
|
||||
-DDEBUG \
|
||||
-DVIRTIO_MASTER_ONLY
|
||||
|
||||
# AS includes
|
||||
AS_INCLUDES +=
|
||||
|
||||
# C includes
|
||||
C_INCLUDES += -ICore/Inc \
|
||||
-ICore/Inc/Console \
|
||||
-ICore/Inc/IPC \
|
||||
-ICore/Inc/Spindle \
|
||||
-ICore/Inc/Stepper \
|
||||
-IOPENAMP
|
||||
|
||||
# compile gcc flags
|
||||
ASFLAGS += $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -fstack-usage -Wstack-usage=$(SLIMIT) -Wno-unused-parameter -Wall -Wextra -Wundef -Wshadow -fno-common -fdata-sections -ffunction-sections
|
||||
|
||||
CFLAGS += $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -fstack-usage -Wstack-usage=$(SLIMIT) -Wno-unused-parameter -Wall -Wextra -Wundef -Wshadow -fno-common -fdata-sections -ffunction-sections
|
||||
|
||||
ifeq ($(DEBUG), 1)
|
||||
CFLAGS += -g -gdwarf-2
|
||||
endif
|
||||
ifeq ($(DEBUG), 2)
|
||||
CFLAGS += -g3 -gdwarf-2
|
||||
endif
|
||||
|
||||
|
||||
ifeq ($(OS),Windows_NT)
|
||||
EXEPOSTFIX = .exe
|
||||
else
|
||||
EXEPOSTFIX =
|
||||
endif
|
||||
|
||||
|
||||
|
||||
#######################################
|
||||
# LDFLAGS
|
||||
#######################################
|
||||
# link script
|
||||
LDSCRIPT = STM32H755ZITX_FLASH.ld
|
||||
|
||||
# libraries
|
||||
LIBS = -lc -lm -lnosys
|
||||
LIBDIR =
|
||||
# -specs=nano.specs
|
||||
LDFLAGS += -lc -lrdimon -u _printf_float -Wa,-adhln -g $(MCU) -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref,--gc-sections
|
||||
|
||||
|
||||
# default action: build all
|
||||
.PHONY: all
|
||||
all: $(BUILD_DIR)/$(TARGET).elf #$(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin $(BUILD_DIR)/$(TARGET).S
|
||||
|
||||
#######################################
|
||||
# build the application
|
||||
#######################################
|
||||
# list of objects
|
||||
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
|
||||
vpath %.c $(sort $(dir $(C_SOURCES)))
|
||||
# list of ASM program objects
|
||||
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
|
||||
vpath %.s $(sort $(dir $(ASM_SOURCES)))
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-CC $<"
|
||||
@$(CC)$(EXEPOSTFIX) -c $(CFLAGS) -MMD -MP -MF"$(@:%.o=%.d)" $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-AS $<"
|
||||
@$(AS)$(EXEPOSTFIX) -c $(CFLAGS) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
|
||||
@echo " $(MK_CORE)-ELF $(BUILD_DIR)/$(TARGET).elf"
|
||||
@$(CC)$(EXEPOSTFIX) $(OBJECTS) $(LDFLAGS) -o $@
|
||||
@$(SZ)$(EXEPOSTFIX) $@
|
||||
|
||||
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
@$(HEX)$(EXEPOSTFIX) $< $@
|
||||
|
||||
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
@$(BIN)$(EXEPOSTFIX) $< $@
|
||||
|
||||
$(BUILD_DIR)/%.S: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||
@echo " $(MK_CORE)-OBJ $<"
|
||||
$(OD)$(EXEPOSTFIX) -l -m armv7e-m --disassemble-all $< > $@
|
||||
|
||||
$(BUILD_DIR):
|
||||
mkdir $@
|
||||
|
||||
#######################################
|
||||
# clean up
|
||||
#######################################
|
||||
clean:
|
||||
-rm -fR $(BUILD_DIR)
|
||||
|
||||
|
||||
#######################################
|
||||
# clean up
|
||||
#######################################
|
||||
setup:
|
||||
@echo 'installation only works on linux and on linux subsystem for windows 10'
|
||||
@sudo apt-get update
|
||||
@sudo apt-get install clang clang-tools gcc-multilib g++-multilib build-essential gcc-arm-none-eabi binutils-arm-none-eabi -y
|
||||
|
||||
#######################################
|
||||
# dependencies
|
||||
#######################################
|
||||
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||
|
||||
include ../sca.mk
|
||||
|
||||
# *** EOF ***
|
||||
Whitespace-only changes.
@@ -0,0 +1,213 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : mbox_hsem.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the mailbox based on hardware semaphore.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "openamp/open_amp.h"
|
||||
#include "stm32h7xx_hal.h"
|
||||
#include "openamp_conf.h"
|
||||
#include "mbox_hsem.h"
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
#define RX_NO_MSG 0
|
||||
#define RX_NEW_MSG 1
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
static uint32_t msg_received = RX_NO_MSG;
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
void HAL_HSEM_FreeCallback(uint32_t SemMask)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN HSEM_FREE_CALLBACK */
|
||||
|
||||
/* USER CODE END HSEM_FREE_CALLBACK */
|
||||
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(SemMask);
|
||||
msg_received = RX_NEW_MSG;
|
||||
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
/* USER CODE END PRE_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_1));
|
||||
|
||||
/* USER CODE BEGIN POST_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
/* USER CODE END POST_HSEM_FREE_CALLBACK_CM7 */
|
||||
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
/* USER CODE END PRE_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
|
||||
/* USER CODE BEGIN POST_HSEM_FREE_CALLBACK_CM4 */
|
||||
|
||||
/* USER CODE END POST_HSEM_FREE_CALLBACK_CM4 */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize MAILBOX with HSEM peripheral
|
||||
* @param None
|
||||
* @retval : Operation result
|
||||
*/
|
||||
int MAILBOX_Init(void)
|
||||
{
|
||||
/* USER CODE BEGIN MAILBOX_INIT */
|
||||
|
||||
/* USER CODE END MAILBOX_INIT */
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_INIT_CM7 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_INIT_CM7 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_1));
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_INIT_CM7 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_INIT_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_INIT_CM4 */
|
||||
|
||||
/* USER CODE END MAILBOX_INIT_CM4 */
|
||||
|
||||
HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_INIT_CM4 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_INIT_CM4 */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize MAILBOX with HSEM peripheral
|
||||
* @param virtio device
|
||||
* @retval : Operation result
|
||||
*/
|
||||
int MAILBOX_Poll(struct virtio_device *vdev)
|
||||
{
|
||||
/* If we got an interrupt, ask for the corresponding virtqueue processing */
|
||||
|
||||
if (msg_received == RX_NEW_MSG)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN NEW_MSG */
|
||||
|
||||
/* USER CODE END NEW_MSG */
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_NEW_MSG_CM7 */
|
||||
|
||||
/* USER CODE END PRE_NEW_MSG_CM7 */
|
||||
|
||||
rproc_virtio_notified(vdev, VRING0_ID);
|
||||
|
||||
/* USER CODE BEGIN POST_NEW_MSG_CM7 */
|
||||
|
||||
/* USER CODE END POST_NEW_MSG_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_NEW_MSG_CM4 */
|
||||
|
||||
/* USER CODE END PRE_NEW_MSG_CM4 */
|
||||
|
||||
rproc_virtio_notified(vdev, VRING1_ID);
|
||||
|
||||
/* USER CODE BEGIN POST_NEW_MSG_CM4 */
|
||||
|
||||
/* USER CODE END POST_NEW_MSG_CM4 */
|
||||
#endif
|
||||
msg_received = RX_NO_MSG;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN NO_MSG */
|
||||
|
||||
/* USER CODE END NO_MSG */
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Callback function called by OpenAMP MW to notify message processing
|
||||
* @param VRING id
|
||||
* @retval Operation result
|
||||
*/
|
||||
int MAILBOX_Notify(void *priv, uint32_t id)
|
||||
{
|
||||
(void)priv;
|
||||
(void)id;
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_NOTIFY*/
|
||||
|
||||
/* USER CODE END MAILBOX_NOTIFY */
|
||||
#ifdef CORE_CM7
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_NOTIFY_CM7 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_NOTIFY_CM7 */
|
||||
HAL_HSEM_FastTake(HSEM_ID_0);
|
||||
HAL_HSEM_Release(HSEM_ID_0,0);
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_NOTIFY_CM7 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_NOTIFY_CM7 */
|
||||
#endif
|
||||
#ifdef CORE_CM4
|
||||
|
||||
/* USER CODE BEGIN PRE_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
/* USER CODE END PRE_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
HAL_HSEM_FastTake(HSEM_ID_1);
|
||||
HAL_HSEM_Release(HSEM_ID_1,0);
|
||||
|
||||
/* USER CODE BEGIN POST_MAILBOX_NOTIFY_CM4 */
|
||||
|
||||
/* USER CODE END POST_MAILBOX_NOTIFY_CM4 */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file mabox_hsem.h
|
||||
* @author MCD Application Team
|
||||
* @brief header for mbox_hsem.c module
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef MBOX_HSEM_H_
|
||||
#define MBOX_HSEM_H_
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#define HSEM_ID_0 0 /* CM7 to CM4 Notification */
|
||||
#define HSEM_ID_1 1 /* CM4 to CM7 Notification */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
int MAILBOX_Notify(void *priv, uint32_t id);
|
||||
int MAILBOX_Init(void);
|
||||
int MAILBOX_Poll(struct virtio_device *vdev);
|
||||
|
||||
#endif /* MBOX_HSEM_H_ */
|
||||
@@ -0,0 +1,285 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp.c
|
||||
* @author MCD Application Team
|
||||
* @brief Code for openamp applications
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
#include "openamp.h"
|
||||
#include "rsc_table.h"
|
||||
#include "metal/sys.h"
|
||||
#include "metal/device.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
#define SHM_DEVICE_NAME "STM32_SHM"
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
static struct metal_io_region *shm_io;
|
||||
static struct metal_io_region *rsc_io;
|
||||
static struct shared_resource_table *rsc_table;
|
||||
static struct rpmsg_virtio_shm_pool shpool;
|
||||
static struct rpmsg_virtio_device rvdev;
|
||||
|
||||
static metal_phys_addr_t shm_physmap;
|
||||
|
||||
struct metal_device shm_device = {
|
||||
.name = SHM_DEVICE_NAME,
|
||||
.num_regions = 2,
|
||||
.regions = {
|
||||
{.virt = NULL}, /* shared memory */
|
||||
{.virt = NULL}, /* rsc_table memory */
|
||||
},
|
||||
.node = { NULL },
|
||||
.irq_num = 0,
|
||||
.irq_info = NULL
|
||||
};
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
static int OPENAMP_shmem_init(int RPMsgRole)
|
||||
{
|
||||
int status = 0;
|
||||
struct metal_device *device = NULL;
|
||||
struct metal_init_params metal_params = METAL_INIT_DEFAULTS;
|
||||
void* rsc_tab_addr = NULL;
|
||||
int rsc_size = 0;
|
||||
|
||||
/* USER CODE BEGIN PRE_LIB_METAL_INIT */
|
||||
|
||||
/* USER CODE END PRE_LIB_METAL_INIT */
|
||||
metal_init(&metal_params);
|
||||
|
||||
status = metal_register_generic_device(&shm_device);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = metal_device_open("generic", SHM_DEVICE_NAME, &device);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
shm_physmap = SHM_START_ADDRESS;
|
||||
metal_io_init(&device->regions[0], (void *)SHM_START_ADDRESS, &shm_physmap,
|
||||
SHM_SIZE, -1, 0, NULL);
|
||||
|
||||
/* USER CODE BEGIN PRE_SHM_IO_INIT */
|
||||
|
||||
/* USER CODE END PRE_SHM_IO_INIT */
|
||||
shm_io = metal_device_io_region(device, 0);
|
||||
if (shm_io == NULL) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_SHM_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_SHM_IO_INIT */
|
||||
|
||||
/* Initialize resources table variables */
|
||||
resource_table_init(RPMsgRole, &rsc_tab_addr, &rsc_size);
|
||||
rsc_table = (struct shared_resource_table *)rsc_tab_addr;
|
||||
if (!rsc_table)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_RSC_TABLE_INIT */
|
||||
|
||||
/* USER CODE END POST_RSC_TABLE_INIT */
|
||||
|
||||
metal_io_init(&device->regions[1], rsc_table,
|
||||
(metal_phys_addr_t *)rsc_table, rsc_size, -1U, 0, NULL);
|
||||
|
||||
/* USER CODE BEGIN POST_METAL_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_METAL_IO_INIT */
|
||||
rsc_io = metal_device_io_region(device, 1);
|
||||
if (rsc_io == NULL) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_RSC_IO_INIT */
|
||||
|
||||
/* USER CODE END POST_RSC_IO_INIT */
|
||||
return 0;
|
||||
}
|
||||
|
||||
int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb)
|
||||
{
|
||||
struct fw_rsc_vdev_vring *vring_rsc = NULL;
|
||||
struct virtio_device *vdev = NULL;
|
||||
int status = 0;
|
||||
|
||||
/* USER CODE BEGIN MAILBOX_Init */
|
||||
|
||||
/* USER CODE END MAIL_BOX_Init */
|
||||
|
||||
MAILBOX_Init();
|
||||
|
||||
/* Libmetal Initilalization */
|
||||
status = OPENAMP_shmem_init(RPMsgRole);
|
||||
if(status)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN PRE_VIRTIO_INIT */
|
||||
|
||||
/* USER CODE END PRE_VIRTIO_INIT */
|
||||
vdev = rproc_virtio_create_vdev(RPMsgRole, VDEV_ID, &rsc_table->vdev,
|
||||
rsc_io, NULL, MAILBOX_Notify, NULL);
|
||||
if (vdev == NULL)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
rproc_virtio_wait_remote_ready(vdev);
|
||||
|
||||
/* USER CODE BEGIN POST_VIRTIO_INIT */
|
||||
|
||||
/* USER CODE END POST_VIRTIO_INIT */
|
||||
vring_rsc = &rsc_table->vring0;
|
||||
status = rproc_virtio_init_vring(vdev, 0, vring_rsc->notifyid,
|
||||
(void *)vring_rsc->da, shm_io,
|
||||
vring_rsc->num, vring_rsc->align);
|
||||
if (status != 0)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_VRING0_INIT */
|
||||
|
||||
/* USER CODE END POST_VRING0_INIT */
|
||||
vring_rsc = &rsc_table->vring1;
|
||||
status = rproc_virtio_init_vring(vdev, 1, vring_rsc->notifyid,
|
||||
(void *)vring_rsc->da, shm_io,
|
||||
vring_rsc->num, vring_rsc->align);
|
||||
if (status != 0)
|
||||
{
|
||||
return status;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN POST_VRING1_INIT */
|
||||
|
||||
/* USER CODE END POST_VRING1_INIT */
|
||||
|
||||
rpmsg_virtio_init_shm_pool(&shpool, (void *)VRING_BUFF_ADDRESS,
|
||||
(size_t)SHM_SIZE);
|
||||
rpmsg_init_vdev(&rvdev, vdev, ns_bind_cb, shm_io, &shpool);
|
||||
|
||||
/* USER CODE BEGIN POST_RPMSG_INIT */
|
||||
|
||||
/* USER CODE END POST_RPMSG_INIT */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void OPENAMP_DeInit()
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN PRE_OPENAMP_DEINIT */
|
||||
|
||||
/* USER CODE END PRE_OPENAMP_DEINIT */
|
||||
|
||||
rpmsg_deinit_vdev(&rvdev);
|
||||
|
||||
metal_finish();
|
||||
|
||||
/* USER CODE BEGIN POST_OPENAMP_DEINIT */
|
||||
|
||||
/* USER CODE END POST_OPENAMP_DEINIT */
|
||||
}
|
||||
|
||||
void OPENAMP_init_ept(struct rpmsg_endpoint *ept)
|
||||
{
|
||||
/* USER CODE BEGIN PRE_EP_INIT */
|
||||
|
||||
/* USER CODE END PRE_EP_INIT */
|
||||
|
||||
rpmsg_init_ept(ept, "", RPMSG_ADDR_ANY, RPMSG_ADDR_ANY, NULL, NULL);
|
||||
|
||||
/* USER CODE BEGIN POST_EP_INIT */
|
||||
|
||||
/* USER CODE END POST_EP_INIT */
|
||||
}
|
||||
|
||||
int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
|
||||
uint32_t dest, rpmsg_ept_cb cb,
|
||||
rpmsg_ns_unbind_cb unbind_cb)
|
||||
{
|
||||
int ret = 0;
|
||||
/* USER CODE BEGIN PRE_EP_CREATE */
|
||||
|
||||
/* USER CODE END PRE_EP_CREATE */
|
||||
|
||||
ret = rpmsg_create_ept(ept, &rvdev.rdev, name, RPMSG_ADDR_ANY, dest, cb,
|
||||
unbind_cb);
|
||||
|
||||
/* USER CODE BEGIN POST_EP_CREATE */
|
||||
|
||||
/* USER CODE END POST_EP_CREATE */
|
||||
return ret;
|
||||
}
|
||||
|
||||
void OPENAMP_check_for_message(void)
|
||||
{
|
||||
/* USER CODE BEGIN MSG_CHECK */
|
||||
|
||||
/* USER CODE END MSG_CHECK */
|
||||
MAILBOX_Poll(rvdev.vdev);
|
||||
}
|
||||
|
||||
void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept)
|
||||
{
|
||||
/* USER CODE BEGIN EP_READY */
|
||||
|
||||
/* USER CODE END EP_READY */
|
||||
|
||||
while(!is_rpmsg_ept_ready(rp_ept))
|
||||
{
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
MAILBOX_Poll(rvdev.vdev);
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING) {
|
||||
vTaskDelay(pdMS_TO_TICKS(1));
|
||||
}
|
||||
/* USER CODE END 1 */
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,87 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp.h
|
||||
* @brief Header for openamp applications
|
||||
* @author MCD Application Team
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __openamp_H
|
||||
#define __openamp_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "openamp/open_amp.h"
|
||||
#include "openamp_conf.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#define OPENAMP_send rpmsg_send
|
||||
#define OPENAMP_destroy_ept rpmsg_destroy_ept
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Initialize the openamp framework*/
|
||||
int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb);
|
||||
|
||||
/* Deinitialize the openamp framework*/
|
||||
void OPENAMP_DeInit(void);
|
||||
|
||||
/* Initialize the endpoint struct*/
|
||||
void OPENAMP_init_ept(struct rpmsg_endpoint *ept);
|
||||
|
||||
/* Create and register the endpoint */
|
||||
int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
|
||||
uint32_t dest, rpmsg_ept_cb cb,
|
||||
rpmsg_ns_unbind_cb unbind_cb);
|
||||
|
||||
/* Check for new rpmsg reception */
|
||||
void OPENAMP_check_for_message(void);
|
||||
|
||||
/* Wait loop on endpoint ready ( message dest address is know)*/
|
||||
void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__openamp_H */
|
||||
|
||||
@@ -0,0 +1,251 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file openamp_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief Configuration file for OpenAMP MW
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#if defined(METAL_MAX_DEVICE_REGIONS)
|
||||
# undef METAL_MAX_DEVICE_REGIONS
|
||||
# define METAL_MAX_DEVICE_REGIONS 32
|
||||
#endif
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __OPENAMP_CONF__H__
|
||||
#define __OPENAMP_CONF__H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
|
||||
#include "openamp_log.h"
|
||||
#endif
|
||||
|
||||
/* ########################## Mailbox Interface Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of Mailbox interface to be used in the OpenAMP MW
|
||||
* Please note that not all interfaces are supported by a STM32 device
|
||||
*/
|
||||
//#define MAILBOX_IPCC_IF_ENABLED
|
||||
#define MAILBOX_HSEM_IF_ENABLED
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include Mailbox interface header file
|
||||
*/
|
||||
|
||||
#ifdef MAILBOX_IPCC_IF_ENABLED
|
||||
#include "mbox_ipcc.h"
|
||||
#endif /* MAILBOX_IPCC_IF_ENABLED */
|
||||
|
||||
#ifdef MAILBOX_HSEM_IF_ENABLED
|
||||
#include "mbox_hsem.h"
|
||||
#endif /* MAILBOX_HSEM_IF_ENABLED */
|
||||
|
||||
/* ########################## Virtual Diver Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the OpenAMP Virtual driver module
|
||||
* Please note that virtual driver are not supported on all stm32 families
|
||||
*/
|
||||
//#define VIRTUAL_UART_MODULE_ENABLED
|
||||
//#define VIRTUAL_I2C_MODULE_ENABLED
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include Virtual Driver module's header file
|
||||
*/
|
||||
|
||||
#ifdef VIRTUAL_UART_MODULE_ENABLED
|
||||
#include "virt_uart.h"
|
||||
#endif /* VIRTUAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef VIRTUAL_I2C_MODULE_ENABLED
|
||||
#include "virt_i2c.h"
|
||||
#endif /* VIRTUAL_I2C_MODULE_ENABLED */
|
||||
|
||||
/* ########################## Linux Master Selection ############################## */
|
||||
/**
|
||||
* @brief Due to Linux compatibility, it's important to distinguish if the MASTER is Linux or not.
|
||||
* In that case, the LINUX_RPROC_MASTER define is required
|
||||
*/
|
||||
//#define LINUX_RPROC_MASTER
|
||||
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup OPENAMP_MW
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF OPENAMP_CONF
|
||||
* @brief Configuration file for Openamp mw
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Variables OPENAMP_CONF_Exported_Variables
|
||||
* @brief Public variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Defines OPENAMP_CONF_Exported_Defines
|
||||
* @brief Defines for configuration of the Openamp mw
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (__ICCARM__)
|
||||
/*
|
||||
* For IAR, the .icf file should contain the following lines:
|
||||
* define symbol __OPENAMP_region_start__ = BASE_ADDRESS; (0x38000400 for example)
|
||||
* define symbol __OPENAMP_region_size__ = MEM_SIZE; (0xB000 as example)
|
||||
*
|
||||
* export symbol __OPENAMP_region_start__;
|
||||
* export symbol __OPENAMP_region_size__;
|
||||
*/
|
||||
extern const uint32_t __OPENAMP_region_start__;
|
||||
extern const uint8_t __OPENAMP_region_size__;
|
||||
#define SHM_START_ADDRESS ((metal_phys_addr_t)&__OPENAMP_region_start__)
|
||||
#define SHM_SIZE ((size_t)&__OPENAMP_region_size__)
|
||||
|
||||
#elif defined(__CC_ARM) || defined (__clang__)
|
||||
/*
|
||||
* For MDK-ARM, the scatter file .sct should contain the following line:
|
||||
* LR_IROM1 .... {
|
||||
* ...
|
||||
* __OpenAMP_SHMEM__ 0x38000400 EMPTY 0x0000B000 {} ; Shared Memory area used by OpenAMP
|
||||
* }
|
||||
*
|
||||
*/
|
||||
extern unsigned int Image$$__OpenAMP_SHMEM__$$Base;
|
||||
extern unsigned int Image$$__OpenAMP_SHMEM__$$ZI$$Length;
|
||||
#define SHM_START_ADDRESS (unsigned int)&Image$$__OpenAMP_SHMEM__$$Base
|
||||
#define SHM_SIZE ((size_t)&Image$$__OpenAMP_SHMEM__$$ZI$$Length)
|
||||
|
||||
#else
|
||||
/*
|
||||
* for GCC add the following content to the .ld file:
|
||||
* MEMORY
|
||||
* {
|
||||
* ...
|
||||
* OPEN_AMP_SHMEM (xrw) : ORIGIN = 0x38000400, LENGTH = 63K
|
||||
* }
|
||||
* __OPENAMP_region_start__ = ORIGIN(OPEN_AMP_SHMEM);
|
||||
* __OPENAMP_region_end__ = ORIGIN(OPEN_AMP_SHMEM) + LENGTH(OPEN_AMP_SHMEM);
|
||||
*
|
||||
* using the LENGTH(OPEN_AMP_SHMEM) to set the SHM_SIZE lead to a crash thus we
|
||||
* use the start and end address.
|
||||
*/
|
||||
|
||||
extern int __OPENAMP_region_start__[]; /* defined by linker script */
|
||||
extern int __OPENAMP_region_end__[]; /* defined by linker script */
|
||||
|
||||
#define SHM_START_ADDRESS ((metal_phys_addr_t)__OPENAMP_region_start__)
|
||||
#define SHM_SIZE (size_t)((void *)__OPENAMP_region_end__ - (void *) __OPENAMP_region_start__)
|
||||
|
||||
#endif
|
||||
|
||||
#if defined LINUX_RPROC_MASTER
|
||||
#define VRING_RX_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_TX_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_BUFF_ADDRESS -1 /* allocated by Master processor: CA7 */
|
||||
#define VRING_ALIGNMENT 16 /* fixed to match with linux constraint */
|
||||
#define VRING_NUM_BUFFS 16 /* number of rpmsg buffer */
|
||||
#else
|
||||
#define VRING_RX_ADDRESS SHM_START_ADDRESS
|
||||
#define VRING_TX_ADDRESS (SHM_START_ADDRESS + 0x400)
|
||||
#define VRING_BUFF_ADDRESS (SHM_START_ADDRESS + 0x800)
|
||||
#define VRING_ALIGNMENT 4
|
||||
#define VRING_NUM_BUFFS 4 /* number of rpmsg buffers */
|
||||
#endif
|
||||
|
||||
/* Fixed parameter */
|
||||
|
||||
#define NUM_RESOURCE_ENTRIES 2
|
||||
|
||||
#define VRING_COUNT 2
|
||||
|
||||
#define VDEV_ID 0xFF
|
||||
|
||||
#define VRING0_ID 0 /* VRING0 ID (master to remote) fixed to 0 for linux compatibility*/
|
||||
|
||||
#define VRING1_ID 1 /* VRING1 ID (remote to master) fixed to 1 for linux compatibility */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Macros OPENAMP_CONF_Exported_Macros
|
||||
* @brief Aliases.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* DEBUG macros */
|
||||
|
||||
#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
|
||||
#define OPENAMP_log_dbg log_dbg
|
||||
#define OPENAMP_log_info log_info
|
||||
#define OPENAMP_log_warn log_warn
|
||||
#define OPENAMP_log_err log_err
|
||||
#else
|
||||
#define OPENAMP_log_dbg(...)
|
||||
#define OPENAMP_log_info(...)
|
||||
#define OPENAMP_log_warn(...)
|
||||
#define OPENAMP_log_err(...)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_Types OPENAMP_CONF_Exported_Types
|
||||
* @brief Types.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup OPENAMP_CONF_Exported_FunctionsPrototype OPENAMP_CONF_Exported_FunctionsPrototype
|
||||
* @brief Declaration of public functions for OpenAMP mw.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported functions -------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __OPENAMP_CONF__H__ */
|
||||
|
||||
@@ -0,0 +1,175 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file rsc_table.c
|
||||
* @author MCD Application Team
|
||||
* @brief Resource table
|
||||
*
|
||||
* This file provides a default resource table requested by remote proc to
|
||||
* load the elf file. It also allows to add debug trace using a shared buffer.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/** @addtogroup RSC_TABLE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(__ICCARM__) || defined (__CC_ARM)
|
||||
#include <stddef.h> /* needed for offsetof definition*/
|
||||
#endif
|
||||
#include "rsc_table.h"
|
||||
#include "openamp/open_amp.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup resource_table_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Place resource table in special ELF section */
|
||||
#if defined(__GNUC__)
|
||||
#define __section_t(S) __attribute__((__section__(#S)))
|
||||
#define __resource __section_t(.resource_table)
|
||||
#endif
|
||||
|
||||
#if defined (LINUX_RPROC_MASTER)
|
||||
#ifdef VIRTIO_MASTER_ONLY
|
||||
#define CONST
|
||||
#else
|
||||
#define CONST const
|
||||
#endif
|
||||
#else
|
||||
#define CONST
|
||||
#endif
|
||||
|
||||
#define RPMSG_IPU_C0_FEATURES 1
|
||||
#define VRING_COUNT 2
|
||||
|
||||
/* VirtIO rpmsg device id */
|
||||
#define VIRTIO_ID_RPMSG_ 7
|
||||
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
extern char system_log_buf[];
|
||||
#endif
|
||||
|
||||
#if defined(__GNUC__)
|
||||
#if !defined (__CC_ARM) && !defined (LINUX_RPROC_MASTER)
|
||||
|
||||
/* Since GCC is not initializing the resource_table at startup, it is declared as volatile to avoid compiler optimization
|
||||
* for the CM4 (see resource_table_init() below)
|
||||
*/
|
||||
volatile struct shared_resource_table __resource __attribute__((used)) resource_table;
|
||||
#else
|
||||
CONST struct shared_resource_table __resource __attribute__((used)) resource_table = {
|
||||
#endif
|
||||
#elif defined(__ICCARM__)
|
||||
__root CONST struct shared_resource_table resource_table @ ".resource_table" = {
|
||||
#endif
|
||||
|
||||
#if defined(__ICCARM__) || defined (__CC_ARM) || defined (LINUX_RPROC_MASTER)
|
||||
.version = 1,
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
.num = 2,
|
||||
#else
|
||||
.num = 1,
|
||||
#endif
|
||||
.reserved = {0, 0},
|
||||
.offset = {
|
||||
offsetof(struct shared_resource_table, vdev),
|
||||
offsetof(struct shared_resource_table, cm_trace),
|
||||
},
|
||||
|
||||
/* Virtio device entry */
|
||||
.vdev= {
|
||||
RSC_VDEV, VIRTIO_ID_RPMSG_, 0, RPMSG_IPU_C0_FEATURES, 0, 0, 0,
|
||||
VRING_COUNT, {0, 0},
|
||||
},
|
||||
|
||||
/* Vring rsc entry - part of vdev rsc entry */
|
||||
.vring0 = {VRING_TX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING0_ID, 0},
|
||||
.vring1 = {VRING_RX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING1_ID, 0},
|
||||
|
||||
#if defined (__LOG_TRACE_IO_)
|
||||
.cm_trace = {
|
||||
RSC_TRACE,
|
||||
(uint32_t)system_log_buf, SYSTEM_TRACE_BUF_SZ, 0, "cm4_log",
|
||||
},
|
||||
#endif
|
||||
} ;
|
||||
#endif
|
||||
|
||||
void resource_table_init(int RPMsgRole, void **table_ptr, int *length)
|
||||
{
|
||||
|
||||
#if !defined (LINUX_RPROC_MASTER)
|
||||
#if defined (__GNUC__) && ! defined (__CC_ARM)
|
||||
#ifdef VIRTIO_MASTER_ONLY
|
||||
|
||||
/*
|
||||
* Currently the GCC linker doesn't initialize the resource_table global variable at startup
|
||||
* it is done here by the master application.
|
||||
*/
|
||||
memset(&resource_table, '\0', sizeof(struct shared_resource_table));
|
||||
resource_table.num = 1;
|
||||
resource_table.version = 1;
|
||||
resource_table.offset[0] = offsetof(struct shared_resource_table, vdev);
|
||||
|
||||
resource_table.vring0.da = VRING_TX_ADDRESS;
|
||||
resource_table.vring0.align = VRING_ALIGNMENT;
|
||||
resource_table.vring0.num = VRING_NUM_BUFFS;
|
||||
resource_table.vring0.notifyid = VRING0_ID;
|
||||
|
||||
resource_table.vring1.da = VRING_RX_ADDRESS;
|
||||
resource_table.vring1.align = VRING_ALIGNMENT;
|
||||
resource_table.vring1.num = VRING_NUM_BUFFS;
|
||||
resource_table.vring1.notifyid = VRING1_ID;
|
||||
|
||||
resource_table.vdev.type = RSC_VDEV;
|
||||
resource_table.vdev.id = VIRTIO_ID_RPMSG_;
|
||||
resource_table.vdev.num_of_vrings=VRING_COUNT;
|
||||
resource_table.vdev.dfeatures = RPMSG_IPU_C0_FEATURES;
|
||||
#else
|
||||
|
||||
/* For the slave application let's wait until the resource_table is correctly initialized */
|
||||
while(resource_table.vring1.da != VRING_RX_ADDRESS)
|
||||
{
|
||||
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
(void)RPMsgRole;
|
||||
*length = sizeof(resource_table);
|
||||
*table_ptr = (void *)&resource_table;
|
||||
}
|
||||
@@ -0,0 +1,74 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* This file populates resource table for BM remote
|
||||
* for use by the Linux Master */
|
||||
/* USER CODE END Header */
|
||||
|
||||
#ifndef RSC_TABLE_H_
|
||||
#define RSC_TABLE_H_
|
||||
|
||||
#include "openamp/open_amp.h"
|
||||
#include "openamp_conf.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* Resource table for the given remote */
|
||||
struct shared_resource_table {
|
||||
unsigned int version;
|
||||
unsigned int num;
|
||||
unsigned int reserved[2];
|
||||
unsigned int offset[NUM_RESOURCE_ENTRIES];
|
||||
/* text carveout entry */
|
||||
|
||||
/* rpmsg vdev entry */
|
||||
struct fw_rsc_vdev vdev;
|
||||
struct fw_rsc_vdev_vring vring0;
|
||||
struct fw_rsc_vdev_vring vring1;
|
||||
struct fw_rsc_trace cm_trace;
|
||||
};
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
void resource_table_init(int RPMsgRole, void **table_ptr, int *length);
|
||||
|
||||
#endif /* RSC_TABLE_H_ */
|
||||
@@ -0,0 +1,200 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Author : STM32CubeIDE
|
||||
**
|
||||
** Abstract : Linker script for STM32H7 series
|
||||
** 1024Kbytes FLASH
|
||||
** 800Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2024 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM_D1) + LENGTH(RAM_D1); /* end of "RAM_D1" Ram type memory */
|
||||
|
||||
_Min_Heap_Size = 0x2000; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
||||
|
||||
/* Memories definition */
|
||||
MEMORY
|
||||
{
|
||||
RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K /* Memory is divided. Actual start is 0x08000000 and actual length is 2048K */
|
||||
DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
|
||||
OPEN_AMP_RSCT (xrw) : ORIGIN = 0x38000000, LENGTH = 1K
|
||||
OPEN_AMP_SHMEM (xrw) : ORIGIN = 0x38000400, LENGTH = 63K
|
||||
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
__OPENAMP_region_start__ = ORIGIN(OPEN_AMP_SHMEM);
|
||||
__OPENAMP_region_size__ = LENGTH(OPEN_AMP_SHMEM);
|
||||
__OPENAMP_region_end__ = ORIGIN(OPEN_AMP_SHMEM) + LENGTH(OPEN_AMP_SHMEM);
|
||||
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code into "FLASH" Rom type memory */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data into "FLASH" Rom type memory */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data into "FLASH" Rom type memory */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
.ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* Used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections into "RAM" Ram type memory */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM_D1 AT> FLASH
|
||||
|
||||
/* Uninitialized data section into "RAM" Ram type memory */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM_D1
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM_D1
|
||||
|
||||
.openamp_section (NOLOAD) :
|
||||
{
|
||||
. = ABSOLUTE(0x38000000);
|
||||
*(.resource_table)
|
||||
} > OPEN_AMP_RSCT AT >FLASH
|
||||
|
||||
/* Remove information from the compiler libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
@@ -0,0 +1,190 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld (debug in RAM dedicated)
|
||||
**
|
||||
** Author : STM32CubeIDE
|
||||
**
|
||||
** Abstract : Linker script for STM32H7 series
|
||||
** 1024Kbytes FLASH
|
||||
** 800Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2024 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM_D1) + LENGTH(RAM_D1); /* end of "RAM_D1" Ram type memory */
|
||||
|
||||
_Min_Heap_Size = 0x2000; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
||||
|
||||
/* Memories definition */
|
||||
MEMORY
|
||||
{
|
||||
RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K /* Memory is divided. Actual start is 0x8000000 and actual length is 2048K */
|
||||
DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
|
||||
RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K
|
||||
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code into "RAM" Ram type memory */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
/* The program code and other data into "RAM" Ram type memory */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >RAM_D1
|
||||
|
||||
/* Constant data into "RAM" Ram type memory */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
.ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
.ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
.preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
.init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
.fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >RAM_D1
|
||||
|
||||
/* Used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections into "RAM" Ram type memory */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
|
||||
} >RAM_D1
|
||||
|
||||
/* Uninitialized data section into "RAM" Ram type memory */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM_D1
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM_D1
|
||||
|
||||
/* Remove information from the compiler libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,420 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32h7xx_dualcore_boot_cm4_cm7.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
|
||||
* This provides system initialization template function is case of
|
||||
* an application using a dual core STM32H7 device where
|
||||
* Cortex-M7 and Cortex-M4 boot are enabled at the FLASH option bytes
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32h7xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock, it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32h7xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32h7xx.h"
|
||||
#include <math.h>
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (CSI_VALUE)
|
||||
#define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* CSI_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in FLASH BANK1 or AXI SRAM, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
#if defined(CORE_CM4)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in D2 AXI SRAM else user remap will be done in FLASH BANK2. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS D2_AXISRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BANK2_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#elif defined(CORE_CM7)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in D1 AXI SRAM else user remap will be done in FLASH BANK1. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS D1_AXISRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BANK1_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x400. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#else
|
||||
#error Please #define CORE_CM4 or CORE_CM7
|
||||
#endif /* CORE_CM4 */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 64000000;
|
||||
uint32_t SystemD2Clock = 64000000;
|
||||
const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the FPU setting and vector table location
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
/*SEVONPEND enabled so that an interrupt coming from the CPU(n) interrupt signal is
|
||||
detectable by the CPU after a WFI/WFE instruction.*/
|
||||
SCB->SCR |= SCB_SCR_SEVONPEND_Msk;
|
||||
|
||||
#if defined(CORE_CM7)
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Increasing the CPU frequency */
|
||||
if(FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
|
||||
{
|
||||
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
|
||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
|
||||
}
|
||||
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= RCC_CR_HSION;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */
|
||||
RCC->CR &= 0xEAF6ED7FU;
|
||||
|
||||
/* Decreasing the number of wait states because of lower CPU frequency */
|
||||
if(FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
|
||||
{
|
||||
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
|
||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
|
||||
}
|
||||
|
||||
/* Reset D1CFGR register */
|
||||
RCC->D1CFGR = 0x00000000;
|
||||
|
||||
/* Reset D2CFGR register */
|
||||
RCC->D2CFGR = 0x00000000;
|
||||
|
||||
/* Reset D3CFGR register */
|
||||
RCC->D3CFGR = 0x00000000;
|
||||
|
||||
/* Reset PLLCKSELR register */
|
||||
RCC->PLLCKSELR = 0x02020200;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x01FF0000;
|
||||
/* Reset PLL1DIVR register */
|
||||
RCC->PLL1DIVR = 0x01010280;
|
||||
/* Reset PLL1FRACR register */
|
||||
RCC->PLL1FRACR = 0x00000000;
|
||||
|
||||
/* Reset PLL2DIVR register */
|
||||
RCC->PLL2DIVR = 0x01010280;
|
||||
|
||||
/* Reset PLL2FRACR register */
|
||||
|
||||
RCC->PLL2FRACR = 0x00000000;
|
||||
/* Reset PLL3DIVR register */
|
||||
RCC->PLL3DIVR = 0x01010280;
|
||||
|
||||
/* Reset PLL3FRACR register */
|
||||
RCC->PLL3FRACR = 0x00000000;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= 0xFFFBFFFFU;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIER = 0x00000000;
|
||||
|
||||
/* Enable CortexM7 HSEM EXTI line (line 78)*/
|
||||
EXTI_D2->EMR3 |= 0x4000UL;
|
||||
|
||||
if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U)
|
||||
{
|
||||
/* if stm32h7 revY*/
|
||||
/* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
|
||||
*((__IO uint32_t*)0x51008108) = 0x000000001U;
|
||||
}
|
||||
|
||||
#endif /* CORE_CM7*/
|
||||
|
||||
#if defined(CORE_CM4)
|
||||
/* Configure the Vector Table location add offset address for cortex-M4 ------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D2 AXI-RAM or in Internal FLASH */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#elif defined(CORE_CM7)
|
||||
/*
|
||||
* Disable the FMC bank1 (enabled after reset).
|
||||
* This, prevents CPU speculation access on this bank which blocks the use of FMC during
|
||||
* 24us. During this time the others FMC master (such as LTDC) cannot use it!
|
||||
*/
|
||||
FMC_Bank1_R->BTCR[0] = 0x000030D2;
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM or in Internal FLASH */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#else
|
||||
#error Please #define CORE_CM4 or CORE_CM7
|
||||
#endif /* CORE_CM4 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock , it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
|
||||
* HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
||||
* 4 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
* (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
||||
* 64 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
||||
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp;
|
||||
uint32_t common_system_clock;
|
||||
float_t fracn1, pllvco;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
|
||||
switch (RCC->CFGR & RCC_CFGR_SWS)
|
||||
{
|
||||
case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
|
||||
common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
|
||||
break;
|
||||
|
||||
case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */
|
||||
common_system_clock = CSI_VALUE;
|
||||
break;
|
||||
|
||||
case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
|
||||
common_system_clock = HSE_VALUE;
|
||||
break;
|
||||
|
||||
case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
|
||||
SYSCLK = PLL_VCO / PLLR
|
||||
*/
|
||||
pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
|
||||
pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ;
|
||||
pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos);
|
||||
fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
|
||||
|
||||
if (pllm != 0U)
|
||||
{
|
||||
switch (pllsource)
|
||||
{
|
||||
case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */
|
||||
|
||||
hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
|
||||
pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
||||
|
||||
break;
|
||||
|
||||
case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */
|
||||
pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
||||
break;
|
||||
|
||||
case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */
|
||||
pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
||||
break;
|
||||
|
||||
default:
|
||||
hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
|
||||
pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
||||
break;
|
||||
}
|
||||
pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ;
|
||||
common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp);
|
||||
}
|
||||
else
|
||||
{
|
||||
common_system_clock = 0U;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
|
||||
break;
|
||||
}
|
||||
|
||||
/* Compute SystemClock frequency --------------------------------------------------*/
|
||||
tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos];
|
||||
|
||||
/* common_system_clock frequency : CM7 CPU frequency */
|
||||
common_system_clock >>= tmp;
|
||||
|
||||
/* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */
|
||||
SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU));
|
||||
|
||||
#if defined(CORE_CM4)
|
||||
SystemCoreClock = SystemD2Clock;
|
||||
#else
|
||||
SystemCoreClock = common_system_clock;
|
||||
#endif /* CORE_CM4 */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,302 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h7xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32H7xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32H7xx device used in the target application
|
||||
* - To use or not the peripheral's drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral's registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32h7xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef STM32H7xx_H
|
||||
#define STM32H7xx_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32H7)
|
||||
#define STM32H7
|
||||
#endif /* STM32H7 */
|
||||
|
||||
|
||||
/* Uncomment the line below according to the target STM32H7 device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32H743xx) && !defined (STM32H753xx) && !defined (STM32H750xx) && !defined (STM32H742xx) && \
|
||||
!defined (STM32H745xx) && !defined (STM32H745xG) && !defined (STM32H755xx) && !defined (STM32H747xx) && !defined (STM32H747xG)&& !defined (STM32H757xx) && \
|
||||
!defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx) && !defined (STM32H7B0xxQ) && \
|
||||
!defined (STM32H735xx) && !defined (STM32H733xx) && !defined (STM32H730xx) && !defined (STM32H730xxQ) && !defined (STM32H725xx) && !defined (STM32H723xx)
|
||||
/* #define STM32H742xx */ /*!< STM32H742VI, STM32H742ZI, STM32H742AI, STM32H742II, STM32H742BI, STM32H742XI Devices */
|
||||
/* #define STM32H743xx */ /*!< STM32H743VI, STM32H743ZI, STM32H743AI, STM32H743II, STM32H743BI, STM32H743XI Devices */
|
||||
/* #define STM32H753xx */ /*!< STM32H753VI, STM32H753ZI, STM32H753AI, STM32H753II, STM32H753BI, STM32H753XI Devices */
|
||||
/* #define STM32H750xx */ /*!< STM32H750V, STM32H750I, STM32H750X Devices */
|
||||
/* #define STM32H747xx */ /*!< STM32H747ZI, STM32H747AI, STM32H747II, STM32H747BI, STM32H747XI Devices */
|
||||
/* #define STM32H747xG */ /*!< STM32H747AG, STM32H747IG, STM32H747BG, STM32H747XG */
|
||||
/* #define STM32H757xx */ /*!< STM32H757ZI, STM32H757AI, STM32H757II, STM32H757BI, STM32H757XI Devices */
|
||||
/* #define STM32H745xx */ /*!< STM32H745ZI, STM32H745II, STM32H745BI, STM32H745XI Devices */
|
||||
/* #define STM32H745xG */ /*!< STM32H745ZG, STM32H745IG, STM32H745BG, STM32H745XG Devices */
|
||||
/* #define STM32H755xx */ /*!< STM32H755ZI, STM32H755II, STM32H755BI, STM32H755XI Devices */
|
||||
/* #define STM32H7B0xx */ /*!< STM32H7B0IBTx, STM32H7B0RBTx, STM32H7B0VBTx, STM32H7B0ZBTx Devices */
|
||||
/* #define STM32H7B0xxQ */ /*!< STM32H7B0ABIxQ, STM32H7B0IBKxQ Devices */
|
||||
/* #define STM32H7A3xx */ /*!< STM32H7A3IIK6, STM32H7A3IIT6, STM32H7A3NIH6, STM32H7A3RIT6, STM32H7A3VIH6, STM32H7A3VIT6, STM32H7A3ZIT6 */
|
||||
/* #define STM32H7A3xxQ */ /*!< STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q */
|
||||
/* #define STM32H7B3xx */ /*!< STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6 */
|
||||
/* #define STM32H7B3xxQ */ /*!< STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q */
|
||||
/* #define STM32H735xx */ /*!< STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices */
|
||||
/* #define STM32H733xx */ /*!< STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices */
|
||||
/* #define STM32H730xx */ /*!< STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices */
|
||||
/* #define STM32H730xxQ */ /*!< STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices */
|
||||
/* #define STM32H725xx */ /*!< STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6 Devices */
|
||||
/* #define STM32H723xx */ /*!< STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number V1.10.7
|
||||
*/
|
||||
#define __STM32H7xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
|
||||
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 (0x0A) /*!< [23:16] sub1 version */
|
||||
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB2 (0x07) /*!< [15:8] sub2 version */
|
||||
#define __STM32H7xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
||||
#define __STM32H7xx_CMSIS_DEVICE_VERSION ((__STM32H7xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
|
||||
|(__STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
|
||||
|(__STM32H7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
|
||||
|(__STM32H7xx_CMSIS_DEVICE_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32H743xx)
|
||||
#include "stm32h743xx.h"
|
||||
#elif defined(STM32H753xx)
|
||||
#include "stm32h753xx.h"
|
||||
#elif defined(STM32H750xx)
|
||||
#include "stm32h750xx.h"
|
||||
#elif defined(STM32H742xx)
|
||||
#include "stm32h742xx.h"
|
||||
#elif defined(STM32H745xx)
|
||||
#include "stm32h745xx.h"
|
||||
#elif defined(STM32H745xG)
|
||||
#include "stm32h745xg.h"
|
||||
#elif defined(STM32H755xx)
|
||||
#include "stm32h755xx.h"
|
||||
#elif defined(STM32H747xx)
|
||||
#include "stm32h747xx.h"
|
||||
#elif defined(STM32H747xG)
|
||||
#include "stm32h747xg.h"
|
||||
#elif defined(STM32H757xx)
|
||||
#include "stm32h757xx.h"
|
||||
#elif defined(STM32H7B0xx)
|
||||
#include "stm32h7b0xx.h"
|
||||
#elif defined(STM32H7B0xxQ)
|
||||
#include "stm32h7b0xxq.h"
|
||||
#elif defined(STM32H7A3xx)
|
||||
#include "stm32h7a3xx.h"
|
||||
#elif defined(STM32H7B3xx)
|
||||
#include "stm32h7b3xx.h"
|
||||
#elif defined(STM32H7A3xxQ)
|
||||
#include "stm32h7a3xxq.h"
|
||||
#elif defined(STM32H7B3xxQ)
|
||||
#include "stm32h7b3xxq.h"
|
||||
#elif defined(STM32H735xx)
|
||||
#include "stm32h735xx.h"
|
||||
#elif defined(STM32H733xx)
|
||||
#include "stm32h733xx.h"
|
||||
#elif defined(STM32H730xx)
|
||||
#include "stm32h730xx.h"
|
||||
#elif defined(STM32H730xxQ)
|
||||
#include "stm32h730xxq.h"
|
||||
#elif defined(STM32H725xx)
|
||||
#include "stm32h725xx.h"
|
||||
#elif defined(STM32H723xx)
|
||||
#include "stm32h723xx.h"
|
||||
#else
|
||||
#error "Please select first the target STM32H7xx device used in your application (in stm32h7xx.h file)"
|
||||
#endif
|
||||
|
||||
#if defined(DUAL_CORE) && !defined(CORE_CM4) && !defined(CORE_CM7)
|
||||
#error "Dual core device, please select CORE_CM4 or CORE_CM7"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SUCCESS = 0,
|
||||
ERROR = !SUCCESS
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
/* Use of CMSIS compiler intrinsics for register exclusive access */
|
||||
/* Atomic 32-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SET_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEAR_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SETH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEARH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32h7xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* STM32H7xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,108 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32h7xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-Mx Device System Source File for STM32H7xx devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32h7xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef SYSTEM_STM32H7XX_H
|
||||
#define SYSTEM_STM32H7XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Domain1 Clock Frequency */
|
||||
extern uint32_t SystemD2Clock; /*!< System Domain2 Clock Frequency */
|
||||
extern const uint8_t D1CorePrescTable[16] ; /*!< D1CorePrescTable prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H7xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
#if defined(__GNUC__) && !defined(__ARMCC_VERSION)
|
||||
extern void ExitRun0Mode(void) __attribute__((optimize("Os")));
|
||||
#else
|
||||
extern void ExitRun0Mode(void);
|
||||
#endif /* __GNUC__ */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* SYSTEM_STM32H7XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -0,0 +1,6 @@
|
||||
This software component is provided to you as part of a software package and
|
||||
applicable license terms are in the Package_license file. If you received this
|
||||
software component outside of a package or without applicable license terms,
|
||||
the terms of the Apache-2.0 license shall apply.
|
||||
You may obtain a copy of the Apache-2.0 at:
|
||||
https://opensource.org/licenses/Apache-2.0
|
||||
@@ -0,0 +1,441 @@
|
||||
/******************************************************************************
|
||||
* @file cachel1_armv7.h
|
||||
* @brief CMSIS Level 1 Cache API for Armv7-M and later
|
||||
* @version V1.0.3
|
||||
* @date 17. March 2023
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2020-2021 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef ARM_CACHEL1_ARMV7_H
|
||||
#define ARM_CACHEL1_ARMV7_H
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_CacheFunctions Cache Functions
|
||||
\brief Functions that configure Instruction and Data cache.
|
||||
@{
|
||||
*/
|
||||
|
||||
/* Cache Size ID Register Macros */
|
||||
#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
|
||||
#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
|
||||
|
||||
#ifndef __SCB_DCACHE_LINE_SIZE
|
||||
#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */
|
||||
#endif
|
||||
|
||||
#ifndef __SCB_ICACHE_LINE_SIZE
|
||||
#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */
|
||||
#endif
|
||||
|
||||
/**
|
||||
\brief Enable I-Cache
|
||||
\details Turns on I-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_EnableICache (void)
|
||||
{
|
||||
#if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
|
||||
if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
SCB->ICIALLU = 0UL; /* invalidate I-Cache */
|
||||
__DSB();
|
||||
__ISB();
|
||||
SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable I-Cache
|
||||
\details Turns off I-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_DisableICache (void)
|
||||
{
|
||||
#if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
|
||||
__DSB();
|
||||
__ISB();
|
||||
SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
|
||||
SCB->ICIALLU = 0UL; /* invalidate I-Cache */
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Invalidate I-Cache
|
||||
\details Invalidates I-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_InvalidateICache (void)
|
||||
{
|
||||
#if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
|
||||
__DSB();
|
||||
__ISB();
|
||||
SCB->ICIALLU = 0UL;
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief I-Cache Invalidate by address
|
||||
\details Invalidates I-Cache for the given address.
|
||||
I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity.
|
||||
I-Cache memory blocks which are part of given address + given size are invalidated.
|
||||
\param[in] addr address
|
||||
\param[in] isize size of memory block (in number of bytes)
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (volatile void *addr, int32_t isize)
|
||||
{
|
||||
#if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
|
||||
if ( isize > 0 ) {
|
||||
int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U));
|
||||
uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */;
|
||||
|
||||
__DSB();
|
||||
|
||||
do {
|
||||
SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */
|
||||
op_addr += __SCB_ICACHE_LINE_SIZE;
|
||||
op_size -= __SCB_ICACHE_LINE_SIZE;
|
||||
} while ( op_size > 0 );
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Enable D-Cache
|
||||
\details Turns on D-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_EnableDCache (void)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
uint32_t ccsidr;
|
||||
uint32_t sets;
|
||||
uint32_t ways;
|
||||
|
||||
if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */
|
||||
|
||||
SCB->CSSELR = 0U; /* select Level 1 data cache */
|
||||
__DSB();
|
||||
|
||||
ccsidr = SCB->CCSIDR;
|
||||
|
||||
/* invalidate D-Cache */
|
||||
sets = (uint32_t)(CCSIDR_SETS(ccsidr));
|
||||
do {
|
||||
ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
|
||||
do {
|
||||
SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
|
||||
((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
|
||||
#if defined ( __CC_ARM )
|
||||
__schedule_barrier();
|
||||
#endif
|
||||
} while (ways-- != 0U);
|
||||
} while(sets-- != 0U);
|
||||
__DSB();
|
||||
|
||||
SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable D-Cache
|
||||
\details Turns off D-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_DisableDCache (void)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
struct {
|
||||
uint32_t ccsidr;
|
||||
uint32_t sets;
|
||||
uint32_t ways;
|
||||
} locals
|
||||
#if ((defined(__GNUC__) || defined(__clang__)) && !defined(__OPTIMIZE__))
|
||||
__ALIGNED(__SCB_DCACHE_LINE_SIZE)
|
||||
#endif
|
||||
;
|
||||
|
||||
SCB->CSSELR = 0U; /* select Level 1 data cache */
|
||||
__DSB();
|
||||
|
||||
SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
|
||||
__DSB();
|
||||
|
||||
#if !defined(__OPTIMIZE__)
|
||||
/*
|
||||
* For the endless loop issue with no optimization builds.
|
||||
* More details, see https://github.com/ARM-software/CMSIS_5/issues/620
|
||||
*
|
||||
* The issue only happens when local variables are in stack. If
|
||||
* local variables are saved in general purpose register, then the function
|
||||
* is OK.
|
||||
*
|
||||
* When local variables are in stack, after disabling the cache, flush the
|
||||
* local variables cache line for data consistency.
|
||||
*/
|
||||
/* Clean and invalidate the local variable cache. */
|
||||
#if defined(__ICCARM__)
|
||||
/* As we can't align the stack to the cache line size, invalidate each of the variables */
|
||||
SCB->DCCIMVAC = (uint32_t)&locals.sets;
|
||||
SCB->DCCIMVAC = (uint32_t)&locals.ways;
|
||||
SCB->DCCIMVAC = (uint32_t)&locals.ccsidr;
|
||||
#else
|
||||
SCB->DCCIMVAC = (uint32_t)&locals;
|
||||
#endif
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
|
||||
locals.ccsidr = SCB->CCSIDR;
|
||||
/* clean & invalidate D-Cache */
|
||||
locals.sets = (uint32_t)(CCSIDR_SETS(locals.ccsidr));
|
||||
do {
|
||||
locals.ways = (uint32_t)(CCSIDR_WAYS(locals.ccsidr));
|
||||
do {
|
||||
SCB->DCCISW = (((locals.sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
|
||||
((locals.ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
|
||||
#if defined ( __CC_ARM )
|
||||
__schedule_barrier();
|
||||
#endif
|
||||
} while (locals.ways-- != 0U);
|
||||
} while(locals.sets-- != 0U);
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Invalidate D-Cache
|
||||
\details Invalidates D-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_InvalidateDCache (void)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
uint32_t ccsidr;
|
||||
uint32_t sets;
|
||||
uint32_t ways;
|
||||
|
||||
SCB->CSSELR = 0U; /* select Level 1 data cache */
|
||||
__DSB();
|
||||
|
||||
ccsidr = SCB->CCSIDR;
|
||||
|
||||
/* invalidate D-Cache */
|
||||
sets = (uint32_t)(CCSIDR_SETS(ccsidr));
|
||||
do {
|
||||
ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
|
||||
do {
|
||||
SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
|
||||
((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
|
||||
#if defined ( __CC_ARM )
|
||||
__schedule_barrier();
|
||||
#endif
|
||||
} while (ways-- != 0U);
|
||||
} while(sets-- != 0U);
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clean D-Cache
|
||||
\details Cleans D-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_CleanDCache (void)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
uint32_t ccsidr;
|
||||
uint32_t sets;
|
||||
uint32_t ways;
|
||||
|
||||
SCB->CSSELR = 0U; /* select Level 1 data cache */
|
||||
__DSB();
|
||||
|
||||
ccsidr = SCB->CCSIDR;
|
||||
|
||||
/* clean D-Cache */
|
||||
sets = (uint32_t)(CCSIDR_SETS(ccsidr));
|
||||
do {
|
||||
ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
|
||||
do {
|
||||
SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
|
||||
((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
|
||||
#if defined ( __CC_ARM )
|
||||
__schedule_barrier();
|
||||
#endif
|
||||
} while (ways-- != 0U);
|
||||
} while(sets-- != 0U);
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clean & Invalidate D-Cache
|
||||
\details Cleans and Invalidates D-Cache
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
uint32_t ccsidr;
|
||||
uint32_t sets;
|
||||
uint32_t ways;
|
||||
|
||||
SCB->CSSELR = 0U; /* select Level 1 data cache */
|
||||
__DSB();
|
||||
|
||||
ccsidr = SCB->CCSIDR;
|
||||
|
||||
/* clean & invalidate D-Cache */
|
||||
sets = (uint32_t)(CCSIDR_SETS(ccsidr));
|
||||
do {
|
||||
ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
|
||||
do {
|
||||
SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
|
||||
((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
|
||||
#if defined ( __CC_ARM )
|
||||
__schedule_barrier();
|
||||
#endif
|
||||
} while (ways-- != 0U);
|
||||
} while(sets-- != 0U);
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief D-Cache Invalidate by address
|
||||
\details Invalidates D-Cache for the given address.
|
||||
D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity.
|
||||
D-Cache memory blocks which are part of given address + given size are invalidated.
|
||||
\param[in] addr address
|
||||
\param[in] dsize size of memory block (in number of bytes)
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (volatile void *addr, int32_t dsize)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
if ( dsize > 0 ) {
|
||||
int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U));
|
||||
uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */;
|
||||
|
||||
__DSB();
|
||||
|
||||
do {
|
||||
SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */
|
||||
op_addr += __SCB_DCACHE_LINE_SIZE;
|
||||
op_size -= __SCB_DCACHE_LINE_SIZE;
|
||||
} while ( op_size > 0 );
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief D-Cache Clean by address
|
||||
\details Cleans D-Cache for the given address
|
||||
D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity.
|
||||
D-Cache memory blocks which are part of given address + given size are cleaned.
|
||||
\param[in] addr address
|
||||
\param[in] dsize size of memory block (in number of bytes)
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (volatile void *addr, int32_t dsize)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
if ( dsize > 0 ) {
|
||||
int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U));
|
||||
uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */;
|
||||
|
||||
__DSB();
|
||||
|
||||
do {
|
||||
SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */
|
||||
op_addr += __SCB_DCACHE_LINE_SIZE;
|
||||
op_size -= __SCB_DCACHE_LINE_SIZE;
|
||||
} while ( op_size > 0 );
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief D-Cache Clean and Invalidate by address
|
||||
\details Cleans and invalidates D_Cache for the given address
|
||||
D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity.
|
||||
D-Cache memory blocks which are part of given address + given size are cleaned and invalidated.
|
||||
\param[in] addr address (aligned to 32-byte boundary)
|
||||
\param[in] dsize size of memory block (in number of bytes)
|
||||
*/
|
||||
__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (volatile void *addr, int32_t dsize)
|
||||
{
|
||||
#if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
|
||||
if ( dsize > 0 ) {
|
||||
int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U));
|
||||
uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */;
|
||||
|
||||
__DSB();
|
||||
|
||||
do {
|
||||
SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */
|
||||
op_addr += __SCB_DCACHE_LINE_SIZE;
|
||||
op_size -= __SCB_DCACHE_LINE_SIZE;
|
||||
} while ( op_size > 0 );
|
||||
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*@} end of CMSIS_Core_CacheFunctions */
|
||||
|
||||
#endif /* ARM_CACHEL1_ARMV7_H */
|
||||
@@ -0,0 +1,888 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_armcc.h
|
||||
* @brief CMSIS compiler ARMCC (Arm Compiler 5) header file
|
||||
* @version V5.3.2
|
||||
* @date 27. May 2021
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2021 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef __CMSIS_ARMCC_H
|
||||
#define __CMSIS_ARMCC_H
|
||||
|
||||
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
|
||||
#error "Please use Arm Compiler Toolchain V4.0.677 or later!"
|
||||
#endif
|
||||
|
||||
/* CMSIS compiler control architecture macros */
|
||||
#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \
|
||||
(defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) )
|
||||
#define __ARM_ARCH_6M__ 1
|
||||
#endif
|
||||
|
||||
#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1))
|
||||
#define __ARM_ARCH_7M__ 1
|
||||
#endif
|
||||
|
||||
#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
|
||||
#define __ARM_ARCH_7EM__ 1
|
||||
#endif
|
||||
|
||||
/* __ARM_ARCH_8M_BASE__ not applicable */
|
||||
/* __ARM_ARCH_8M_MAIN__ not applicable */
|
||||
/* __ARM_ARCH_8_1M_MAIN__ not applicable */
|
||||
|
||||
/* CMSIS compiler control DSP macros */
|
||||
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
#define __ARM_FEATURE_DSP 1
|
||||
#endif
|
||||
|
||||
/* CMSIS compiler specific defines */
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE __inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static __inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE static __forceinline
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __declspec(noreturn)
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT __packed struct
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION __packed union
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
#define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x)))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
#define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr)))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
#define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr)))
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __attribute__((aligned(x)))
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#define __RESTRICT __restrict
|
||||
#endif
|
||||
#ifndef __COMPILER_BARRIER
|
||||
#define __COMPILER_BARRIER() __memory_changed()
|
||||
#endif
|
||||
|
||||
/* ######################### Startup and Lowlevel Init ######################## */
|
||||
|
||||
#ifndef __PROGRAM_START
|
||||
#define __PROGRAM_START __main
|
||||
#endif
|
||||
|
||||
#ifndef __INITIAL_SP
|
||||
#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit
|
||||
#endif
|
||||
|
||||
#ifndef __STACK_LIMIT
|
||||
#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base
|
||||
#endif
|
||||
|
||||
#ifndef __VECTOR_TABLE
|
||||
#define __VECTOR_TABLE __Vectors
|
||||
#endif
|
||||
|
||||
#ifndef __VECTOR_TABLE_ATTRIBUTE
|
||||
#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET")))
|
||||
#endif
|
||||
|
||||
/* ########################## Core Instruction Access ######################### */
|
||||
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
|
||||
Access to dedicated instructions
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief No Operation
|
||||
\details No Operation does nothing. This instruction can be used for code alignment purposes.
|
||||
*/
|
||||
#define __NOP __nop
|
||||
|
||||
|
||||
/**
|
||||
\brief Wait For Interrupt
|
||||
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
|
||||
*/
|
||||
#define __WFI __wfi
|
||||
|
||||
|
||||
/**
|
||||
\brief Wait For Event
|
||||
\details Wait For Event is a hint instruction that permits the processor to enter
|
||||
a low-power state until one of a number of events occurs.
|
||||
*/
|
||||
#define __WFE __wfe
|
||||
|
||||
|
||||
/**
|
||||
\brief Send Event
|
||||
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
|
||||
*/
|
||||
#define __SEV __sev
|
||||
|
||||
|
||||
/**
|
||||
\brief Instruction Synchronization Barrier
|
||||
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
|
||||
so that all instructions following the ISB are fetched from cache or memory,
|
||||
after the instruction has been completed.
|
||||
*/
|
||||
#define __ISB() __isb(0xF)
|
||||
|
||||
/**
|
||||
\brief Data Synchronization Barrier
|
||||
\details Acts as a special kind of Data Memory Barrier.
|
||||
It completes when all explicit memory accesses before this instruction complete.
|
||||
*/
|
||||
#define __DSB() __dsb(0xF)
|
||||
|
||||
/**
|
||||
\brief Data Memory Barrier
|
||||
\details Ensures the apparent order of the explicit memory operations before
|
||||
and after the instruction, without ensuring their completion.
|
||||
*/
|
||||
#define __DMB() __dmb(0xF)
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (32 bit)
|
||||
\details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#define __REV __rev
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (16 bit)
|
||||
\details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
|
||||
{
|
||||
rev16 r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (16 bit)
|
||||
\details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
|
||||
{
|
||||
revsh r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Rotate Right in unsigned value (32 bit)
|
||||
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
|
||||
\param [in] op1 Value to rotate
|
||||
\param [in] op2 Number of Bits to rotate
|
||||
\return Rotated value
|
||||
*/
|
||||
#define __ROR __ror
|
||||
|
||||
|
||||
/**
|
||||
\brief Breakpoint
|
||||
\details Causes the processor to enter Debug state.
|
||||
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
|
||||
\param [in] value is ignored by the processor.
|
||||
If required, a debugger can use it to store additional information about the breakpoint.
|
||||
*/
|
||||
#define __BKPT(value) __breakpoint(value)
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse bit order of value
|
||||
\details Reverses the bit order of the given value.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
#define __RBIT __rbit
|
||||
#else
|
||||
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
|
||||
{
|
||||
uint32_t result;
|
||||
uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
|
||||
|
||||
result = value; /* r will be reversed bits of v; first get LSB of v */
|
||||
for (value >>= 1U; value != 0U; value >>= 1U)
|
||||
{
|
||||
result <<= 1U;
|
||||
result |= value & 1U;
|
||||
s--;
|
||||
}
|
||||
result <<= s; /* shift when v's highest bits are zero */
|
||||
return result;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Count leading zeros
|
||||
\details Counts the number of leading zeros of a data value.
|
||||
\param [in] value Value to count the leading zeros
|
||||
\return number of leading zeros in value
|
||||
*/
|
||||
#define __CLZ __clz
|
||||
|
||||
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (8 bit)
|
||||
\details Executes a exclusive LDR instruction for 8 bit value.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint8_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (16 bit)
|
||||
\details Executes a exclusive LDR instruction for 16 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint16_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (32 bit)
|
||||
\details Executes a exclusive LDR instruction for 32 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint32_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (8 bit)
|
||||
\details Executes a exclusive STR instruction for 8 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXB(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (16 bit)
|
||||
\details Executes a exclusive STR instruction for 16 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXH(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (32 bit)
|
||||
\details Executes a exclusive STR instruction for 32 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXW(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Remove the exclusive lock
|
||||
\details Removes the exclusive lock which is created by LDREX.
|
||||
*/
|
||||
#define __CLREX __clrex
|
||||
|
||||
|
||||
/**
|
||||
\brief Signed Saturate
|
||||
\details Saturates a signed value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (1..32)
|
||||
\return Saturated value
|
||||
*/
|
||||
#define __SSAT __ssat
|
||||
|
||||
|
||||
/**
|
||||
\brief Unsigned Saturate
|
||||
\details Saturates an unsigned value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (0..31)
|
||||
\return Saturated value
|
||||
*/
|
||||
#define __USAT __usat
|
||||
|
||||
|
||||
/**
|
||||
\brief Rotate Right with Extend (32 bit)
|
||||
\details Moves each bit of a bitstring right by one bit.
|
||||
The carry input is shifted in at the left end of the bitstring.
|
||||
\param [in] value Value to rotate
|
||||
\return Rotated value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
|
||||
{
|
||||
rrx r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (8 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 8 bit value.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint8_t at (*ptr)
|
||||
*/
|
||||
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (16 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 16 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint16_t at (*ptr)
|
||||
*/
|
||||
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (32 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 32 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint32_t at (*ptr)
|
||||
*/
|
||||
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (8 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 8 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRBT(value, ptr) __strt(value, ptr)
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (16 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 16 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRHT(value, ptr) __strt(value, ptr)
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (32 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 32 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRT(value, ptr) __strt(value, ptr)
|
||||
|
||||
#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
/**
|
||||
\brief Signed Saturate
|
||||
\details Saturates a signed value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (1..32)
|
||||
\return Saturated value
|
||||
*/
|
||||
__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
|
||||
{
|
||||
if ((sat >= 1U) && (sat <= 32U))
|
||||
{
|
||||
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
|
||||
const int32_t min = -1 - max ;
|
||||
if (val > max)
|
||||
{
|
||||
return max;
|
||||
}
|
||||
else if (val < min)
|
||||
{
|
||||
return min;
|
||||
}
|
||||
}
|
||||
return val;
|
||||
}
|
||||
|
||||
/**
|
||||
\brief Unsigned Saturate
|
||||
\details Saturates an unsigned value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (0..31)
|
||||
\return Saturated value
|
||||
*/
|
||||
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
|
||||
{
|
||||
if (sat <= 31U)
|
||||
{
|
||||
const uint32_t max = ((1U << sat) - 1U);
|
||||
if (val > (int32_t)max)
|
||||
{
|
||||
return max;
|
||||
}
|
||||
else if (val < 0)
|
||||
{
|
||||
return 0U;
|
||||
}
|
||||
}
|
||||
return (uint32_t)val;
|
||||
}
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
|
||||
|
||||
|
||||
/* ########################### Core Function Access ########################### */
|
||||
/** \ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Enable IRQ Interrupts
|
||||
\details Enables IRQ interrupts by clearing special-purpose register PRIMASK.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
/* intrinsic void __enable_irq(); */
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable IRQ Interrupts
|
||||
\details Disables IRQ interrupts by setting special-purpose register PRIMASK.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
/* intrinsic void __disable_irq(); */
|
||||
|
||||
/**
|
||||
\brief Get Control Register
|
||||
\details Returns the content of the Control Register.
|
||||
\return Control Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_CONTROL(void)
|
||||
{
|
||||
register uint32_t __regControl __ASM("control");
|
||||
return(__regControl);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Control Register
|
||||
\details Writes the given value to the Control Register.
|
||||
\param [in] control Control Register value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_CONTROL(uint32_t control)
|
||||
{
|
||||
register uint32_t __regControl __ASM("control");
|
||||
__regControl = control;
|
||||
__ISB();
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get IPSR Register
|
||||
\details Returns the content of the IPSR Register.
|
||||
\return IPSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_IPSR(void)
|
||||
{
|
||||
register uint32_t __regIPSR __ASM("ipsr");
|
||||
return(__regIPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get APSR Register
|
||||
\details Returns the content of the APSR Register.
|
||||
\return APSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_APSR(void)
|
||||
{
|
||||
register uint32_t __regAPSR __ASM("apsr");
|
||||
return(__regAPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get xPSR Register
|
||||
\details Returns the content of the xPSR Register.
|
||||
\return xPSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_xPSR(void)
|
||||
{
|
||||
register uint32_t __regXPSR __ASM("xpsr");
|
||||
return(__regXPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Process Stack Pointer
|
||||
\details Returns the current value of the Process Stack Pointer (PSP).
|
||||
\return PSP Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_PSP(void)
|
||||
{
|
||||
register uint32_t __regProcessStackPointer __ASM("psp");
|
||||
return(__regProcessStackPointer);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Process Stack Pointer
|
||||
\details Assigns the given value to the Process Stack Pointer (PSP).
|
||||
\param [in] topOfProcStack Process Stack Pointer value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
|
||||
{
|
||||
register uint32_t __regProcessStackPointer __ASM("psp");
|
||||
__regProcessStackPointer = topOfProcStack;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Main Stack Pointer
|
||||
\details Returns the current value of the Main Stack Pointer (MSP).
|
||||
\return MSP Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_MSP(void)
|
||||
{
|
||||
register uint32_t __regMainStackPointer __ASM("msp");
|
||||
return(__regMainStackPointer);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Main Stack Pointer
|
||||
\details Assigns the given value to the Main Stack Pointer (MSP).
|
||||
\param [in] topOfMainStack Main Stack Pointer value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
|
||||
{
|
||||
register uint32_t __regMainStackPointer __ASM("msp");
|
||||
__regMainStackPointer = topOfMainStack;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Priority Mask
|
||||
\details Returns the current state of the priority mask bit from the Priority Mask Register.
|
||||
\return Priority Mask value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_PRIMASK(void)
|
||||
{
|
||||
register uint32_t __regPriMask __ASM("primask");
|
||||
return(__regPriMask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Priority Mask
|
||||
\details Assigns the given value to the Priority Mask Register.
|
||||
\param [in] priMask Priority Mask
|
||||
*/
|
||||
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
|
||||
{
|
||||
register uint32_t __regPriMask __ASM("primask");
|
||||
__regPriMask = (priMask);
|
||||
}
|
||||
|
||||
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
/**
|
||||
\brief Enable FIQ
|
||||
\details Enables FIQ interrupts by clearing special-purpose register FAULTMASK.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
#define __enable_fault_irq __enable_fiq
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable FIQ
|
||||
\details Disables FIQ interrupts by setting special-purpose register FAULTMASK.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
#define __disable_fault_irq __disable_fiq
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Base Priority
|
||||
\details Returns the current value of the Base Priority register.
|
||||
\return Base Priority register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_BASEPRI(void)
|
||||
{
|
||||
register uint32_t __regBasePri __ASM("basepri");
|
||||
return(__regBasePri);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Base Priority
|
||||
\details Assigns the given value to the Base Priority register.
|
||||
\param [in] basePri Base Priority value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
|
||||
{
|
||||
register uint32_t __regBasePri __ASM("basepri");
|
||||
__regBasePri = (basePri & 0xFFU);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Base Priority with condition
|
||||
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
|
||||
or the new value increases the BASEPRI priority level.
|
||||
\param [in] basePri Base Priority value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
|
||||
{
|
||||
register uint32_t __regBasePriMax __ASM("basepri_max");
|
||||
__regBasePriMax = (basePri & 0xFFU);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Fault Mask
|
||||
\details Returns the current value of the Fault Mask register.
|
||||
\return Fault Mask register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
|
||||
{
|
||||
register uint32_t __regFaultMask __ASM("faultmask");
|
||||
return(__regFaultMask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Fault Mask
|
||||
\details Assigns the given value to the Fault Mask register.
|
||||
\param [in] faultMask Fault Mask value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
|
||||
{
|
||||
register uint32_t __regFaultMask __ASM("faultmask");
|
||||
__regFaultMask = (faultMask & (uint32_t)1U);
|
||||
}
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
|
||||
/**
|
||||
\brief Get FPSCR
|
||||
\details Returns the current value of the Floating Point Status/Control register.
|
||||
\return Floating Point Status/Control register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_FPSCR(void)
|
||||
{
|
||||
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
|
||||
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
|
||||
register uint32_t __regfpscr __ASM("fpscr");
|
||||
return(__regfpscr);
|
||||
#else
|
||||
return(0U);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set FPSCR
|
||||
\details Assigns the given value to the Floating Point Status/Control register.
|
||||
\param [in] fpscr Floating Point Status/Control value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
|
||||
{
|
||||
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
|
||||
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
|
||||
register uint32_t __regfpscr __ASM("fpscr");
|
||||
__regfpscr = (fpscr);
|
||||
#else
|
||||
(void)fpscr;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_RegAccFunctions */
|
||||
|
||||
|
||||
/* ################### Compiler specific Intrinsics ########################### */
|
||||
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
|
||||
Access to dedicated SIMD instructions
|
||||
@{
|
||||
*/
|
||||
|
||||
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
#define __SADD8 __sadd8
|
||||
#define __QADD8 __qadd8
|
||||
#define __SHADD8 __shadd8
|
||||
#define __UADD8 __uadd8
|
||||
#define __UQADD8 __uqadd8
|
||||
#define __UHADD8 __uhadd8
|
||||
#define __SSUB8 __ssub8
|
||||
#define __QSUB8 __qsub8
|
||||
#define __SHSUB8 __shsub8
|
||||
#define __USUB8 __usub8
|
||||
#define __UQSUB8 __uqsub8
|
||||
#define __UHSUB8 __uhsub8
|
||||
#define __SADD16 __sadd16
|
||||
#define __QADD16 __qadd16
|
||||
#define __SHADD16 __shadd16
|
||||
#define __UADD16 __uadd16
|
||||
#define __UQADD16 __uqadd16
|
||||
#define __UHADD16 __uhadd16
|
||||
#define __SSUB16 __ssub16
|
||||
#define __QSUB16 __qsub16
|
||||
#define __SHSUB16 __shsub16
|
||||
#define __USUB16 __usub16
|
||||
#define __UQSUB16 __uqsub16
|
||||
#define __UHSUB16 __uhsub16
|
||||
#define __SASX __sasx
|
||||
#define __QASX __qasx
|
||||
#define __SHASX __shasx
|
||||
#define __UASX __uasx
|
||||
#define __UQASX __uqasx
|
||||
#define __UHASX __uhasx
|
||||
#define __SSAX __ssax
|
||||
#define __QSAX __qsax
|
||||
#define __SHSAX __shsax
|
||||
#define __USAX __usax
|
||||
#define __UQSAX __uqsax
|
||||
#define __UHSAX __uhsax
|
||||
#define __USAD8 __usad8
|
||||
#define __USADA8 __usada8
|
||||
#define __SSAT16 __ssat16
|
||||
#define __USAT16 __usat16
|
||||
#define __UXTB16 __uxtb16
|
||||
#define __UXTAB16 __uxtab16
|
||||
#define __SXTB16 __sxtb16
|
||||
#define __SXTAB16 __sxtab16
|
||||
#define __SMUAD __smuad
|
||||
#define __SMUADX __smuadx
|
||||
#define __SMLAD __smlad
|
||||
#define __SMLADX __smladx
|
||||
#define __SMLALD __smlald
|
||||
#define __SMLALDX __smlaldx
|
||||
#define __SMUSD __smusd
|
||||
#define __SMUSDX __smusdx
|
||||
#define __SMLSD __smlsd
|
||||
#define __SMLSDX __smlsdx
|
||||
#define __SMLSLD __smlsld
|
||||
#define __SMLSLDX __smlsldx
|
||||
#define __SEL __sel
|
||||
#define __QADD __qadd
|
||||
#define __QSUB __qsub
|
||||
|
||||
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
|
||||
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
|
||||
|
||||
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
|
||||
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
|
||||
|
||||
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
|
||||
((int64_t)(ARG3) << 32U) ) >> 32U))
|
||||
|
||||
#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2))
|
||||
|
||||
#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3))
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
/*@} end of group CMSIS_SIMD_intrinsics */
|
||||
|
||||
|
||||
#endif /* __CMSIS_ARMCC_H */
|
||||
File diff suppressed because it is too large.
Load diff
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,283 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_compiler.h
|
||||
* @brief CMSIS compiler generic header file
|
||||
* @version V5.1.0
|
||||
* @date 09. October 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef __CMSIS_COMPILER_H
|
||||
#define __CMSIS_COMPILER_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/*
|
||||
* Arm Compiler 4/5
|
||||
*/
|
||||
#if defined ( __CC_ARM )
|
||||
#include "cmsis_armcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* Arm Compiler 6.6 LTM (armclang)
|
||||
*/
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100)
|
||||
#include "cmsis_armclang_ltm.h"
|
||||
|
||||
/*
|
||||
* Arm Compiler above 6.10.1 (armclang)
|
||||
*/
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100)
|
||||
#include "cmsis_armclang.h"
|
||||
|
||||
|
||||
/*
|
||||
* GNU Compiler
|
||||
*/
|
||||
#elif defined ( __GNUC__ )
|
||||
#include "cmsis_gcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* IAR Compiler
|
||||
*/
|
||||
#elif defined ( __ICCARM__ )
|
||||
#include <cmsis_iccarm.h>
|
||||
|
||||
|
||||
/*
|
||||
* TI Arm Compiler
|
||||
*/
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#include <cmsis_ccs.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __attribute__((aligned(x)))
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#define __RESTRICT __restrict
|
||||
#endif
|
||||
#ifndef __COMPILER_BARRIER
|
||||
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
|
||||
#define __COMPILER_BARRIER() (void)0
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* TASKING Compiler
|
||||
*/
|
||||
#elif defined ( __TASKING__ )
|
||||
/*
|
||||
* The CMSIS functions have been implemented as intrinsics in the compiler.
|
||||
* Please use "carm -?i" to get an up to date list of all intrinsics,
|
||||
* Including the CMSIS ones.
|
||||
*/
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __packed__
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __packed__ T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __align(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
#ifndef __COMPILER_BARRIER
|
||||
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
|
||||
#define __COMPILER_BARRIER() (void)0
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* COSMIC Compiler
|
||||
*/
|
||||
#elif defined ( __CSMC__ )
|
||||
#include <cmsis_csm.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM _asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
// NO RETURN is automatically detected hence no warning here
|
||||
#define __NO_RETURN
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#warning No compiler specific solution for __USED. __USED is ignored.
|
||||
#define __USED
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __weak
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED @packed
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT @packed struct
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION @packed union
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
@packed struct T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
|
||||
#define __ALIGNED(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
#ifndef __COMPILER_BARRIER
|
||||
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
|
||||
#define __COMPILER_BARRIER() (void)0
|
||||
#endif
|
||||
|
||||
|
||||
#else
|
||||
#error Unknown compiler.
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __CMSIS_COMPILER_H */
|
||||
|
||||
File diff suppressed because it is too large.
Load diff
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,39 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_version.h
|
||||
* @brief CMSIS Core(M) Version definitions
|
||||
* @version V5.0.5
|
||||
* @date 02. February 2022
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2022 ARM Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CMSIS_VERSION_H
|
||||
#define __CMSIS_VERSION_H
|
||||
|
||||
/* CMSIS Version definitions */
|
||||
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
|
||||
#define __CM_CMSIS_VERSION_SUB ( 6U) /*!< [15:0] CMSIS Core(M) sub version */
|
||||
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
|
||||
#endif
|
||||
File diff suppressed because it is too large.
Load diff
File diff suppressed because it is too large.
Load diff
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,952 @@
|
||||
/**************************************************************************//**
|
||||
* @file core_cm0.h
|
||||
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
|
||||
* @version V5.0.8
|
||||
* @date 21. August 2019
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2019 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CORE_CM0_H_GENERIC
|
||||
#define __CORE_CM0_H_GENERIC
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
|
||||
CMSIS violates the following MISRA-C:2004 rules:
|
||||
|
||||
\li Required Rule 8.5, object/function definition in header file.<br>
|
||||
Function definitions in header files are used to allow 'inlining'.
|
||||
|
||||
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
|
||||
Unions are used for effective representation of core registers.
|
||||
|
||||
\li Advisory Rule 19.7, Function-like macro defined.<br>
|
||||
Function-like macros are used to allow more efficient code.
|
||||
*/
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* CMSIS definitions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\ingroup Cortex_M0
|
||||
@{
|
||||
*/
|
||||
|
||||
#include "cmsis_version.h"
|
||||
|
||||
/* CMSIS CM0 definitions */
|
||||
#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
|
||||
#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
|
||||
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
|
||||
|
||||
#define __CORTEX_M (0U) /*!< Cortex-M Core */
|
||||
|
||||
/** __FPU_USED indicates whether an FPU is used or not.
|
||||
This core does not support an FPU at all
|
||||
*/
|
||||
#define __FPU_USED 0U
|
||||
|
||||
#if defined ( __CC_ARM )
|
||||
#if defined __TARGET_FPU_VFP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#if defined __ARM_FP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
#if defined __ARMVFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#if defined __TI_VFP_SUPPORT__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TASKING__ )
|
||||
#if defined __FPU_VFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __CSMC__ )
|
||||
#if ( __CSMC__ & 0x400U)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM0_H_GENERIC */
|
||||
|
||||
#ifndef __CMSIS_GENERIC
|
||||
|
||||
#ifndef __CORE_CM0_H_DEPENDANT
|
||||
#define __CORE_CM0_H_DEPENDANT
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* check device defines and use defaults */
|
||||
#if defined __CHECK_DEVICE_DEFINES
|
||||
#ifndef __CM0_REV
|
||||
#define __CM0_REV 0x0000U
|
||||
#warning "__CM0_REV not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __NVIC_PRIO_BITS
|
||||
#define __NVIC_PRIO_BITS 2U
|
||||
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __Vendor_SysTickConfig
|
||||
#define __Vendor_SysTickConfig 0U
|
||||
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* IO definitions (access restrictions to peripheral registers) */
|
||||
/**
|
||||
\defgroup CMSIS_glob_defs CMSIS Global Defines
|
||||
|
||||
<strong>IO Type Qualifiers</strong> are used
|
||||
\li to specify the access to peripheral variables.
|
||||
\li for automatic generation of peripheral register debug information.
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
#define __I volatile /*!< Defines 'read only' permissions */
|
||||
#else
|
||||
#define __I volatile const /*!< Defines 'read only' permissions */
|
||||
#endif
|
||||
#define __O volatile /*!< Defines 'write only' permissions */
|
||||
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||||
|
||||
/* following defines should be used for structure members */
|
||||
#define __IM volatile const /*! Defines 'read only' structure member permissions */
|
||||
#define __OM volatile /*! Defines 'write only' structure member permissions */
|
||||
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
|
||||
|
||||
/*@} end of group Cortex_M0 */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Register Abstraction
|
||||
Core Register contain:
|
||||
- Core Register
|
||||
- Core NVIC Register
|
||||
- Core SCB Register
|
||||
- Core SysTick Register
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_core_register Defines and Type Definitions
|
||||
\brief Type definitions and defines for Cortex-M processor based devices.
|
||||
*/
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CORE Status and Control Registers
|
||||
\brief Core Register type definitions.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Union type to access the Application Program Status Register (APSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} APSR_Type;
|
||||
|
||||
/* APSR Register Definitions */
|
||||
#define APSR_N_Pos 31U /*!< APSR: N Position */
|
||||
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
|
||||
|
||||
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
|
||||
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
|
||||
|
||||
#define APSR_C_Pos 29U /*!< APSR: C Position */
|
||||
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
|
||||
|
||||
#define APSR_V_Pos 28U /*!< APSR: V Position */
|
||||
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Interrupt Program Status Register (IPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} IPSR_Type;
|
||||
|
||||
/* IPSR Register Definitions */
|
||||
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
|
||||
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
|
||||
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
|
||||
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} xPSR_Type;
|
||||
|
||||
/* xPSR Register Definitions */
|
||||
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
|
||||
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
|
||||
|
||||
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
|
||||
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
|
||||
|
||||
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
|
||||
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
|
||||
|
||||
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
|
||||
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
|
||||
|
||||
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
|
||||
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
|
||||
|
||||
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
|
||||
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Control Registers (CONTROL).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
|
||||
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
|
||||
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} CONTROL_Type;
|
||||
|
||||
/* CONTROL Register Definitions */
|
||||
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
|
||||
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
|
||||
|
||||
/*@} end of group CMSIS_CORE */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
|
||||
\brief Type definitions for the NVIC Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
|
||||
uint32_t RESERVED0[31U];
|
||||
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
|
||||
uint32_t RESERVED1[31U];
|
||||
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
|
||||
uint32_t RESERVED2[31U];
|
||||
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
|
||||
uint32_t RESERVED3[31U];
|
||||
uint32_t RESERVED4[64U];
|
||||
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
|
||||
} NVIC_Type;
|
||||
|
||||
/*@} end of group CMSIS_NVIC */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCB System Control Block (SCB)
|
||||
\brief Type definitions for the System Control Block Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control Block (SCB).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
|
||||
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
|
||||
uint32_t RESERVED0;
|
||||
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
|
||||
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
|
||||
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
|
||||
uint32_t RESERVED1;
|
||||
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
|
||||
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
|
||||
} SCB_Type;
|
||||
|
||||
/* SCB CPUID Register Definitions */
|
||||
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
|
||||
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
|
||||
|
||||
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
|
||||
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
|
||||
|
||||
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
|
||||
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
|
||||
|
||||
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
|
||||
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
|
||||
|
||||
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
|
||||
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
|
||||
|
||||
/* SCB Interrupt Control State Register Definitions */
|
||||
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
|
||||
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
|
||||
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
|
||||
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
|
||||
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
|
||||
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
|
||||
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
|
||||
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
|
||||
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
|
||||
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
|
||||
|
||||
/* SCB Application Interrupt and Reset Control Register Definitions */
|
||||
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
|
||||
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
|
||||
|
||||
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
|
||||
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
|
||||
|
||||
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
|
||||
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
|
||||
|
||||
/* SCB System Control Register Definitions */
|
||||
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
|
||||
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
|
||||
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
|
||||
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
|
||||
|
||||
/* SCB Configuration Control Register Definitions */
|
||||
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
|
||||
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
|
||||
|
||||
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
|
||||
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
|
||||
|
||||
/* SCB System Handler Control and State Register Definitions */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
|
||||
\brief Type definitions for the System Timer Registers.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Timer (SysTick).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
|
||||
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
|
||||
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
|
||||
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
|
||||
} SysTick_Type;
|
||||
|
||||
/* SysTick Control / Status Register Definitions */
|
||||
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
|
||||
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||||
|
||||
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
|
||||
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||||
|
||||
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
|
||||
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||||
|
||||
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
|
||||
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
|
||||
|
||||
/* SysTick Reload Register Definitions */
|
||||
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
|
||||
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
|
||||
|
||||
/* SysTick Current Register Definitions */
|
||||
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
|
||||
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
|
||||
|
||||
/* SysTick Calibration Register Definitions */
|
||||
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
|
||||
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||||
|
||||
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
|
||||
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||||
|
||||
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
|
||||
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
|
||||
|
||||
/*@} end of group CMSIS_SysTick */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
|
||||
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
|
||||
Therefore they are not covered by the Cortex-M0 header file.
|
||||
@{
|
||||
*/
|
||||
/*@} end of group CMSIS_CoreDebug */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_bitfield Core register bit field macros
|
||||
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Mask and shift a bit field value for use in a register bit range.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted value.
|
||||
*/
|
||||
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
|
||||
|
||||
/**
|
||||
\brief Mask and shift a register value to extract a bit filed value.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted bit field value.
|
||||
*/
|
||||
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
|
||||
|
||||
/*@} end of group CMSIS_core_bitfield */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_base Core Definitions
|
||||
\brief Definitions for base addresses, unions, and structures.
|
||||
@{
|
||||
*/
|
||||
|
||||
/* Memory mapping of Core Hardware */
|
||||
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
|
||||
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
|
||||
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
|
||||
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
|
||||
|
||||
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
|
||||
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
|
||||
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
|
||||
|
||||
|
||||
/*@} */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Hardware Abstraction Layer
|
||||
Core Function Interface contains:
|
||||
- Core NVIC Functions
|
||||
- Core SysTick Functions
|
||||
- Core Register Access Functions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ########################## NVIC functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
|
||||
\brief Functions that manage interrupts and exceptions via the NVIC.
|
||||
@{
|
||||
*/
|
||||
|
||||
#ifdef CMSIS_NVIC_VIRTUAL
|
||||
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
|
||||
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
|
||||
#define NVIC_EnableIRQ __NVIC_EnableIRQ
|
||||
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
|
||||
#define NVIC_DisableIRQ __NVIC_DisableIRQ
|
||||
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
|
||||
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
|
||||
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
|
||||
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */
|
||||
#define NVIC_SetPriority __NVIC_SetPriority
|
||||
#define NVIC_GetPriority __NVIC_GetPriority
|
||||
#define NVIC_SystemReset __NVIC_SystemReset
|
||||
#endif /* CMSIS_NVIC_VIRTUAL */
|
||||
|
||||
#ifdef CMSIS_VECTAB_VIRTUAL
|
||||
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetVector __NVIC_SetVector
|
||||
#define NVIC_GetVector __NVIC_GetVector
|
||||
#endif /* (CMSIS_VECTAB_VIRTUAL) */
|
||||
|
||||
#define NVIC_USER_IRQ_OFFSET 16
|
||||
|
||||
|
||||
/* The following EXC_RETURN values are saved the LR on exception entry */
|
||||
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
|
||||
|
||||
|
||||
/* Interrupt Priorities are WORD accessible only under Armv6-M */
|
||||
/* The following MACROS handle generation of the register offset and byte masks */
|
||||
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
||||
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
|
||||
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
||||
|
||||
#define __NVIC_SetPriorityGrouping(X) (void)(X)
|
||||
#define __NVIC_GetPriorityGrouping() (0U)
|
||||
|
||||
/**
|
||||
\brief Enable Interrupt
|
||||
\details Enables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
__COMPILER_BARRIER();
|
||||
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__COMPILER_BARRIER();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Enable status
|
||||
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt is not enabled.
|
||||
\return 1 Interrupt is enabled.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable Interrupt
|
||||
\details Disables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Pending Interrupt
|
||||
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt status is not pending.
|
||||
\return 1 Interrupt status is pending.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Pending Interrupt
|
||||
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clear Pending Interrupt
|
||||
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Priority
|
||||
\details Sets the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\param [in] priority Priority to set.
|
||||
\note The priority cannot be set for every processor exception.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
else
|
||||
{
|
||||
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Priority
|
||||
\details Reads the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Interrupt Priority.
|
||||
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
|
||||
{
|
||||
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
else
|
||||
{
|
||||
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Encode Priority
|
||||
\details Encodes the priority for an interrupt with the given priority group,
|
||||
preemptive priority value, and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [in] PreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [in] SubPriority Subpriority value (starting from 0).
|
||||
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
|
||||
*/
|
||||
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
return (
|
||||
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
|
||||
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Decode Priority
|
||||
\details Decodes an interrupt priority value with a given priority group to
|
||||
preemptive priority value and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
|
||||
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [out] pSubPriority Subpriority value (starting from 0).
|
||||
*/
|
||||
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
|
||||
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Vector
|
||||
\details Sets an interrupt vector in SRAM based interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
Address 0 must be mapped to SRAM.
|
||||
\param [in] IRQn Interrupt number
|
||||
\param [in] vector Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */
|
||||
*(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */
|
||||
/* ARM Application Note 321 states that the M0 does not require the architectural barrier */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Vector
|
||||
\details Reads an interrupt vector from interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */
|
||||
return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief System Reset
|
||||
\details Initiates a system reset request to reset the MCU.
|
||||
*/
|
||||
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
|
||||
{
|
||||
__DSB(); /* Ensure all outstanding memory accesses included
|
||||
buffered write are completed before reset */
|
||||
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
|
||||
SCB_AIRCR_SYSRESETREQ_Msk);
|
||||
__DSB(); /* Ensure completion of memory access */
|
||||
|
||||
for(;;) /* wait until reset */
|
||||
{
|
||||
__NOP();
|
||||
}
|
||||
}
|
||||
|
||||
/*@} end of CMSIS_Core_NVICFunctions */
|
||||
|
||||
|
||||
/* ########################## FPU functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_FpuFunctions FPU Functions
|
||||
\brief Function that provides FPU type.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief get FPU type
|
||||
\details returns the FPU type
|
||||
\returns
|
||||
- \b 0: No FPU
|
||||
- \b 1: Single precision FPU
|
||||
- \b 2: Double + Single precision FPU
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
|
||||
{
|
||||
return 0U; /* No FPU */
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_FpuFunctions */
|
||||
|
||||
|
||||
|
||||
/* ################################## SysTick function ############################################ */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
|
||||
\brief Functions that configure the System.
|
||||
@{
|
||||
*/
|
||||
|
||||
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
|
||||
|
||||
/**
|
||||
\brief System Tick Configuration
|
||||
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||||
Counter is in free running mode to generate periodic interrupts.
|
||||
\param [in] ticks Number of ticks between two interrupts.
|
||||
\return 0 Function succeeded.
|
||||
\return 1 Function failed.
|
||||
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
||||
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
||||
must contain a vendor-specific implementation of this function.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
|
||||
{
|
||||
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
|
||||
{
|
||||
return (1UL); /* Reload value impossible */
|
||||
}
|
||||
|
||||
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
||||
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_TICKINT_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
|
||||
return (0UL); /* Function successful */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*@} end of CMSIS_Core_SysTickFunctions */
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM0_H_DEPENDANT */
|
||||
|
||||
#endif /* __CMSIS_GENERIC */
|
||||
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,979 @@
|
||||
/**************************************************************************//**
|
||||
* @file core_cm1.h
|
||||
* @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File
|
||||
* @version V1.0.1
|
||||
* @date 12. November 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CORE_CM1_H_GENERIC
|
||||
#define __CORE_CM1_H_GENERIC
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
|
||||
CMSIS violates the following MISRA-C:2004 rules:
|
||||
|
||||
\li Required Rule 8.5, object/function definition in header file.<br>
|
||||
Function definitions in header files are used to allow 'inlining'.
|
||||
|
||||
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
|
||||
Unions are used for effective representation of core registers.
|
||||
|
||||
\li Advisory Rule 19.7, Function-like macro defined.<br>
|
||||
Function-like macros are used to allow more efficient code.
|
||||
*/
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* CMSIS definitions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\ingroup Cortex_M1
|
||||
@{
|
||||
*/
|
||||
|
||||
#include "cmsis_version.h"
|
||||
|
||||
/* CMSIS CM1 definitions */
|
||||
#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
|
||||
#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
|
||||
#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
|
||||
|
||||
#define __CORTEX_M (1U) /*!< Cortex-M Core */
|
||||
|
||||
/** __FPU_USED indicates whether an FPU is used or not.
|
||||
This core does not support an FPU at all
|
||||
*/
|
||||
#define __FPU_USED 0U
|
||||
|
||||
#if defined ( __CC_ARM )
|
||||
#if defined __TARGET_FPU_VFP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#if defined __ARM_FP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
#if defined __ARMVFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#if defined __TI_VFP_SUPPORT__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TASKING__ )
|
||||
#if defined __FPU_VFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __CSMC__ )
|
||||
#if ( __CSMC__ & 0x400U)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM1_H_GENERIC */
|
||||
|
||||
#ifndef __CMSIS_GENERIC
|
||||
|
||||
#ifndef __CORE_CM1_H_DEPENDANT
|
||||
#define __CORE_CM1_H_DEPENDANT
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* check device defines and use defaults */
|
||||
#if defined __CHECK_DEVICE_DEFINES
|
||||
#ifndef __CM1_REV
|
||||
#define __CM1_REV 0x0100U
|
||||
#warning "__CM1_REV not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __NVIC_PRIO_BITS
|
||||
#define __NVIC_PRIO_BITS 2U
|
||||
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __Vendor_SysTickConfig
|
||||
#define __Vendor_SysTickConfig 0U
|
||||
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* IO definitions (access restrictions to peripheral registers) */
|
||||
/**
|
||||
\defgroup CMSIS_glob_defs CMSIS Global Defines
|
||||
|
||||
<strong>IO Type Qualifiers</strong> are used
|
||||
\li to specify the access to peripheral variables.
|
||||
\li for automatic generation of peripheral register debug information.
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
#define __I volatile /*!< Defines 'read only' permissions */
|
||||
#else
|
||||
#define __I volatile const /*!< Defines 'read only' permissions */
|
||||
#endif
|
||||
#define __O volatile /*!< Defines 'write only' permissions */
|
||||
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||||
|
||||
/* following defines should be used for structure members */
|
||||
#define __IM volatile const /*! Defines 'read only' structure member permissions */
|
||||
#define __OM volatile /*! Defines 'write only' structure member permissions */
|
||||
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
|
||||
|
||||
/*@} end of group Cortex_M1 */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Register Abstraction
|
||||
Core Register contain:
|
||||
- Core Register
|
||||
- Core NVIC Register
|
||||
- Core SCB Register
|
||||
- Core SysTick Register
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_core_register Defines and Type Definitions
|
||||
\brief Type definitions and defines for Cortex-M processor based devices.
|
||||
*/
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CORE Status and Control Registers
|
||||
\brief Core Register type definitions.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Union type to access the Application Program Status Register (APSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} APSR_Type;
|
||||
|
||||
/* APSR Register Definitions */
|
||||
#define APSR_N_Pos 31U /*!< APSR: N Position */
|
||||
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
|
||||
|
||||
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
|
||||
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
|
||||
|
||||
#define APSR_C_Pos 29U /*!< APSR: C Position */
|
||||
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
|
||||
|
||||
#define APSR_V_Pos 28U /*!< APSR: V Position */
|
||||
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Interrupt Program Status Register (IPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} IPSR_Type;
|
||||
|
||||
/* IPSR Register Definitions */
|
||||
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
|
||||
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
|
||||
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
|
||||
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} xPSR_Type;
|
||||
|
||||
/* xPSR Register Definitions */
|
||||
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
|
||||
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
|
||||
|
||||
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
|
||||
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
|
||||
|
||||
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
|
||||
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
|
||||
|
||||
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
|
||||
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
|
||||
|
||||
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
|
||||
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
|
||||
|
||||
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
|
||||
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Control Registers (CONTROL).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
|
||||
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
|
||||
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} CONTROL_Type;
|
||||
|
||||
/* CONTROL Register Definitions */
|
||||
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
|
||||
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
|
||||
|
||||
/*@} end of group CMSIS_CORE */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
|
||||
\brief Type definitions for the NVIC Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
|
||||
uint32_t RESERVED0[31U];
|
||||
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
|
||||
uint32_t RSERVED1[31U];
|
||||
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
|
||||
uint32_t RESERVED2[31U];
|
||||
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
|
||||
uint32_t RESERVED3[31U];
|
||||
uint32_t RESERVED4[64U];
|
||||
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
|
||||
} NVIC_Type;
|
||||
|
||||
/*@} end of group CMSIS_NVIC */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCB System Control Block (SCB)
|
||||
\brief Type definitions for the System Control Block Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control Block (SCB).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
|
||||
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
|
||||
uint32_t RESERVED0;
|
||||
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
|
||||
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
|
||||
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
|
||||
uint32_t RESERVED1;
|
||||
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
|
||||
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
|
||||
} SCB_Type;
|
||||
|
||||
/* SCB CPUID Register Definitions */
|
||||
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
|
||||
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
|
||||
|
||||
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
|
||||
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
|
||||
|
||||
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
|
||||
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
|
||||
|
||||
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
|
||||
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
|
||||
|
||||
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
|
||||
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
|
||||
|
||||
/* SCB Interrupt Control State Register Definitions */
|
||||
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
|
||||
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
|
||||
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
|
||||
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
|
||||
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
|
||||
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
|
||||
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
|
||||
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
|
||||
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
|
||||
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
|
||||
|
||||
/* SCB Application Interrupt and Reset Control Register Definitions */
|
||||
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
|
||||
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
|
||||
|
||||
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
|
||||
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
|
||||
|
||||
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
|
||||
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
|
||||
|
||||
/* SCB System Control Register Definitions */
|
||||
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
|
||||
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
|
||||
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
|
||||
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
|
||||
|
||||
/* SCB Configuration Control Register Definitions */
|
||||
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
|
||||
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
|
||||
|
||||
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
|
||||
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
|
||||
|
||||
/* SCB System Handler Control and State Register Definitions */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
|
||||
\brief Type definitions for the System Control and ID Register not in the SCB
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control and ID Register not in the SCB.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t RESERVED0[2U];
|
||||
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
|
||||
} SCnSCB_Type;
|
||||
|
||||
/* Auxiliary Control Register Definitions */
|
||||
#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
|
||||
#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
|
||||
|
||||
#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
|
||||
#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCnotSCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
|
||||
\brief Type definitions for the System Timer Registers.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Timer (SysTick).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
|
||||
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
|
||||
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
|
||||
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
|
||||
} SysTick_Type;
|
||||
|
||||
/* SysTick Control / Status Register Definitions */
|
||||
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
|
||||
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||||
|
||||
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
|
||||
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||||
|
||||
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
|
||||
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||||
|
||||
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
|
||||
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
|
||||
|
||||
/* SysTick Reload Register Definitions */
|
||||
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
|
||||
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
|
||||
|
||||
/* SysTick Current Register Definitions */
|
||||
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
|
||||
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
|
||||
|
||||
/* SysTick Calibration Register Definitions */
|
||||
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
|
||||
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||||
|
||||
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
|
||||
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||||
|
||||
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
|
||||
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
|
||||
|
||||
/*@} end of group CMSIS_SysTick */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
|
||||
\brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
|
||||
Therefore they are not covered by the Cortex-M1 header file.
|
||||
@{
|
||||
*/
|
||||
/*@} end of group CMSIS_CoreDebug */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_bitfield Core register bit field macros
|
||||
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Mask and shift a bit field value for use in a register bit range.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted value.
|
||||
*/
|
||||
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
|
||||
|
||||
/**
|
||||
\brief Mask and shift a register value to extract a bit filed value.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted bit field value.
|
||||
*/
|
||||
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
|
||||
|
||||
/*@} end of group CMSIS_core_bitfield */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_base Core Definitions
|
||||
\brief Definitions for base addresses, unions, and structures.
|
||||
@{
|
||||
*/
|
||||
|
||||
/* Memory mapping of Core Hardware */
|
||||
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
|
||||
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
|
||||
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
|
||||
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
|
||||
|
||||
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
|
||||
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
|
||||
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
|
||||
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
|
||||
|
||||
|
||||
/*@} */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Hardware Abstraction Layer
|
||||
Core Function Interface contains:
|
||||
- Core NVIC Functions
|
||||
- Core SysTick Functions
|
||||
- Core Register Access Functions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ########################## NVIC functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
|
||||
\brief Functions that manage interrupts and exceptions via the NVIC.
|
||||
@{
|
||||
*/
|
||||
|
||||
#ifdef CMSIS_NVIC_VIRTUAL
|
||||
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
|
||||
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
|
||||
#define NVIC_EnableIRQ __NVIC_EnableIRQ
|
||||
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
|
||||
#define NVIC_DisableIRQ __NVIC_DisableIRQ
|
||||
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
|
||||
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
|
||||
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
|
||||
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */
|
||||
#define NVIC_SetPriority __NVIC_SetPriority
|
||||
#define NVIC_GetPriority __NVIC_GetPriority
|
||||
#define NVIC_SystemReset __NVIC_SystemReset
|
||||
#endif /* CMSIS_NVIC_VIRTUAL */
|
||||
|
||||
#ifdef CMSIS_VECTAB_VIRTUAL
|
||||
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetVector __NVIC_SetVector
|
||||
#define NVIC_GetVector __NVIC_GetVector
|
||||
#endif /* (CMSIS_VECTAB_VIRTUAL) */
|
||||
|
||||
#define NVIC_USER_IRQ_OFFSET 16
|
||||
|
||||
|
||||
/* The following EXC_RETURN values are saved the LR on exception entry */
|
||||
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
|
||||
|
||||
|
||||
/* Interrupt Priorities are WORD accessible only under Armv6-M */
|
||||
/* The following MACROS handle generation of the register offset and byte masks */
|
||||
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
||||
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
|
||||
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
||||
|
||||
#define __NVIC_SetPriorityGrouping(X) (void)(X)
|
||||
#define __NVIC_GetPriorityGrouping() (0U)
|
||||
|
||||
/**
|
||||
\brief Enable Interrupt
|
||||
\details Enables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
__COMPILER_BARRIER();
|
||||
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__COMPILER_BARRIER();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Enable status
|
||||
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt is not enabled.
|
||||
\return 1 Interrupt is enabled.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable Interrupt
|
||||
\details Disables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Pending Interrupt
|
||||
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt status is not pending.
|
||||
\return 1 Interrupt status is pending.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Pending Interrupt
|
||||
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clear Pending Interrupt
|
||||
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Priority
|
||||
\details Sets the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\param [in] priority Priority to set.
|
||||
\note The priority cannot be set for every processor exception.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
else
|
||||
{
|
||||
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Priority
|
||||
\details Reads the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Interrupt Priority.
|
||||
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
|
||||
{
|
||||
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
else
|
||||
{
|
||||
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Encode Priority
|
||||
\details Encodes the priority for an interrupt with the given priority group,
|
||||
preemptive priority value, and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [in] PreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [in] SubPriority Subpriority value (starting from 0).
|
||||
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
|
||||
*/
|
||||
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
return (
|
||||
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
|
||||
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Decode Priority
|
||||
\details Decodes an interrupt priority value with a given priority group to
|
||||
preemptive priority value and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
|
||||
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [out] pSubPriority Subpriority value (starting from 0).
|
||||
*/
|
||||
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
|
||||
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Vector
|
||||
\details Sets an interrupt vector in SRAM based interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
Address 0 must be mapped to SRAM.
|
||||
\param [in] IRQn Interrupt number
|
||||
\param [in] vector Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)0x0U;
|
||||
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
|
||||
/* ARM Application Note 321 states that the M1 does not require the architectural barrier */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Vector
|
||||
\details Reads an interrupt vector from interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)0x0U;
|
||||
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief System Reset
|
||||
\details Initiates a system reset request to reset the MCU.
|
||||
*/
|
||||
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
|
||||
{
|
||||
__DSB(); /* Ensure all outstanding memory accesses included
|
||||
buffered write are completed before reset */
|
||||
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
|
||||
SCB_AIRCR_SYSRESETREQ_Msk);
|
||||
__DSB(); /* Ensure completion of memory access */
|
||||
|
||||
for(;;) /* wait until reset */
|
||||
{
|
||||
__NOP();
|
||||
}
|
||||
}
|
||||
|
||||
/*@} end of CMSIS_Core_NVICFunctions */
|
||||
|
||||
|
||||
/* ########################## FPU functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_FpuFunctions FPU Functions
|
||||
\brief Function that provides FPU type.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief get FPU type
|
||||
\details returns the FPU type
|
||||
\returns
|
||||
- \b 0: No FPU
|
||||
- \b 1: Single precision FPU
|
||||
- \b 2: Double + Single precision FPU
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
|
||||
{
|
||||
return 0U; /* No FPU */
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_FpuFunctions */
|
||||
|
||||
|
||||
|
||||
/* ################################## SysTick function ############################################ */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
|
||||
\brief Functions that configure the System.
|
||||
@{
|
||||
*/
|
||||
|
||||
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
|
||||
|
||||
/**
|
||||
\brief System Tick Configuration
|
||||
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||||
Counter is in free running mode to generate periodic interrupts.
|
||||
\param [in] ticks Number of ticks between two interrupts.
|
||||
\return 0 Function succeeded.
|
||||
\return 1 Function failed.
|
||||
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
||||
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
||||
must contain a vendor-specific implementation of this function.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
|
||||
{
|
||||
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
|
||||
{
|
||||
return (1UL); /* Reload value impossible */
|
||||
}
|
||||
|
||||
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
||||
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_TICKINT_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
|
||||
return (0UL); /* Function successful */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*@} end of CMSIS_Core_SysTickFunctions */
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM1_H_DEPENDANT */
|
||||
|
||||
#endif /* __CMSIS_GENERIC */
|
||||
Loaded 100 of 1955 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user